Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: 03 gsxr1000 loud knockin  (Read 5562 times)

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
03 gsxr1000 loud knockin
« on: April 18, 2009, 11:07:08 PM »
bike ran hot.    now has knocking noise   
   looking in the throttle bodies i can see a green fluid on the valves   

  smells like gas
  user only has run 93 oc    never ran green antifreeze only orange.


webcams
port
1078cc
any ideas on knocking or the green fluid?

Logged

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: 03 gsxr1000 loud knockin
« Reply #1 on: April 19, 2009, 08:36:55 AM »
 i"m not sure why its not the same color  but it sounds like coolant/anit freeze .time for a new head gasket
and maybe new new rod,crank and bearings

 the knocking is probably a rod.
« Last Edit: April 19, 2009, 08:42:33 AM by dave3.4 »
Logged

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
Re: 03 gsxr1000 loud knockin
« Reply #2 on: April 19, 2009, 08:41:34 AM »
we drained the oil last night, it was full of little copper bits... going to pul the motor this morning
Logged

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
Re: 03 gsxr1000 loud knockin
« Reply #3 on: April 19, 2009, 08:42:09 AM »
how to check if the head is warped?
Logged

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: 03 gsxr1000 loud knockin
« Reply #4 on: April 19, 2009, 08:44:32 AM »
send it off to a machine shop :thumb:
Logged

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
Re: 03 gsxr1000 loud knockin
« Reply #5 on: April 19, 2009, 05:12:41 PM »
crank journles looked good exept one, but it was just scuffed?...
   one of the bearing showed a slice of copper, but not enough to explain all the bits that was in the oil.

havn't gotten into the head yet, prob tommorow


has webcams
 adjustable sprockets
je pistons
carlio rods
Logged

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: 03 gsxr1000 loud knockin
« Reply #6 on: April 19, 2009, 07:35:23 PM »
the number three journal??

 post pics :thumb:
Logged

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
Re: 03 gsxr1000 loud knockin
« Reply #7 on: April 19, 2009, 09:01:39 PM »
its where the #3 rod connects   
    is this common?


cant get cam to take a decent pic!!! damn crappy cameras
Logged

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: 03 gsxr1000 loud knockin
« Reply #8 on: April 19, 2009, 09:14:31 PM »
I have had a few 1ks and the number three journal is always the one that shreds the bearings .

When you rebuild it put a high flow oil pump in it
Logged

Offline magus

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1440
  • Gender: Male
  • Zenaku Racing
Re: 03 gsxr1000 loud knockin
« Reply #9 on: April 19, 2009, 09:35:36 PM »
is that just the high flow gear like on the busa?

 Thanks for all your help Dave!   This is the deepest i have ever been into any motor.   have only replaced my busa tranny before

where do I get new bearings from? how do I know which ones to order?
Logged

Offline 13

  • Post Whore
  • ****
  • Posts: 571
  • Gender: Male
  • crazy
Re: 03 gsxr1000 loud knockin
« Reply #10 on: June 19, 2009, 08:28:47 AM »
You should never see copper from a bearing, i just tore down another 03 motor , with the same problem.
Copper chips in pan, it had 2 rod bearings bad.
Logged
Self Appointed Smart Ass
Pages: [1]   Go Up
« previous next »