Haybusa Parts and Service Member Support

Author Topic: removing front fender  (Read 5239 times)

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
removing front fender
« on: November 27, 2008, 11:49:46 AM »
Does the front wheel need to come off before the fender?
and will a pitbull new front stand work to remove the wheel?  pin #6
on pitbulls website it say you need to remove the fender
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!

Offline roy

  • Apprentice Post Whore
  • **
  • Posts: 8
Re: removing front fender
« Reply #1 on: December 01, 2008, 01:49:29 PM »
Wheel will need to come off 1st for fender removal. Once the wheel is off and fender completely loose turn it sideways and it will come out. Might want to add some trim tape on it to prevent scratch's from the fork tubes as you work it down and out. The pitbull stem stand might work well enough not sure I know a pitbull forklift type stand works well for removing a fender and wheel on a GSXR see no reason why it would not work on a B-King.

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
Re: removing front fender
« Reply #2 on: December 01, 2008, 07:11:54 PM »
ok thanks for the info
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!