Camshaft help

[KOSS]

I was just about to fit some adjustable cam sprockets and noticed a problem.
The dowel for the cam position sensor is in the wrong place according to my manual.
Am I missing something? or is the manual wrong?
Pictures will explain better.

Note the dowel at 10 O clock and the cut out at 12.



My dowel is at 2 O clock



 

[gnd111]

You can look at the lones pic and line them up from there and it will work as long as you pins are correct on the chain.  That pic is a reference only...

[KOSS]

Thanks, But do yo mean the cam lobes pic ? I don't doubt the cam sprocket pics in the manual but why make a reference to the cam position dowel/pin for the sensor in a totally different position. Does this mean that all other items in the manual are wrong and for reference only?

Not getting at you Bro, But I would expect a Suzuki manual to be accurate.

[KOSS]

Does every one else's dowel point to two O clock in this position?

[gazza414]

Picture explains everything

you've missed something..keep on lookin