Haybusa Parts and Service Member Support

Author Topic: Gen 2 ECU Flashing  (Read 156555 times)

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Gen 2 ECU Flashing
« on: June 30, 2009, 08:52:12 PM »
Thank you Petrik for your ECU Editor 2.0 Software, can't wait to try this out.  Anyone wanna loan me a 08 busa for the summer?

Still pending testing, bought 2 ecu's, waiting for the 1st one to show up to see if it flashes, then off to a buddies house an hour away to try it on his bike.

Official Site Supporter

www.boostbysmith.com

Offline SKILLZ

  • Rider
  • ***
  • Posts: 257
  • Gender: Male
  • Where am I?
Re: Gen 2 ECU Flashing
« Reply #1 on: June 30, 2009, 10:41:17 PM »
Ok pm me price on the unit, im ready to buy.  :thumb:
8.95 @152.40 on 06 stock bore N/A

08' 8.75 @159.18 stock bore N/A  @1900" DA

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #2 on: June 30, 2009, 11:43:18 PM »
Gotta test it first ;)
Official Site Supporter

www.boostbysmith.com

Offline Jean-Mi

  • Apprentice Post Whore
  • **
  • Posts: 14
Re: Gen 2 ECU Flashing
« Reply #3 on: July 01, 2009, 01:17:27 AM »
I'm the second on the list...keep us informed...Thx

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: Gen 2 ECU Flashing
« Reply #4 on: July 01, 2009, 05:15:36 AM »
I'm the second on the list...keep us informed...Thx
..... :wink:
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline bikefrk

  • Post Whore
  • ****
  • Posts: 987
  • WestSide,Mi
Re: Gen 2 ECU Flashing
« Reply #5 on: July 01, 2009, 06:12:48 AM »
Thank you Petrik for your ECU Editor 2.0 Software, can't wait to try this out.  Anyone wanna loan me a 08 busa for the summer?

Still pending testing, bought 2 ecu's, waiting for the 1st one to show up to see if it flashes, then off to a buddies house an hour away to try it on his bike.




Do you need the bike for the whole summer, or would a week work for you?  8)

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #6 on: July 01, 2009, 06:58:23 AM »
well the whole summer sure would be a lot more fun LOL
Official Site Supporter

www.boostbysmith.com

Offline gjp1300

  • Post Whore
  • ****
  • Posts: 624
Re: Gen 2 ECU Flashing
« Reply #7 on: July 01, 2009, 11:34:52 AM »
What will be the new parameters for the ECU after you flash it?When will it be ready?I need to get ready for the top speed runs Aug.1st and 2nd in Maine at Lorane Air field,maybe I could test it for you.

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #8 on: July 01, 2009, 11:38:11 AM »
What will be the new parameters for the ECU after you flash it?When will it be ready?I need to get ready for the top speed runs Aug.1st and 2nd in Maine at Lorane Air field,maybe I could test it for you.

not sure what you mean new paramters after flashing.  Well i have hardware built, and hopefully i have a 08 ecu coming to me today to make sure it flashes.  Assuming it does ill be visiting a local buddy this week / weekend to make sure the gauge data works, then its ready to go, just gotta start slapping them together etc.

Official Site Supporter

www.boostbysmith.com

Offline bouncer

  • Rider
  • ***
  • Posts: 240
  • Gender: Male
Re: Gen 2 ECU Flashing
« Reply #9 on: July 01, 2009, 03:45:20 PM »
What will be the new parameters for the ECU after you flash it?When will it be ready?I need to get ready for the top speed runs Aug.1st and 2nd in Maine at Lorane Air field,maybe I could test it for you.

At Loring af base in Maine? How long of a strip are they giving? Jesus I live in maine and this is the first I've heard of it!?! it's about a 4 hour ride for me

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
Re: Gen 2 ECU Flashing
« Reply #10 on: July 01, 2009, 04:45:48 PM »
What will be the new parameters for the ECU after you flash it?When will it be ready?I need to get ready for the top speed runs Aug.1st and 2nd in Maine at Lorane Air field,maybe I could test it for you.

At Loring af base in Maine? How long of a strip are they giving? Jesus I live in maine and this is the first I've heard of it!?! it's about a 4 hour ride for me

i think its 1 mile and also 1.5 miles
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: Gen 2 ECU Flashing
« Reply #11 on: July 01, 2009, 07:14:51 PM »
sniff,sniff,do i smell progress...... :lol:
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #12 on: July 01, 2009, 07:37:57 PM »
CONFIRMED!!!  Gauge data is working (well what i have hooked up on the bench anyway)

Just flashed it in fast mode :)

YEEEEEE   FREAKING    HAW!!!!!!!!!!!!!!!!!!!!!  :thumb:
« Last Edit: July 02, 2009, 09:14:33 AM by smithabusa »
Official Site Supporter

www.boostbysmith.com

Offline Stocker64

  • Post Whore
  • ****
  • Posts: 888
  • Gender: Male
Re: Gen 2 ECU Flashing
« Reply #13 on: July 01, 2009, 07:40:29 PM »
CONFIRMED!!!  Gauge data is working (well what i have hooked up on the bench anyway)

Just flashed it in both normal and fast mode :)

YEEEEEE   FREAKING    HAW!!!!!!!!!!!!!!!!!!!!!  :thumb:
taaaaa daaaaaaa,exciting even though you don't own an 08 does'nt it greg........ :lol:
09 BUSA, PROBLEMCHILD II.... tuned with the factory ecu by ME!! thanks PETRIK, ridgeracer,and SMITHBUSA. ...  "FAMILY FIRST"...

Offline gjp1300

  • Post Whore
  • ****
  • Posts: 624
Re: Gen 2 ECU Flashing
« Reply #14 on: July 01, 2009, 08:42:35 PM »
not sure what you mean new paramters after flashing.  Well i have hardware built, and hopefully i have a 08 ecu coming to me today to make sure it flashes.  Assuming it does ill be visiting a local buddy this week / weekend to make sure the gauge data works, then its ready to go, just gotta start slapping them together etc.
                                 
                Sorry,let me clarify,I want to raise my revlimter to somewhere between 11600 to 12000 if possible,will this ECU flasher do that and if not what does it do,I read some other posts on ECU flashing here where they said they would be able to.Loring is supposed to be 1 to 1.5 miles,Aug 1st and 2nd, all hayabusa's,I have to confirm that,but last time I checked it was.

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #15 on: July 01, 2009, 08:47:30 PM »
currently it looks like the software is showing 12500 as the max limiter rpm you can select.
Official Site Supporter

www.boostbysmith.com

Offline gjp1300

  • Post Whore
  • ****
  • Posts: 624
Re: Gen 2 ECU Flashing
« Reply #16 on: July 02, 2009, 05:39:11 AM »
So does that mean I can select what RPM I want my revlimiter to be,from 11500 to 12500 or it is set at 12500 and thats it,sorry for all the questions,thanks.

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
Re: Gen 2 ECU Flashing
« Reply #17 on: July 02, 2009, 05:42:03 AM »
So does that mean I can select what RPM I want my revlimiter to be,from 11500 to 12500 or it is set at 12500 and thats it,sorry for all the questions,thanks.

you may be able to set it to 12500 but the motor may not last at 12500
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #18 on: July 02, 2009, 05:50:23 AM »
Its adjustable download the software and check it out ;)
Official Site Supporter

www.boostbysmith.com

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #19 on: July 02, 2009, 06:55:52 AM »
So to check things out you can download the ECU Editor 2.0 software (which may require updated net framework depending on your windows version), and if you actually want to connect a box to the software and flash you will want to download this driver.

ECU Editor 2.0 http://macmadigan.no-ip.com/ecueditor2.0/ecueditor_prerelease.htm
Net Framework (might be required) http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en
Driver from FTDIchip.com http://www.ftdichip.com/Drivers/CDM/CDM%202.04.16.exe
« Last Edit: July 02, 2009, 07:02:31 AM by smithabusa »
Official Site Supporter

www.boostbysmith.com

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #20 on: July 02, 2009, 07:33:45 PM »
Thanks to Rick at Rick's Custom Cycle in Garden City, MI who let me install this on his 08 busa and make sure it worked, and it did :)

A few pics, install was cake, take a paper clip and push the white dummy plugs out of pins 25 and 28 out from the front of the connector through the back.  Then just insert the 2 pins, the green wire i had was 22 gauge (sorty flimsy) and i had to use a small screw driver to push it all the way in, the 20 gauge brown wire i inserted with just fingers.  no need to remove the back cap or anything, just insert until it clicks, easy cheesy!

We removed the battery to get the ecu connector up further, and pulled the barometric pressure sensor off its little base bracket so i could get at the yosh and sds.  I would say maybe 5 minutes if that to wire in the tiny 2 wire harness.  We unlocked the yellow lock in the yosh plug, to insert my green and brown wires into proper locations, then put the lock back on.

To start with we flashed 12,000 RPM limiter hardcut only, no gear limiters, i think that was it.
















Official Site Supporter

www.boostbysmith.com

Offline bouncer

  • Rider
  • ***
  • Posts: 240
  • Gender: Male
Re: Gen 2 ECU Flashing
« Reply #21 on: July 02, 2009, 10:48:31 PM »
Ok so how difficult is the install really? (easier than a pc3usb?)
Whenever you say no gear limiters do you mean all restrictions lifted like a tre would kinda do? (if they actually worked lol)
Would I still need my pc3 for my ti/force full system?
How much?
« Last Edit: July 02, 2009, 10:50:17 PM by bouncer »

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #22 on: July 03, 2009, 08:33:45 AM »
install in 5-10 minutes, very easy.  suzuki has a bunch of different fuel / ignition limiters based on gear that petrik is shutting off in the software.  no need for pc3 with this :)
Official Site Supporter

www.boostbysmith.com

Offline $treetRacer

  • Restricted
  • Rider
  • ***
  • Posts: 47
Re: Gen 2 ECU Flashing
« Reply #23 on: July 03, 2009, 09:01:38 AM »
This is AWSOME :thumb:

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: Gen 2 ECU Flashing
« Reply #24 on: July 03, 2009, 08:57:27 PM »
Spoke to Rick today, last night after we flashed it, he ran 6th gear up to 12,800 RPM indicated, so its a workin :)
Official Site Supporter

www.boostbysmith.com