Haybusa Parts and Service Member Support

Author Topic: k8 plastic fairings  (Read 2138 times)

Offline antonio1234

  • Rider
  • ***
  • Posts: 28
k8 plastic fairings
« on: November 09, 2008, 09:47:10 PM »
This week I am going to be replacing the two pieces of the right side fairing...any tips or advice I can get before I go at it?  Thanks in advance!

Offline VegasDude

  • Legacy Rider
  • Post Master
  • *
  • Posts: 1467
Re: k8 plastic fairings
« Reply #1 on: November 11, 2008, 10:26:07 PM »
If you want the removal to be easy then remove the inner fairings (under the nose and sides) before removing the outer fairings. When you have the inner fairings removed, then from the inside slip your fingers between the seam of the upper fairing and lowerfairing and push and the fairing will practically fall out without excess pressure on the tabs.................! :thumb:
2008 Busa
2007 Ducati 999S
2006 BMW K1200S

Offline holdontighter

  • Post Whore
  • ****
  • Posts: 676
  • Gender: Male
Re: k8 plastic fairings
« Reply #2 on: November 14, 2008, 01:12:10 AM »
yup or you can spread the inner fairings from the side fairings also...you just have to remove the plastic tab that covers the oilcooler
idk  comes off easy like that for me and i dont have to mess around with the inners.....
if that made sense

Offline brian311b

  • New User!
  • *
  • Posts: 1
  • Gender: Male
Re: k8 plastic fairings
« Reply #3 on: February 11, 2009, 06:06:10 PM »
Go to Powersportspro.com and follow the drop boxes till you get to the bike.  It shows all the bolts, spacers, and so on.  Easy to follow and easy to make sure you haven't missed anything.