Author Topic: RCC SUPER ULTRA STREET BIKE (Read 200024 times) Tweet

1low04Busa · « **Reply #75 on:** February 14, 2009, 09:14:58 PM »

I think you will beat me gettin yours finished! all your parts look good

1low04Busa · « **Reply #76 on:** February 14, 2009, 09:18:59 PM »

Quote from: ACE23 on February 14, 2009, 01:03:45 PM

nice postal lady brought this to me today

You need your postal lady to bring me one of those to....l

ACE23 · « **Reply #77 on:** February 14, 2009, 10:32:05 PM »

Quote from: 1low04Busa on February 14, 2009, 09:14:58 PM

I think you will beat me gettin yours finished! all your parts look good

I don't know, my bike could be all put back together by next weekend "if" my stuff is back from the powdercoater....Then i gotta take it over to Cooper in GA. I'm going to ask them if I show up at 8AM if my bike can get tuned in 1 or 2 days. They are going to have to install the AMS-1000, TIC-1000, and put it on the dyno. It already has a base map so maybe it wont be so bad. Although I would rather have stuff done correct then rush somebody, but damn 8 hours is a long way to drive and drop off. Gonna get my paint done also while its getting tuned

1low04Busa · « **Reply #78 on:** February 14, 2009, 11:02:33 PM »

what kinda wheels you running? i seen you had a 240 rear tire?

ACE23 · « **Reply #79 on:** February 15, 2009, 12:55:00 AM »

Quote from: 1low04Busa on February 14, 2009, 11:02:33 PM

what kinda wheels you running? i seen you had a 240 rear tire?

some heavy ass rc components...i might put some CZ's on it later but I doubt it

Mike-Nightrider · « **Reply #80 on:** February 15, 2009, 04:20:29 AM »

Very nice ACE

quinton1967 · « **Reply #81 on:** February 15, 2009, 09:23:13 AM »

get a set of bst carbin fiber wheels in 240.my setup is some what like your

ACE23 · « **Reply #82 on:** February 15, 2009, 01:42:23 PM »

Quote from: quinton1967 on February 15, 2009, 09:23:13 AM

get a set of bst carbin fiber wheels in 240.my setup is some what like your

yeah I've seen your wheels and those are really nice and light as heck I bet, I used to like the carbon fiber look but I"m really not into it anymore

bobu · « **Reply #83 on:** February 15, 2009, 07:29:17 PM »

zat why u goin wit watermelon red

Nem · « **Reply #84 on:** February 15, 2009, 07:46:54 PM »

Get some magnesium wheels.....olmost as light as the cf wheels

ACE23 · « **Reply #85 on:** February 15, 2009, 11:00:37 PM »

Quote from: bobu on February 15, 2009, 07:29:17 PM

zat why u goin wit watermelon red

haha you know me changing up what colors I want on a daily basis. I'm sticking to the 07 blue I think. I saw one riding around earlier today and it looked pretty good I think with all the shiny black powdercoat it will look even better

ACE23 · « **Reply #86 on:** February 15, 2009, 11:03:59 PM »

Quote from: Nem on February 15, 2009, 07:46:54 PM

Get some magnesium wheels.....olmost as light as the cf wheels

Ah it would be nice but I'm not racing so the weight thing isn't a huge factor right now. I can always just crank up the boost lol....but seriously these RC component wheels weigh ALOT and I mean ALOT. I will weigh the tires and wheels before I put them back on. I'm starting by saying the back will weigh 25lb with tire

ACE23 · « **Reply #87 on:** February 16, 2009, 12:22:11 AM »

Quote from: ACE23 on February 15, 2009, 11:00:37 PM

Quote from: bobu on February 15, 2009, 07:29:17 PM
zat why u goin wit watermelon red
haha you know me changing up what colors I want on a daily basis. I'm sticking to the 07 blue I think. I saw one riding around earlier today and it looked pretty good I think with all the shiny black powdercoat it will look even better

see nobody should listen to anything I say about what color I might paint haha...I just saw a black bike and I love blacked out busas and then saw an 07 blue that didn't look so hot.

I should prob just go drop off the bodywork and tell the guy to suprise me

bobu · « **Reply #88 on:** February 16, 2009, 08:49:51 PM »

Looks good to me, like it is.

I just found stedmans dyno sheet on my bike, coopers 315 smokes stedmans 347 , at least it does on my bike.

ACE23 · « **Reply #89 on:** February 16, 2009, 09:05:11 PM »

Quote from: bobu on February 16, 2009, 08:49:51 PM

Looks good to me, like it is.

I just found stedmans dyno sheet on my bike, coopers 315 smokes stedmans 347 , at least it does on my bike.

yeah I agree sure does seem to run alot better

ACE23 · « **Reply #90 on:** February 17, 2009, 04:00:59 PM »

chain guard came in and fresh wheel bearings along with new cush drive

Patterson · « **Reply #91 on:** February 17, 2009, 05:05:41 PM »

who is this cooper in GA. you talking about?

ACE23 · « **Reply #92 on:** February 17, 2009, 05:52:58 PM »

Quote from: Patterson on February 17, 2009, 05:05:41 PM

who is this cooper in GA. you talking about?

Cooper Performance..Jerry 478-471-8900. "Bobu" had his bike tuned over there and some work done. Jerry Cooper builds NLR's motors ect.....I was overall impressed with the shop and reputation and experience with high performance motorcycles. I'm sure there are tons of great builders that are capable of putting together high HP bikes but he was the closest and I felt good about spending my money with Jerry

1low04Busa · « **Reply #93 on:** February 17, 2009, 06:13:03 PM »

Quote from: ACE23 on February 17, 2009, 05:52:58 PM

Quote from: Patterson on February 17, 2009, 05:05:41 PM
who is this cooper in GA. you talking about?
Cooper Performance..Jerry 478-471-8900. "Bobu" had his bike tuned over there and some work done. Jerry Cooper builds NLR's motors ect.....I was overall impressed with the shop and reputation and experience with high performance motorcycles. I'm sure there are tons of great builders that are capable of putting together high HP bikes but he was the closest and I felt good about spending my money with Jerry

I think thats where im taking mine next year to get freshend up.

ACE23 · « **Reply #94 on:** February 17, 2009, 06:51:14 PM »

Quote from: 1low04Busa on February 17, 2009, 06:13:03 PM

Quote from: ACE23 on February 17, 2009, 05:52:58 PM
Quote from: Patterson on February 17, 2009, 05:05:41 PM
who is this cooper in GA. you talking about?
Cooper Performance..Jerry 478-471-8900. "Bobu" had his bike tuned over there and some work done. Jerry Cooper builds NLR's motors ect.....I was overall impressed with the shop and reputation and experience with high performance motorcycles. I'm sure there are tons of great builders that are capable of putting together high HP bikes but he was the closest and I felt good about spending my money with Jerry

I think thats where im taking mine next year to get freshend up.

well I don't know how its gonna run yet because its not together yet...but i have faith it will be A+. You really need to go by the place, it looks like a surgery hospital for street bikes....top notch everything and really clean, full machine shop, powder coating, indoor climate controlled dyno, ect......plus Richard Gadson is their new ProMod rider.

Patterson · « **Reply #95 on:** February 20, 2009, 04:49:42 PM »

Where in Ga is it?

ACE23 · « **Reply #96 on:** February 20, 2009, 04:58:09 PM »

Quote from: Patterson on February 20, 2009, 04:49:42 PM

Where in Ga is it?

its over in Macon....if your close it would be worth you time to drive over and check it out

bobu · « **Reply #97 on:** February 20, 2009, 07:25:01 PM »

Hey Patterson
I tried 2 sponsors here before I found Cooper, Its about a 7 hr trip for me & I dont care who's closer or cheaper.

Patterson · « **Reply #98 on:** February 20, 2009, 10:52:50 PM »

Quote from: ACE23 on February 20, 2009, 04:58:09 PM

Quote from: Patterson on February 20, 2009, 04:49:42 PM
Where in Ga is it?
its over in Macon....if your close it would be worth you time to drive over and check it out

its about 2 hours from here. i go down there every once it a while, might check him out one day

TrickTom1 · « **Reply #99 on:** February 21, 2009, 09:54:27 AM »

I've heard nothing but good about Cooper

News:

Author Topic: RCC SUPER ULTRA STREET BIKE (Read 200024 times) Tweet