Author Topic: My Turbo build (Read 32119 times) Tweet

atticdog · « **on:** May 09, 2009, 06:41:30 PM »

Joey (1badassbusa) and I have been building my bike in his shop Ruthless Performance Motorsports.
I started out with my 2001 Busa with a BDE Gen3 exhaust tuned by DaveO

Taking it apart

atticdog · « **Reply #1 on:** May 09, 2009, 06:42:35 PM »

atticdog · « **Reply #2 on:** May 09, 2009, 06:43:42 PM »

we took the oil pan and pickup off so it will sit flat on the bench
new gaskets, adjustable cam sprockets,.080 spacer and Hi volume oil gear laying on next bench to be installed

atticdog · « **Reply #3 on:** May 09, 2009, 06:46:12 PM »

Here is Joey always in a good mood when building a busa

atticdog · « **Reply #4 on:** May 09, 2009, 06:49:18 PM »

spacer and 10mm studs installed

atticdog · « **Reply #5 on:** May 09, 2009, 06:51:01 PM »

then we pressed the cam sprockets off and pressed on Ape ADJ Cam Sprockets

Degreed the cams

atticdog · « **Reply #6 on:** May 09, 2009, 06:52:48 PM »

also welded in a 10an 90 degree fitting into the oil pan for the turbo return line

motor back in

atticdog · « **Reply #7 on:** May 09, 2009, 06:54:45 PM »

started test fitting turbo parts

Thanks to Howard (over200) I got the idea of using a gen2 radiator

atticdog · « **Reply #8 on:** May 09, 2009, 06:56:46 PM »

making the up pipe

Joey ported the wastegate

atticdog · « **Reply #9 on:** May 09, 2009, 07:00:44 PM »

Next I started making the plenum straps

next I installed hi volume oil gear and heavy clutch springs (forgot to take a pic)

19 tooth front sprocket Thanks John (speedking)

good spot for fuel pressure regulator

fuel pump mounted

atticdog · « **Reply #10 on:** May 09, 2009, 07:03:03 PM »

more test fitting of up pipe and radiator

from the other side

bigbill1441 · « **Reply #11 on:** May 09, 2009, 08:00:46 PM »

coming out nice

Coryonbusa · « **Reply #12 on:** May 09, 2009, 08:06:15 PM »

Looks awesome! What did you coat you header and dumps with?

atticdog · « **Reply #13 on:** May 09, 2009, 08:57:30 PM »

Quote from: Coryonbusa on May 09, 2009, 08:06:15 PM

Looks awesome! What did you coat you header and dumps with?

sent them to calico coating for cool black thermal coating

1low04Busa · « **Reply #14 on:** May 09, 2009, 10:37:22 PM »

Looking good

atticdog · « **Reply #15 on:** May 10, 2009, 06:35:20 PM »

Thanks for the compliments

BATTMAN · « **Reply #16 on:** May 12, 2009, 09:42:20 PM »

Looks real good. I see that you didnt really do any internal mods but you have secondary injectors. I take it that you are keeping the stage 2 turbo below 10 lbs of boost.

atticdog · « **Reply #17 on:** May 12, 2009, 09:49:15 PM »

BATTMAN i did add an .080 spacer to lower compression and ape studs
so I should be good for abit over 300 hp with stock pistons and rods
I have GT2860rs dbb turbo
also water/air intercooling

BATTMAN · « **Reply #18 on:** May 12, 2009, 10:10:23 PM »

How much boost

atticdog · « **Reply #19 on:** May 12, 2009, 10:16:49 PM »

ill stay under 15psi
its my street bike maybe goto the track a few times a year

BATTMAN · « **Reply #20 on:** May 12, 2009, 10:42:48 PM »

Are you positive the rods will hold at 15 lbs?

atticdog · « **Reply #21 on:** May 12, 2009, 10:50:19 PM »

15 will probably be 320hp with my turbo
its not as big as a rcc stage 2 turbo

HOS · « **Reply #22 on:** May 13, 2009, 04:57:45 AM »

Looks brilliant ! !

When are you hoping to have it on the road ?

Thanks for the photos

horndog · « **Reply #23 on:** May 13, 2009, 07:42:28 AM »

Nice work Attic... Most impressed

Mike-Nightrider · « **Reply #24 on:** May 13, 2009, 11:29:58 AM »

Very good job mate

Mike

News:

Author Topic: My Turbo build (Read 32119 times) Tweet