1st 1/4 mile pass w/turbo

[XXORCIST]

well we usually run 1/8 mile but had a chance @ pmra this sat and ran a 8.5- and best mph of the day was 165-... not bad,stg1 @ 280hp and 255lbs......diggin the turbo thanggggg    

[fatnslow]

nice pass, welcome to the wounderful world of turbos 

[jimmygsxr]

Nice pass

[XXORCIST]

thanks fellas!

[fatnslow]

what was your 60 and 1/8 mile? if you dont mind telling   

[XXORCIST]

no prob. im not some grudge racer or anything... 1/8 5.57(which my best has been a 5.54) @ 134 same mph in the 1/8... 60 ft avg 1.47.. best 1.41 but not since turbo.. 1.45 alot but that pass was 1.47 ... if that helps. gearing 17/42... set @ 65 inch.

[fatnslow]

damn thats great mph, you hauling the mail for sure, im kinda woundering now whats it gonna do when you turn the boost up 

[XXORCIST]

well its bone stock mtr. no plate,with a blue spring. s2000's thats as far as im willing to try right now... so 9.50's ....is what it is...

[fatnslow]

i understand totally, my motor is bone stock to, so cant do much more than i am now to. 8.50,s is moving though, wish i was close to that, keep up the great work 

[XXORCIST]

thanks so much and g/l to you as well !

[fatnslow]

thanks 

[gnd111]

Nice.  How much boost and what kind of controller for it?   

[XXORCIST]

Nice.  How much boost and what kind of controller for it?   

small blue(8.75 i think) no controller..just spring.

[gnd111]

Nice - that is 8.7lbs and probably a bit more than 9lbs with creep.  Tuned to what AFR and what ger combo?   (i am trying to get mine straight)...

[XXORCIST]

17/42. may try 18/45 18/46 next. cant remember what the a/f was . 

[Turbo G]

Awesome numbers. Are you rinning a full exhaust? whats your clutch setup? Stock or lockup?

[XXORCIST]

no have dumps, and clutch is oem with welded mod and 6 ape heavy springs... thats it! i tried the stock 2 pc but was real hard to control launch...

[gnd111]

no have dumps, and clutch is oem with welded mod and 6 ape heavy springs...

That is what i am going to try next and 17/43 gears...

[fatnslow]

no have dumps, and clutch is oem with welded mod and 6 ape heavy springs...

That is what i am going to try next and 17/43 gears...

thats the gear i run 17/43, im gonna end up running 18/45 or 47 soon

[ZX-ALAN]

DAMN DUDE...... I am VERY impressed....You are riding the fuck out of that bike........You trying to catch Eddie?  LOL you're getting close..


BTW XXORCIST is NOT a small guy......I would guess 220-230lbs... so to be running 8.50s on a stg 1 kit, stock motor, no lock up, no boost controller etc is insane.....


 

[XXORCIST]

lol thanks alan..... no.... eddie is going to fly! trust me...lol but yep i like food..255lb in shorts baby! .. thanks for the compliments... wished i had yo powerrrrr

[DXB]

Great run, that on stock tires and swing arm?

[XXORCIST]

lolol...no sets at 65" and shinko u soft...

[DXB]

sorry i dont understand what you have put, in laymans terms pls!

[XXORCIST]

sorry i dont understand what you have put, in laymans terms pls!

no problem. its stretched about 6-7 inches. and i run a shinko u soft 190/50/17 rear tire

[DXB]

sorry i dont understand what you have put, in laymans terms pls!

no problem. its stretched about 6-7 inches. and i run a shinko u soft 190/50/17 rear tire

So an aftermarket swing arm which is 6 inches longer? does that affect the road handling?

The tire is for drag only or road legal also?

What times could your bike post with stock tire and arm?

[XXORCIST]

sorry i dont understand what you have put, in laymans terms pls!

no problem. its stretched about 6-7 inches. and i run a shinko u soft 190/50/17 rear tire

So an aftermarket swing arm which is 6 inches longer? does that affect the road handling?

The tire is for drag only or road legal also? yep... on the arm.. tire is street legal...handles like a limo... i wouldnt recomend taking corners real hard! lol

What times could your bike post with stock tire and arm?

[gnd111]

so to be running 8.50s on a stg 1 kit, stock motor, no lock up, no boost controller etc is insane.....

280rwhp no matter what stage will do that for you if you can ride it...

[ZX-ALAN]

so to be running 8.50s on a stg 1 kit, stock motor, no lock up, no boost controller etc is insane.....

280rwhp no matter what stage will do that for you if you can ride it...

Yeah in theory it definetly should....yet most people at the strip with stg 1s(and 2s for that matter) and normal street bike setups struggle to go 8.90s....

He is going way faster then most of the average street turbo guys with a lot less stuff on the bike.  Just getting it done with skill.

[BADBUSA4U]

so to be running 8.50s on a stg 1 kit, stock motor, no lock up, no boost controller etc is insane.....

280rwhp no matter what stage will do that for you if you can ride it...

Yeah in theory it definetly should....yet most people at the strip with stg 1s(and 2s for that matter) and normal street bike setups struggle to go 8.90s....

He is going way faster then most of the average street turbo guys with a lot less stuff on the bike.  Just getting it done with skill.

he can ride. launches hard. and when it wheelies............, lets just say hes not getting out of the throttle

[fatnslow]

so to be running 8.50s on a stg 1 kit, stock motor, no lock up, no boost controller etc is insane.....

280rwhp no matter what stage will do that for you if you can ride it...

Yeah in theory it definetly should....yet most people at the strip with stg 1s(and 2s for that matter) and normal street bike setups struggle to go 8.90s....

He is going way faster then most of the average street turbo guys with a lot less stuff on the bike.  Just getting it done with skill.

[DXB]

On stage 1 kit, say 280bhp? how will boost controller help? enable better HP throughout the rev-range? also more HP at the top ebd or not?

[Addict2n20]

thats flying