Haybusa Parts and Service Member Support
« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: dry spray bar  (Read 20314 times)

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #25 on: March 29, 2009, 09:03:59 AM »
Sorry to keep you waiting but it rained on Friday and I didnt get a clean pass. I will hit it again on Friday. The dyno showed some good results so if I can ride it should be pretty fast.
Logged
Altiki Racing Hayabusa Forever

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #26 on: April 04, 2009, 08:45:07 AM »
Finally got some passes last night and the tuning is taking a little longer than I thought but it was able to run an 8.86 pass and was still way to rich. Lots of fuel was added for the MPS bar so with a little more tuning I am hoping for low 8's possible 7.90s. The MPS guys have been fantastic in assesting me so I am extremely pleased thus far. If you are going large the spider is a must.
Logged
Altiki Racing Hayabusa Forever

Offline SlipFit02

  • Rider
  • ***
  • Posts: 81
  • Yeah, I Know!,"Ride Till The End Ball Till I Fall"
Re: dry spray bar
« Reply #27 on: April 04, 2009, 08:51:59 AM »
How big of a shot is on the bike? Also what size motor,Rider ECt... :thumb:
Logged
Quantum Motorsports
02 Busa' "PANIC ATTACK
Outlawfabshop.com
Port-tech

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: dry spray bar
« Reply #28 on: April 04, 2009, 09:28:42 AM »
al,the bike sounded good last night,i hope to get my hays clutch figured out by sunday??are you going sunday funday???????
Logged
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: dry spray bar
« Reply #29 on: April 04, 2009, 09:29:23 AM »
slip fit,your maps are on the way.
Logged
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #30 on: April 04, 2009, 10:19:57 AM »
Mark
I would like to try, I heard the weather will be great, it is all in my wife's hands at this point. I better start cleaning the house instead of working on the bike. I will let you know later.

Slip fit
I am running two stages 60 on the first 120 on the second, that's what is making the tuning so rough. I have two separate maps one for the first and one for the second that switches on the fly. The bike is stock displacement and I am 180lb.
Logged
Altiki Racing Hayabusa Forever

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: dry spray bar
« Reply #31 on: April 04, 2009, 10:45:20 AM »
Damn...that's alot of Nitrous!  How much power did it make on motor?

 I would have to agree that S2000's aren't big enough  :lol: Those 62's should do it.
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline Gixx1525R

  • Rider
  • ***
  • Posts: 153
  • Where am I?
Re: dry spray bar
« Reply #32 on: April 04, 2009, 11:28:12 AM »
Quote from: altiki on April 04, 2009, 10:19:57 AM
Mark
I would like to try, I heard the weather will be great, it is all in my wife's hands at this point. I better start cleaning the house instead of working on the bike. I will let you know later.

Slip fit
I am running two stages 60 on the first 120 on the second, that's what is making the tuning so rough. I have two separate maps one for the first and one for the second that switches on the fly. The bike is stock displacement and I am 180lb.

I though you were only running 8.80s at Orlando Speedworld in the low 160mph range
Logged

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #33 on: April 04, 2009, 11:55:56 AM »
I was until I went lean on my old set up which was two stages but it was about a 100 shot and it went 8.59 and a 8.62 at night of fire. Burn a piston so I went with drop in's and all the other goodies. If you would have seen my early runs you would know why I was happy with the 8'80 last night. Check the link out.

The back fire shut the bike off and blew my air box into two pieces.

http://www.youtube.com/watch?v=r7UduarPVco
Logged
Altiki Racing Hayabusa Forever

Offline Gixx1525R

  • Rider
  • ***
  • Posts: 153
  • Where am I?
Re: dry spray bar
« Reply #34 on: April 04, 2009, 12:14:16 PM »
Quote from: altiki on April 04, 2009, 11:55:56 AM
I was until I went lean on my old set up which was two stages but it was about a 100 shot and it went 8.59 and a 8.62 at night of fire. Burn a piston so I went with drop in's and all the other goodies. If you would have seen my early runs you would know why I was happy with the 8'80 last night. Check the link out.

The back fire shut the bike off and blew my air box into two pieces.

http://www.youtube.com/watch?v=r7UduarPVco

Yes I have seen your runs at OSW.
Logged

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: dry spray bar
« Reply #35 on: April 04, 2009, 12:16:03 PM »
gixx1525....is that you nick?
Logged
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #36 on: April 04, 2009, 12:45:22 PM »
Mark, your bike is looking really good dial that clutch in and it will be a monster.

As for the Sunday funday (No Go) she flipped out when I asked.  See ya next Friday though.
Logged
Altiki Racing Hayabusa Forever

Offline Gixx1525R

  • Rider
  • ***
  • Posts: 153
  • Where am I?
Re: dry spray bar
« Reply #37 on: April 04, 2009, 02:57:03 PM »
Logged

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: dry spray bar
« Reply #38 on: April 04, 2009, 03:37:48 PM »
Quote from: altiki on April 04, 2009, 12:45:22 PM
Mark, your bike is looking really good dial that clutch in and it will be a monster.

As for the Sunday funday (No Go) she flipped out when I asked.  See ya next Friday though.
thanks al,i am going to put more weight on the arms and stop that beast from powering through the plates!! :hys:..i am coming loaded for bear next friday.. :thumb:
Logged
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline altiki

  • Rider
  • ***
  • Posts: 217
  • Gender: Male
Re: dry spray bar
« Reply #39 on: April 04, 2009, 04:22:04 PM »
Dont tell my wife but I have been working on it all day.  :D

I will be ready by Friday.  :thumb:
Logged
Altiki Racing Hayabusa Forever

Offline aftermath

  • Rider
  • ***
  • Posts: 34
Re: dry spray bar
« Reply #40 on: April 21, 2009, 12:58:59 PM »
nice
Logged
Pages: 1 [2]  All   Go Up
« previous next »