Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Busa swingarm to GSXR1000?  (Read 11167 times)

Offline prosb

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Busa swingarm to GSXR1000?
« on: December 09, 2008, 12:41:21 AM »
Does anyone know how long is Busa's swingarm and will it fit to 01-02 GSXR1000 frame?

I was just thinking that if Busa have longer swingarm than 1000 and it fit to the frame, then I should make a change so I don't need to keep those swingarm extensions. My WB have to be max 59".
« Last Edit: January 14, 2009, 12:14:43 AM by prosb »
Logged
gsxr 1000 258rwhp@15psi

Offline 13

  • Post Whore
  • ****
  • Posts: 571
  • Gender: Male
  • crazy
Re: Busa swingarm to GSXR1000?
« Reply #1 on: December 10, 2008, 08:19:37 AM »
the busa arm is 2 inches longer than  a 1k,  and it will fit, cause i put600 arms on busa's
Logged
Self Appointed Smart Ass

Offline prosb

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Re: Busa swingarm to GSXR1000?
« Reply #2 on: December 11, 2008, 12:00:30 AM »
Great, thanks.
Logged
gsxr 1000 258rwhp@15psi

Offline SPEEDO1005

  • Apprentice Post Whore
  • **
  • Posts: 16
  • Gender: Male
  • Where am I?
Re: Busa swingarm to GSXR1000?
« Reply #3 on: March 01, 2009, 08:59:15 PM »
I have a 4'' track i just took off my 0-3 to put a 10'' velocity on it i have not rode it yet but i am going to sell the 4'' i gave 1200$ for it from velocity i will try to sell it for 600 when i get back home from work in 2 weeks 
Logged

Offline prosb

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Re: Busa swingarm to GSXR1000?
« Reply #4 on: March 01, 2009, 11:52:07 PM »
Do you have any pics? And is it for busa or 1000?
« Last Edit: March 02, 2009, 11:59:16 PM by prosb »
Logged
gsxr 1000 258rwhp@15psi

Offline SPEEDO1005

  • Apprentice Post Whore
  • **
  • Posts: 16
  • Gender: Male
  • Where am I?
Re: Busa swingarm to GSXR1000?
« Reply #5 on: March 05, 2009, 03:42:40 AM »
IT IS A GSXR1000 I CANT FIGURE OUT TO POST PICTURE
Logged

Offline prosb

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Re: Busa swingarm to GSXR1000?
« Reply #6 on: March 05, 2009, 05:22:28 AM »
You have to upload pictures for example http://imageshack.us/ and then you can link pictures address here.




Can you measure between the center of the pivot axle to middle of the rear axle adjustment? And also measure the axle adjustment hole.

Logged
gsxr 1000 258rwhp@15psi

Offline rotamonkey

  • Rider
  • ***
  • Posts: 88
Re: Busa swingarm to GSXR1000?
« Reply #7 on: April 03, 2009, 11:11:23 PM »
does anyone know which year models hayabusa arms are a direct fit for k1-k2 1000?
Logged

Offline Oz Booster

  • Site Donor
  • Mad Post Whore
  • *
  • Posts: 3968
  • aka Maj T
Re: Busa swingarm to GSXR1000?
« Reply #8 on: April 05, 2009, 04:46:19 PM »
02-07 busa's are all the same fit, made the srad 750 much easier to ride on boost when a mate did it to his .
Logged
Official Site Donor

Offline Red

  • Post Master
  • *****
  • Posts: 1355
  • Gender: Male
    • http://www.revival.tv
Re: Busa swingarm to GSXR1000?
« Reply #9 on: July 10, 2009, 09:35:59 PM »
Quote from: SPEEDO1005 on March 05, 2009, 03:42:40 AM


IT IS A GSXR1000 I CANT FIGURE OUT TO POST PICTURE



You still got that 4" over swing arm . . .

What year is your GSXR ?

Red,    *<(:{)-
Logged
1999 Prostar West Super Gas Champion !
2000 NMRA / Prostar Pro E/T runner up.
2001, 2002, & 2003 NMRA Pro E/T Champion !
2004 #3, 2005, & 2006 NMRA Pro E/T runner up.
2007 Pro. St. Legal #6, NMRA Pro E/T Champion !
2008 MDRA Super Streetbike Champion !

Offline king86

  • Apprentice Post Whore
  • **
  • Posts: 16
Re: Busa swingarm to GSXR1000?
« Reply #10 on: August 24, 2009, 10:43:32 PM »
are the swingarms the same on k7 1000's? as in will the 02-07 busa swingarms fit fine?
Logged

Offline rotamonkey

  • Rider
  • ***
  • Posts: 88
Re: Busa swingarm to GSXR1000?
« Reply #11 on: August 25, 2009, 03:08:46 AM »
I think they have a different linkage mount on the bottom... I am pretty sure anyway was going to use a k9 arm on my thou but ended up going for a busa because the k9 linkage is different, could probably modify it fit pretty easily though... not 100% sure though
Logged

Offline king86

  • Apprentice Post Whore
  • **
  • Posts: 16
Re: Busa swingarm to GSXR1000?
« Reply #12 on: August 25, 2009, 10:31:18 AM »
hum, i wonder what arm is just a little longer then the k7 but is a dirrect replacement..?
Logged

Offline rotamonkey

  • Rider
  • ***
  • Posts: 88
Re: Busa swingarm to GSXR1000?
« Reply #13 on: August 25, 2009, 07:04:30 PM »
actually I think the k9 might be a direct replacement for the k7 and I heard it was 2 inches longer but youd have to check that out yourself
Logged
Pages: [1]   Go Up
« previous next »