BTW, when testing your secondaries, you may have to rev it some to get the injectors to fire off, the Microtech map works off of RPMs vs. Boost pressure so you can add 20psi to the map sensor but if the Microtech is not seeing any rpms(or maybe like 1250 at idle) it might not signal the injectors. You probably won't have any positive numbers in the Microtech map till like 4000 rpms so..... I would bring the rpms up to about 4-5k and hold em there, then give the 3 bar map a shot of air and it should bog the motor down big time, if it does, you're all good, if no bog or any noticeable difference in running, then the secs. still aren't working.