Haybusa Parts and Service Member Support

Author Topic: what's ur best 60' 1/8  (Read 122348 times)

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #100 on: April 14, 2009, 11:18:04 PM »
improved my times
60' 1.54 bike didnt shift 2nd
1/8 5.94 @ 128 mph with a 1.61 60'
1/4 9.06 @ 158 mph
 turbo with a 6 lb spring 333 suited, 67-68 wb

hell yeah. now that getting it done
thanks man, let us know how you do with the extra hp and tq  :thumb:

Offline Patterson

  • Rider
  • ***
  • Posts: 485
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #101 on: April 19, 2009, 01:06:35 PM »
improved my times
60' 1.54 bike didnt shift 2nd
1/8 5.94 @ 128 mph with a 1.61 60'
1/4 9.06 @ 158 mph
 turbo with a 6 lb spring 333 suited, 67-68 wb

hell yeah. now that getting it done
thanks man, let us know how you do with the extra hp and tq  :thumb:

results are in :D

1.57 60ft
6.12 1/8 @ 116 (+2mph than last time)

whats funny is i was getting 1.54 60's all night but the highest one of the night i got the fastest ET and mph. and it didn't wheelie. :?
i think it has a little more in it so a little more seat time i hope to see some 6.0's

Offline J.R.

  • Post Whore
  • ****
  • Posts: 800
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #102 on: April 20, 2009, 08:38:37 AM »
results are in :D

1.57 60ft
6.12 1/8 @ 116 (+2mph than last time)

whats funny is i was getting 1.54 60's all night but the highest one of the night i got the fastest ET and mph. and it didn't wheelie. :?
i think it has a little more in it so a little more seat time i hope to see some 6.0's
Good job!! :thumb:
The Wizard
Old dudes still can get it done!! Old age and treachery will overcome youth and enthusiasm every time!

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #103 on: April 20, 2009, 12:02:24 PM »
improved my times
60' 1.54 bike didnt shift 2nd
1/8 5.94 @ 128 mph with a 1.61 60'
1/4 9.06 @ 158 mph
 turbo with a 6 lb spring 333 suited, 67-68 wb

hell yeah. now that getting it done
thanks man, let us know how you do with the extra hp and tq  :thumb:

results are in :D

1.57 60ft
6.12 1/8 @ 116 (+2mph than last time)

whats funny is i was getting 1.54 60's all night but the highest one of the night i got the fastest ET and mph. and it didn't wheelie. :?
i think it has a little more in it so a little more seat time i hope to see some 6.0's
:thumb:

Offline RR_monster

  • Apprentice Post Whore
  • **
  • Posts: 13
Re: what's ur best 60' 1/8
« Reply #104 on: April 25, 2009, 12:22:56 AM »
1.50-1.53    6.0X's
243lbs unsuited, 65in  16-44
zx14

fresh clutches in, hoping for 5.9x's next time out.


any 1441 heavy hitter numbers?

Offline Patterson

  • Rider
  • ***
  • Posts: 485
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #105 on: May 01, 2009, 10:12:37 AM »
gett'n a little better 1.53 but the clutch gave way  :cry:

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #106 on: May 01, 2009, 11:48:03 AM »
gett'n a little better 1.53 but the clutch gave way  :cry:
:thumb:

Offline fubar569

  • OFF TOPIC
  • Rider
  • **********
  • Posts: 485
Re: what's ur best 60' 1/8
« Reply #107 on: May 01, 2009, 01:18:37 PM »
my personal best 60ft time came on my 2nd day at the dragstrip

i am stock wheelbase, stock ride height, stock Battlax BT56 tire, and Stock air pressure (to the sticker on the bike)

i cut a 1.67 60ft then proceeded to miss every shift on the way down the track!  :evil: :evil: :evil: :evil: :evil: :bigfu: :grnt: :cussing: :cussing: :cussing: :mad1: :mad1: :mad1:

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #108 on: May 01, 2009, 01:48:03 PM »
my personal best 60ft time came on my 2nd day at the dragstrip

i am stock wheelbase, stock ride height, stock Battlax BT56 tire, and Stock air pressure (to the sticker on the bike)

i cut a 1.67 60ft then proceeded to miss every shift on the way down the track!  :evil: :evil: :evil: :evil: :evil: :bigfu: :grnt: :cussing: :cussing: :cussing: :mad1: :mad1: :mad1:
damn thats not bad, you set that bike up and you gonna be rolling  :thumb:

Offline fubar569

  • OFF TOPIC
  • Rider
  • **********
  • Posts: 485
Re: what's ur best 60' 1/8
« Reply #109 on: May 01, 2009, 01:59:23 PM »
my personal best 60ft time came on my 2nd day at the dragstrip

i am stock wheelbase, stock ride height, stock Battlax BT56 tire, and Stock air pressure (to the sticker on the bike)

i cut a 1.67 60ft then proceeded to miss every shift on the way down the track!  :evil: :evil: :evil: :evil: :evil: :bigfu: :grnt: :cussing: :cussing: :cussing: :mad1: :mad1: :mad1:
damn thats not bad, you set that bike up and you gonna be rolling  :thumb:

thanks! - I'm just having a hell of a time learning how to do everything right at once for a single pass. best et is a 10.667 @ 136ish w/ 1.86 60ft...the best 60ft is the mentioned 1.67 and best mph to date is 139.7...only had the bike at the dragstrip twice on 2 separate days for a total of 25-30 passes...i cannot go 100% throttle out of the hole or i seem to get a great glimpse of the sky...once the bike is sitting a bit lower i intend to really goose it out of the gate...

if i could put the total package together for ONE PASS...i know i could nail off some base 10's on my current setup...i'm trying not to do anything radical to the bike's suspension/setup as the dragstrip is a 4hr round trip ride and i do ride the entire way to and from...

I have the small mod, Brock's StreetSmart system, and a PCIII - i'll be moving to ECU flashing soon as i have the harness installed and the ECU repinned. I also have the BoostBySmith NOS harness installed and waiting on a kit. Once i get the nitrous installed i'm going to a dyno to have the whole bike dialed in. Then comes the hard part of getting the bike's suspension set up for my "fat" ass (210lbs in jeans/shirt)...

Offline Patterson

  • Rider
  • ***
  • Posts: 485
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #110 on: May 04, 2009, 11:13:09 PM »
my personal best 60ft time came on my 2nd day at the dragstrip

i am stock wheelbase, stock ride height, stock Battlax BT56 tire, and Stock air pressure (to the sticker on the bike)

i cut a 1.67 60ft then proceeded to miss every shift on the way down the track!  :evil: :evil: :evil: :evil: :evil: :bigfu: :grnt: :cussing: :cussing: :cussing: :mad1: :mad1: :mad1:
damn thats not bad, you set that bike up and you gonna be rolling  :thumb:


thanks! - I'm just having a hell of a time learning how to do everything right at once for a single pass. best et is a 10.667 @ 136ish w/ 1.86 60ft...the best 60ft is the mentioned 1.67 and best mph to date is 139.7...only had the bike at the dragstrip twice on 2 separate days for a total of 25-30 passes...i cannot go 100% throttle out of the hole or i seem to get a great glimpse of the sky...once the bike is sitting a bit lower i intend to really goose it out of the gate...

if i could put the total package together for ONE PASS...i know i could nail off some base 10's on my current setup...i'm trying not to do anything radical to the bike's suspension/setup as the dragstrip is a 4hr round trip ride and i do ride the entire way to and from...

I have the small mod, Brock's StreetSmart system, and a PCIII - i'll be moving to ECU flashing soon as i have the harness installed and the ECU repinned. I also have the BoostBySmith NOS harness installed and waiting on a kit. Once i get the nitrous installed i'm going to a dyno to have the whole bike dialed in. Then comes the hard part of getting the bike's suspension set up for my "fat" ass (210lbs in jeans/shirt)...

@210lbs if you get the suspention right you should click in the 9's with what you got. i went 9.70's with stock motor, pipe, small box, no tune. That was my 2nd pass on that bike. its all seat time. good luck with your times. keep the front down  :lol:

Offline boostdoctor

  • New User!
  • *
  • Posts: 3
Re: what's ur best 60' 1/8
« Reply #111 on: March 25, 2010, 11:48:53 PM »
05 Busa, 271 lbs in street clothes
16/45 gearing, murray SW, completely stock motor and clutch, +8 extensions, iightened
1.44 60ft
5.94@119
best mph 120

my buddies think it's built. lol

Offline Razor8

  • Rider
  • ***
  • Posts: 106
Re: what's ur best 60' 1/8
« Reply #112 on: March 26, 2010, 02:54:15 PM »
1.50-1.53    6.0X's
243lbs unsuited, 65in  16-44
zx14

fresh clutches in, hoping for 5.9x's next time out.


any 1441 heavy hitter numbers?

  1.48 60' 5.85   9.04  255 Unsuited sittin @ 64.5"

Offline jblankenship

  • Rider
  • ***
  • Posts: 281
Re: what's ur best 60' 1/8
« Reply #113 on: April 05, 2010, 10:25:29 PM »
205-210 suited 1.28 on 05 1000 slider clutch 1.34 hand on 04 busa

Offline Patrick10R

  • Post Whore
  • ****
  • Posts: 601
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #114 on: April 05, 2010, 10:42:20 PM »
I've gone 1.62 now on a 08 ZX-10 with a 6" stretch, hand clutch.

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: what's ur best 60' 1/8
« Reply #115 on: May 22, 2010, 11:42:02 AM »
03 Busa stage one with Mitsu 20g tuned @11#'s Stretched to 68"

279 pounds in shorts!

Best 60'=1.54
Best 1/8=5.72@133
Best 1/4=8.74@164

Still trying to figure out the MTC Multi Stage clutch.
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline Coryonbusa

  • Mad Post Whore
  • ******
  • Posts: 4705
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #116 on: May 24, 2010, 04:25:41 PM »
14#, 68, 260, 1.59 missed 2nd gear ran a 6.3~, 1/8. Still learning. :thumb:

Best 1/8 was a 6.00 @ 125~ with a 1.6~ 60'


New best! 1.47- 3.83 - 5.79 @ 124.83

Prolly 230 suited now. Still figuring out the hand slider. :thumb:

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #117 on: May 26, 2010, 12:39:53 PM »
14#, 68, 260, 1.59 missed 2nd gear ran a 6.3~, 1/8. Still learning. :thumb:

Best 1/8 was a 6.00 @ 125~ with a 1.6~ 60'


New best! 1.47- 3.83 - 5.79 @ 124.83

Prolly 230 suited now. Still figuring out the hand slider. :thumb:
boy you really dropped those numbers man  :thumb:

Offline b l u e b u s a 1

  • Rider
  • ***
  • Posts: 451
  • Gender: Male
Re: what's ur best 60' 1/8
« Reply #118 on: May 26, 2010, 01:00:26 PM »
1.33 60ft   5.1 1/8   151mph  hays clutch is hard to beat :thumb:

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: what's ur best 60' 1/8
« Reply #119 on: January 20, 2011, 12:53:41 PM »
Gaind weight! DAMN 285 in shorts now

however i took some off the bike

new best

60'=1.43
1/8=5.47@134
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline Super Kaz

  • Rider
  • ***
  • Posts: 177
  • Gender: Male
  • I JUST WANT 2 RACE ~!!!
    • www.superkazracing.com
Re: what's ur best 60' 1/8
« Reply #120 on: January 20, 2011, 02:11:00 PM »
1.05 on a Good Prepped Track  :twisted: !

4.50's@150ish,but that is on a PSM Bike {slick & wheelie bar }.

 { I'm 5'8",and  about 140lbs unsuited }

That is on 1 of the School Bikes with a nice little tune up.

I can't wait to Race the Fast Bikes {GOD WILLING :angel: }

This Season..............
Owner,Designer,Builder,and Racer of The Worlds Fastest and  Most Powerful Street Legal Harley Davidson Motorcycle Racer.

1st to go 200+mph@ Bonneville.

Turbo V-rod Master Builder,Racer,Breaker,and Fixer

Future Pro Stock Bike Champion...........

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: what's ur best 60' 1/8
« Reply #121 on: January 20, 2011, 02:22:30 PM »
140? man take two of you on the bike to be Heavy Hitter!!! :D
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline Super Kaz

  • Rider
  • ***
  • Posts: 177
  • Gender: Male
  • I JUST WANT 2 RACE ~!!!
    • www.superkazracing.com
Re: what's ur best 60' 1/8
« Reply #122 on: January 20, 2011, 02:28:57 PM »
140? man take two of you on the bike to be Heavy Hitter!!! :D

Race Day is more like 135lbs,but I was trying to be Nice :wink: !

Having to be a Jockey sure does save on the Groceries though :crzy:.....
Owner,Designer,Builder,and Racer of The Worlds Fastest and  Most Powerful Street Legal Harley Davidson Motorcycle Racer.

1st to go 200+mph@ Bonneville.

Turbo V-rod Master Builder,Racer,Breaker,and Fixer

Future Pro Stock Bike Champion...........

Offline fatnslow

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1970
  • Where am I?
Re: what's ur best 60' 1/8
« Reply #123 on: January 21, 2011, 02:35:45 PM »
5.86 @ 131 mph 350lbs in shorts.

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: what's ur best 60' 1/8
« Reply #124 on: January 21, 2011, 02:43:03 PM »
thats hauling the groceries the F&S!!! NPR tomorrow?
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street