Haybusa Parts and Service Member Support

Author Topic: Anybody slapped a turbo on a GEN 2 Boosa?  (Read 4783 times)

Offline BoosaRyder

  • Rider
  • ***
  • Posts: 277
  • Gender: Male
Anybody slapped a turbo on a GEN 2 Boosa?
« on: January 03, 2009, 08:32:04 AM »
I am interested in building a 2009 Turbo Boosa and wanted to see if anyone else has the same idea.

 :thumb:
2000 Red/Gray Hayabusa
2006 Black M109R (sold)
2007 Black ZX-14 Ninja
1999 Red Twin Turbo Corvette

Offline Spaz Racing

  • Restricted
  • Rider
  • ***
  • Posts: 397
  • Gender: Male
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #1 on: January 03, 2009, 12:42:24 PM »
Sonny told me Brock did. but scraped the project. Sonny said the bike just didn't wanna go any where n was hard to ride.
Bently1 did one also. He sold it after it really didn't go any faster then his modded stock motor busa. Found out its a lot of up keep and maintenance on a turbo bike.
I am sure there are ones out the running good. There was one or two in ama real street towards the end of the year running good.
« Last Edit: January 04, 2009, 08:16:47 AM by Spaz Racing »

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #2 on: January 03, 2009, 10:25:56 PM »
Mine could of definatley been faster but I learned with the turbos there is alot more money to spend then the turbo kit, And I did not feel like having 20,000 or better in a bike like that. plus I like going to test and tune' s and making lots of passes. imo you really need a secondary injector set up and boost controller then beef up the tranny etc. On motor I went 6.07 120mph with the turbo driving thru the clutch went 5.98 at 127.65! at 59 3/4 inch wheelbase. no weight on the front.
2008 Busa

Offline ANTDOG600

  • Mad Post Whore
  • ******
  • Posts: 2395
  • Gender: Male
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #3 on: January 07, 2009, 10:34:25 PM »
ghetto/homemade on mine and love it. 5lbs makes 240 on pump and rips for me! :thumb:

Offline Spaz Racing

  • Restricted
  • Rider
  • ***
  • Posts: 397
  • Gender: Male
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #4 on: January 08, 2009, 06:32:05 AM »
ghetto/homemade on mine and love it. 5lbs makes 240 on pump and rips for me! :thumb:

U said getto :rfl: any times? been to the track with it?
 U comin to Kokomo this year? Where havin a out out street race there this year.

Offline ANTDOG600

  • Mad Post Whore
  • ******
  • Posts: 2395
  • Gender: Male
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #5 on: January 08, 2009, 10:38:37 AM »
hahahaha, no tracktime at all.......hell...havent even ridden it that much, but it is fun as hell!
i might come up....havent been in a couple years. how is everything with you man?

Offline vettandtyphoon

  • Rider
  • ***
  • Posts: 29
Re: Anybody slapped a turbo on a GEN 2 Boosa?
« Reply #6 on: January 08, 2009, 05:49:47 PM »
brother in law has a 08 busa with a mt performance kit.  running 10psi on pump gas.. along with a 50 hit of spray   all work done from mt. in tennesse

he made 325rwhp at the tire with no spray .. he also has a 240 swing arm kit. tricky air ride, and a mccoy motorsports led kit  all bolts chomed different grips very nice bike.  will try to get some pics for you guys.