Total project bike from the ground up. Engine should be ready within 3 weeks, turbo system should be arriving within a week, still deciding on what to do with the paint, I'm thinking of "07 busa blue, dodge viper red, gloss black". Here is the parts list. This is a real "STREET BIKE" ride it all day on the street or take it to the track. If later down the road I wanna toss the 240 tire I can slap a stock size wheel and tire on it and throw in some spacers. This is not a trailer queen
Bike Mods
*Puig dark double bubble windscreen
*ASV unbreakable levers
*speedohealer
*Driven grips and bar ends
*Driven sprockets
*Galfer front rotors
*Galfer rear rotor
*Galfer braided front lines, EBC HHH pads
*240 wheel kit powder coated black "Pirelli Diablo rubber"
*8 over Tracdynamic underbraced arm with air tank powder coated black 3 inch adjustability
*Vortex black rearsets
*HID low 8K, high 4K
*Vortex gas cap and base in black
*6 over catayst street tail
*Tiger tail powder coated black
*Woodcraft stator cover
*ELKA rear shock
*Painted body and inner panels "color yet to be decided" "whatever color it turn out its getting a gloss black kanji on the sides
*Triple tree powder coated black
*Fork caps powder coated black
*Stem nut powder coated black
*kickstand powder coated black
*Tank pad powder coated black
*Lower tripple tree powder coated black
*Gauge plate powder coated black
*Blue gauges LED backing
*clear alternative smoked tail light
*smoked turn signals
*Frame powder coated black
*Forks cut down 1 inch, painted high gloss black
*chain guard powder coated black
*DRZ2 chain
*tiger racing gauge pods powder coated black
*Black anodize fairing bolts
Turbo
*RCC "SUPER" Ultra kit---GT4094R twin scroll
Motor
*Crower Rods 280K bolts
*JE Turbo Pistons
*oil block offs
*high volume oil gear
*billet 2 inch pan
*billet cam chain adjuster
*windage tray
*APE shift shafts
*APE 65lb valve springs
*APE roller chain conversion
*APE main studs
*1mm over stainless steel exhaust valves
*MTC Billet slider clutch basket
*MTC inner billet hub
*MTC 2 stage lockup
*Billet clutch cover
*New bearings throughout motor
*RCC 13mm head studs
*.080 base spacer
Tranny
*R&D transmission with heavy duty output shaft, nitrous drum backcut, circlip mod, 1st-6th backcut
Electronics
*NLR AMS-1000
*Innovate motorsports LM-1 wideband
*Boost by smith ECU reflash 12K limiter, 3 degrees timing pulled, limiter removed ect....
*Boost by smith shift light
*Dual digital A/F--Boost
*Dual digital oil temp and oil pressure
*Digital air intake temp
*Digital fuel pressure