Same quanity as Gen-1 ???? Harold.
Okay,,, here's what you do after you have placed your oil filter on. Hopefully you have wrapped your header pipes with aluminum foil so you don't get oil all over them when you removed it! New filter, hand tighten, extra quarter turn with wrench. Fill through a funnel, pour in three quarts. Cap. Start and run for two or three minutes,, or enough to circulate and fill your oil filter. If you slightly primed your filter, the run to circulate will be less. Turn the key off. Let the bike and oil sit for a minute. With the bike on its own side stand (both wheels on the ground), assume a seated position on the right side so to view the clutch cover 'site window'. From that seated position (or squat - depending on your dexterity) grab the right handle bar and pull the bike toward you until you feel it is level. View the 'site window' and then gauge how much more you should fill until you have reached the full line. Cap off and you are set. Re-check after a good ride.
3100 ml = 3.27573345 US quarts
I know that maybe more than you asked for,, I hope it helps a bit, Harold.