News:
ALL UNREAD TOPICS
Advertising info
Contact Us
Home
Help
Login
Register
SuzukiHayabusa.org
»
TECHNICAL
»
GEN II BUSA
»
k8 plastic fairings
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: k8 plastic fairings (Read 4070 times)
Tweet
antonio1234
Rider
Posts: 28
k8 plastic fairings
«
on:
November 09, 2008, 09:47:10 PM »
This week I am going to be replacing the two pieces of the right side fairing...any tips or advice I can get before I go at it? Thanks in advance!
Logged
VegasDude
Legacy Rider
Post Master
Posts: 1467
Re: k8 plastic fairings
«
Reply #1 on:
November 11, 2008, 10:26:07 PM »
If you want the removal to be easy then remove the inner fairings (under the nose and sides) before removing the outer fairings. When you have the inner fairings removed, then from the inside slip your fingers between the seam of the upper fairing and lowerfairing and push and the fairing will practically fall out without excess pressure on the tabs.................!
Logged
2008 Busa
2007 Ducati 999S
2006 BMW K1200S
holdontighter
Post Whore
Posts: 676
Gender:
Re: k8 plastic fairings
«
Reply #2 on:
November 14, 2008, 01:12:10 AM »
yup or you can spread the inner fairings from the side fairings also...you just have to remove the plastic tab that covers the oilcooler
idk comes off easy like that for me and i dont have to mess around with the inners.....
if that made sense
Logged
brian311b
New User!
Posts: 1
Gender:
Re: k8 plastic fairings
«
Reply #3 on:
February 11, 2009, 06:06:10 PM »
Go to Powersportspro.com and follow the drop boxes till you get to the bike. It shows all the bolts, spacers, and so on. Easy to follow and easy to make sure you haven't missed anything.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
SuzukiHayabusa.org
»
TECHNICAL
»
GEN II BUSA
»
k8 plastic fairings