Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Cycle-tek air shifters....  (Read 5413 times)

Offline ZX-ALAN

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 6843
Cycle-tek air shifters....
« on: January 27, 2009, 07:06:08 PM »
Kick ass..... Easiest bike mod I have installed yet...The pre-made harness is very easy to install and plug n play.  I have made about 10 passes so far and the shifter hasn't missed a shift yet. The kill box didn't even need adjusting. For anyone needing a quality air shifter, I HIGHLY recommend Cycle-Tek...


My make shift bracket


Trying to keep my trunk space and factory tool kit installed on the factory hooks. Lots of junk tucked in there.  PCIII, SPeedo-healer, shift light box, kill box, CO2 tank.



All buttoned up and done, plenty of room for my tire repair kit, small can of plexus/towel, cell phone, ball cap, sunglasses and a pack of rubbers  8)....



Logged
2000 turbo-busa, RCC Stg 2 intercooled, 319hp@14lbs(pump gas), 435hp@28lbs
Texas Mile March 09, 225.906 mph, 8.82@168.43 w/1.63 60'-14lbs

2013 BMW S1000rr, Brocks CT exh, 185hp

Offline Fastbusa-1

  • Rider
  • ***
  • Posts: 129
Re: Cycle-tek air shifters....
« Reply #1 on: January 27, 2009, 07:46:28 PM »
I agree, best mod for the money, always there to help if you have any problems...
Logged

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4319
  • Gender: Male
Re: Cycle-tek air shifters....
« Reply #2 on: January 28, 2009, 12:21:12 AM »
Quote from: Fastbusa-1 on January 27, 2009, 07:46:28 PM
I agree, best mod for the money, always there to help if you have any problems...

+1  :thumb:
Logged
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013

Offline EXTREMEFUN1300

  • Cycle Tek
  • Site Supporter
  • Mad Post Whore
  • ****
  • Posts: 3518
    • www.cycle-tek.com
Re: Cycle-tek air shifters....
« Reply #3 on: January 29, 2009, 07:16:20 AM »
Hey Thanks guys!

Alan, thanks for posting the pics, nice job on the install   :thumb:
Logged

Offline Lumpasaurus

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Re: Cycle-tek air shifters....
« Reply #4 on: January 29, 2009, 04:13:42 PM »
Alan, glad to see things going your way for once.  After reading like a million posts on your turbo and electrical problems, you deserve no more bullshit with your bikes. 
Logged

Offline ZX-ALAN

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 6843
Re: Cycle-tek air shifters....
« Reply #5 on: February 23, 2009, 11:03:14 AM »
Quote from: lumpasaurus on January 29, 2009, 04:13:42 PM
Alan, glad to see things going your way for once.  After reading like a million posts on your turbo and electrical problems, you deserve no more bullshit with your bikes. 


Yeah no shit huh.....  Well the busa is finally coming around also.... Matter in fact, I am installing a Cycle-Tek air shifter on it right now also since I liked my 1000's shifter so much..... Stay tuned for pics...
Logged
2000 turbo-busa, RCC Stg 2 intercooled, 319hp@14lbs(pump gas), 435hp@28lbs
Texas Mile March 09, 225.906 mph, 8.82@168.43 w/1.63 60'-14lbs

2013 BMW S1000rr, Brocks CT exh, 185hp

Offline EXTREMEFUN1300

  • Cycle Tek
  • Site Supporter
  • Mad Post Whore
  • ****
  • Posts: 3518
    • www.cycle-tek.com
Re: Cycle-tek air shifters....
« Reply #6 on: February 23, 2009, 12:03:55 PM »
 :woot:
Logged

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4319
  • Gender: Male
Re: Cycle-tek air shifters....
« Reply #7 on: February 23, 2009, 12:41:38 PM »
 :thumb:
Logged
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013

Offline ZX-ALAN

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 6843
Re: Cycle-tek air shifters....Updated w/ pics
« Reply #8 on: February 25, 2009, 06:22:24 PM »
Install complete on the busa....




Lowered 1.25" normal ride height.




Lowered 3"





It was tight, but its all in there.....I haven't road tested it yet but its working great on the stand.... :thumb:

Such a great product...
« Last Edit: February 25, 2009, 06:27:57 PM by ZX-ALAN »
Logged
2000 turbo-busa, RCC Stg 2 intercooled, 319hp@14lbs(pump gas), 435hp@28lbs
Texas Mile March 09, 225.906 mph, 8.82@168.43 w/1.63 60'-14lbs

2013 BMW S1000rr, Brocks CT exh, 185hp

Offline EXTREMEFUN1300

  • Cycle Tek
  • Site Supporter
  • Mad Post Whore
  • ****
  • Posts: 3518
    • www.cycle-tek.com
Re: Cycle-tek air shifters....
« Reply #9 on: February 25, 2009, 06:26:10 PM »
Dude, you don't waste anytime!   :)

Well done  :thumb:
Logged

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4319
  • Gender: Male
Re: Cycle-tek air shifters....
« Reply #10 on: February 26, 2009, 02:05:17 AM »
Perfect job Alan  :thumb:

Damn that I cant use the CO2 system. It looks great.
No filling station out here in Germany  :(

Mike
Logged
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013

Offline ZX-ALAN

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 6843
Re: Cycle-tek air shifters....
« Reply #11 on: February 26, 2009, 06:59:49 AM »
Quote from: Mike-Nightrider on February 26, 2009, 02:05:17 AM
Perfect job Alan  :thumb:

Damn that I cant use the CO2 system. It looks great.
No filling station out here in Germany  :(

Mike


Can't you get nitrous over there?  Get Matt to set you up with a Nitrous bottle setup with the fittings, hoses etc to replace the Co2 bottle with.... Thats what I was going to do if I couldn't find anywhere to mount the Co2 bottle....(put the nitrous bottle in the arm)..... the jury is still out if my tire is going to hit the bottle or not when the bike is slammed but.....I haven't rode it slammed in 3 years so.....
Logged
2000 turbo-busa, RCC Stg 2 intercooled, 319hp@14lbs(pump gas), 435hp@28lbs
Texas Mile March 09, 225.906 mph, 8.82@168.43 w/1.63 60'-14lbs

2013 BMW S1000rr, Brocks CT exh, 185hp

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4319
  • Gender: Male
Re: Cycle-tek air shifters....
« Reply #12 on: February 26, 2009, 07:16:19 AM »
Yup, Nitrous would be possible to get at the racetracs here.
But Ive installed an air bottle for the shifter system.
It works well, too.
And a little "work out" before racing is good for your helth and cheaper  :lol:  :wink:
Logged
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013
Pages: [1]   Go Up
« previous next »