Haybusa Parts and Service Member Support
« previous next »
Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: mcxpress / gatlin shootout tank/ pmfr beadlock wheel /catalyst tail  (Read 84355 times)

Offline THE O

  • Rider
  • ***
  • Posts: 39
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #75 on: February 27, 2010, 01:29:40 AM »
NO IT NOT RUNNING MY BUSA IS FLYING :hys:
Logged
7.87@  175.mph (( all motor))

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #76 on: February 27, 2010, 05:42:04 AM »
Quote from: Grumpy 69 on February 26, 2010, 06:25:29 PM
Quote from: roadraceking on February 23, 2010, 05:37:34 PM
Quote from: THE O on February 19, 2010, 10:32:46 PM
GRUMPY 69 WERE ARE YOU GOING WITH 2 GALLONS OF GAS ?  :?: :hys:

Hey Odell,nobody in Cincinnati who owns a busa(me included) rides farther than to go to chrome night at shake n' bake lube or whatever,he'll have plenty of gas LOL


Odell is THE O ?

give that HD  a rest :sprz: and get to work on your :yes: turbo busa  :whaa: it's too cool to leave sit........ :hm:

 :moped: gonna get me  2 gallons of gas and top the tank off as soon as it starts to warm up here... this cold weather sux....... :whaa: :whaa:


errrrrr, my bad :crzy: , that  HD stuff was meant for road race king......I wasn't aware that Odell is THE O...sorry :hellno: if u took it that way....."O"  :duh:
Logged
not enough bullets to get em all.......but I can try......

Offline THE O

  • Rider
  • ***
  • Posts: 39
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #77 on: February 27, 2010, 01:26:55 PM »
WELL GRUMPY  :twisted:THE O IS STILL ALIVE. WENT YOU SAID HD  :moped: I THOUGHT YOU MENT Hi DEAF LIKE  HUM TV :hys: NOT HARLEY DAVIDSON :hys: :hys: :hys:
« Last Edit: February 27, 2010, 01:29:38 PM by THE O »
Logged
7.87@  175.mph (( all motor))

Offline THEMOTORHEAD

  • Site Donor
  • Post Master
  • *
  • Posts: 1581
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #78 on: February 27, 2010, 01:54:10 PM »
 :hys: :hys: :hys: :hys: :hys: :hys: :hys: :hys:
Logged

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #79 on: February 27, 2010, 02:31:34 PM »
Quote from: THE O on February 27, 2010, 01:26:55 PM
WELL GRUMPY  :twisted:THE O IS STILL ALIVE. WENT YOU SAID HD  :moped: I THOUGHT YOU MENT Hi DEAF LIKE  HUM TV :hys: NOT HARLEY DAVIDSON :hys: :hys: :hys:

 :ll: :ll: :rfl: :rfl:
Logged
not enough bullets to get em all.......but I can try......

Offline roadraceking

  • Rider
  • ***
  • Posts: 21
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #80 on: February 27, 2010, 05:16:26 PM »
Nope cams in harley(cause i like to ride 2-300 miles sometimes) & finish up my 1000rr roadrace bike are my priorities,i'll mess w/the turbo after that.
« Last Edit: February 27, 2010, 05:52:44 PM by roadraceking »
Logged

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #81 on: February 28, 2010, 09:57:10 AM »
Quote from: roadraceking on February 27, 2010, 05:16:26 PM
Nope cams in harley(cause i like to ride 2-300 miles sometimes) & finish up my 1000rr roadrace bike are my priorities,i'll mess w/the turbo after that.



  :sprz: CAMS....cams aren't gonna help the HD  :duh: .......maybe 85 % nitro  :roll:........no way are you talking  2 or 300 miles gotta be a typo, too many zero's......I'm sure you meant ........cause I like to ride 2 or 3 miles parade lap  :yes:......
 :rfl: :rfl: :rfl:
Logged
not enough bullets to get em all.......but I can try......

Offline GsxHyper

  • Rider
  • ***
  • Posts: 414
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #82 on: February 28, 2010, 10:14:32 AM »
Does it still have the cut oil pan on it?
Logged
B-RAD
2000 McXpress Turbo
8.642@167.47

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #83 on: February 28, 2010, 11:12:58 AM »
Quote from: GsxHyper on February 28, 2010, 10:14:32 AM
Does it still have the cut oil pan on it?
 

 no.......post a pic of your pan if possible maybe mines diff.


Logged
not enough bullets to get em all.......but I can try......

Offline roadraceking

  • Rider
  • ***
  • Posts: 21
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #84 on: February 28, 2010, 01:53:13 PM »
 

  :sprz: CAMS....cams aren't gonna help the HD  :duh: .......maybe 85 % nitro  :roll:........no way are you talking  2 or 300 miles gotta be a typo, too many zero's......I'm sure you meant ........cause I like to ride 2 or 3 miles parade lap  :yes:......
 :rfl: :rfl: :rfl:
[/quote]

I rode that Harley more the 1st day i had it than you rode that busa in all you chicken wing trips last year put together! :wink:
Logged

Offline THE O

  • Rider
  • ***
  • Posts: 39
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #85 on: February 28, 2010, 02:01:02 PM »
 :hys: :crzy: :USA: :moped: :kickass: :hys: :hys:
Logged
7.87@  175.mph (( all motor))

Offline THE O

  • Rider
  • ***
  • Posts: 39
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #86 on: February 28, 2010, 02:06:43 PM »
     
http://www.liveleak.com/view?i=4fe_1267045831
 
Dam check this out O
Logged
7.87@  175.mph (( all motor))

Offline roadraceking

  • Rider
  • ***
  • Posts: 21
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #87 on: February 28, 2010, 04:33:43 PM »
Good save!
Logged

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #88 on: March 06, 2010, 10:56:08 AM »



 :bmb:   received my shiny new 0" to 4" lowering links this morning  :smokin:
Logged
not enough bullets to get em all.......but I can try......

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #89 on: March 06, 2010, 11:07:54 AM »
those are nice , who makes them
Logged
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #90 on: March 06, 2010, 01:34:48 PM »
Quote from: nickelcityracing on March 06, 2010, 11:07:54 AM
those are nice , who makes them

 
  :thnks: maker unknown but Tucker Rockey sells them , 0" to 4" stainless steel according to the ad.....had soupy's  imo these are better lookin.... :yes:
Logged
not enough bullets to get em all.......but I can try......

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #91 on: March 06, 2010, 01:49:41 PM »
Quote from: Grumpy 69 on March 06, 2010, 01:34:48 PM
Quote from: nickelcityracing on March 06, 2010, 11:07:54 AM
those are nice , who makes them

 
  :thnks: maker unknown but Tucker Rockey sells them , 0" to 4" stainless steel according to the ad.....had soupy's  imo these are better lookin.... :yes:

I replaced my soupy's  links because of rust .....not bashing soupy's ... :( these stainless steel tucker rocky links are lifetime guaranteed not to rust and like soupy's are 1/2-20 thread....... :bgd:  the best part is I found a guy selling em on E bay for $63 delivered....  retail list is $110 plus ship   :woot:
Logged
not enough bullets to get em all.......but I can try......

Offline GsxHyper

  • Rider
  • ***
  • Posts: 414
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #92 on: March 21, 2010, 08:09:33 PM »
Quote from: Grumpy 69 on February 28, 2010, 11:12:58 AM
Quote from: GsxHyper on February 28, 2010, 10:14:32 AM
Does it still have the cut oil pan on it?
 

 no.......post a pic of your pan if possible maybe mines diff.



if i recall correct,after i cut the pan,i put the plug on the front of the pan. The stock pan is v-shaped at the bottom.It's been a long time since I put that bike together.
Logged
B-RAD
2000 McXpress Turbo
8.642@167.47

Offline GsxHyper

  • Rider
  • ***
  • Posts: 414
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #93 on: March 21, 2010, 08:20:30 PM »






Logged
B-RAD
2000 McXpress Turbo
8.642@167.47

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #94 on: March 22, 2010, 08:57:02 AM »
hey Brad...yes, same pan.   :crzy: 
Logged
not enough bullets to get em all.......but I can try......

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #95 on: April 11, 2010, 07:35:29 AM »






arrgghhhhh, now the secondaries are not working... :whaa:
« Last Edit: April 11, 2010, 07:40:41 AM by Grumpy 69 »
Logged
not enough bullets to get em all.......but I can try......

Offline dadofthree

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1719
  • Gender: Male
Re: lurking newbie old guy mcxpress
« Reply #96 on: April 11, 2010, 07:39:06 AM »
Quote from: Grumpy 69 on May 26, 2009, 06:47:54 PM
thanks..... I'm looking to make a dump pipe for it soon  :)

Dump pipes are great  :thumb:
Logged

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #97 on: April 13, 2010, 12:59:57 PM »
finally figured out the silver box had a wiring problem :stupid:........ repaired and it's boosting again   :trb: :ll:
new catalyst tail is reinforced and mounted..... :vllgh:



 haven't started on the dump pipe yet.......... :hm:   I've got plenty of time........ :hys:
Logged
not enough bullets to get em all.......but I can try......

Offline piratediverjefff

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 8540
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #98 on: April 13, 2010, 06:53:57 PM »
Quote from: Grumpy 69 on April 13, 2010, 12:59:57 PM
finally figured out the silver box had a wiring problem :stupid:........ repaired and it's boosting again   :trb: :ll:
new catalyst tail is reinforced and mounted..... :vllgh:



 haven't started on the dump pipe yet.......... :hm:   I've got plenty of time........ :hys:

Lookin' good Grumpy. :thumb:
Logged
Build a man a fire and he'll be warm for a day,light a man on fire and he'll be warm for the rest of his life.

Offline Grumpy 69

  • Rider
  • ***
  • Posts: 343
  • Gender: Male
Re: old guy mcxpress new gatlin shootout tank/ pmfr beadlock wheel /catalyst tail
« Reply #99 on: April 13, 2010, 07:04:00 PM »
Quote from: piratediverjefff on April 13, 2010, 06:53:57 PM
Quote from: Grumpy 69 on April 13, 2010, 12:59:57 PM
finally figured out the silver box had a wiring problem :stupid:........ repaired and it's boosting again   :trb: :ll:
new catalyst tail is reinforced and mounted..... :vllgh:



 haven't started on the dump pipe yet.......... :hm:   I've got plenty of time........ :hys:

Lookin' good Grumpy. :thumb:


 :thnks:  it's gettin there.... :duh:
Logged
not enough bullets to get em all.......but I can try......
Pages: 1 2 3 [4] 5 6   Go Up
« previous next »