Ok Guys N Gals,
This is a build tread for my 05 HyboOsa Streetfighter project that I purchased in January of this year, I bought it off of a member here called 929 adam. I traded my 01 CBR929RR streetfighter for it. Here are a couple of pics. It was also in Streetfighter Magazine.
This comes straight from another forum I am on, so some of it may not make any sense, but here is how it sat when I bought it:
I am thinking about putting a Kwak 636 tail and subby on it with underseat exhaust. Here are some pics of the seat plastic:
not too sure about the seat unit yet, may go with at gixxer thou, but not sure, we will see what happens after mock up.
here is a crappy photochop of some possible plans.
Hey guys, have not done alot since I got the bike from adam, been busy unpacking my stuff from moving a couple of weeks ago.
I zip tied a light to the bOosa so I could ride her:
Then, I moved the tach to a good visible location:
As you see, not much has changed:
As soon as my friend gets his 220v plug in his new shop, I will be fabbing up the 636 subby, so stay tuned, it should be done in a week or so. Also, i am still looking for a Z1000 headlight, so if anyone has one or comes across one, please PM me.
Ok, finally got some time to D some W!! not a whole lot, drilled the bolts out of the top clamp and removed the ignition. then I cut the loop off the top of the ignition, made a bracket, and mounted the acewell there.
Fabbed up a couple of little brackets to hold the temporary light.
Then i moved the ignition down beside the sprocket cover. Dont worry the coolant bottle will be the next thing I do.
Finally got the rear end together, and it will be fabbed to the bike soon.
Next I am bidding on a triumph 955 single sided swinger and wheel to put on it.
Got my new headlight. I wanted the z1000 lamp, but I could not find one. Here are some pics of the new light. Puts out 60 watts of light.
Then I got a chance to D some W, so I got to choppin the subby up. It is only mocked up right now, but it was almost like it was made for this bike!!
Just scored a used Boz Broz 4-2-1 slash cut full exhaust system from Roaring Toyz for $300
a little cleaning up, and it should be a nice pipe, but now I have to get me a power commander, crap, there goes more money!!
Just scored a couple of things off ebay, $100 for both, I think that was a deal.
First off we have a Front Brake Master Cylinder for a 04 05 CBR 1000
Then we have a matching Clutch Master Cylinder from a 04 05 CBR 1000:
These should clean up the bars a bit and help me get rid of those ugly block boOsa Master cylinders. Next up is some Stainless brake lines.
And a set of these for $25
I like the shorty Pazzo's it has on it right now, but I cannot afford to put pazzo's back on the CBR cylinders right now.
Got a chance to D some W!!! Had time to do some polishing on the unpolished stainless steel header.
Before:
After:
Just scored some mini resi's off of ebay, 2 for $40.
These are the actual paint colors I am going with:
Also forgot, I just got some mini resi's for the clutch and brake.
I have not been able to do much on the bike lately as it has been over at a friends house waiting for him to find free time to get to making the sub frame. But I have finished the radiator hard lines, put on the CBR 1000 Clutch and Brake Mastercylinders and installed the HEL SS clutch and brake lines. So, here are the pics.
Alright people, I know it has been a while since the last post, but my friend Randy has been backed up on work, so I have been waiting and now is my turn. And I have decided that when Randy is finished, I will pull the whole bike part and smooth the frame, swinger, subby, and rims and powdercoat them satin black.
In the mean time, I have these on the way:
Here are a couple of subby pics from today.
This is some of the new parts connecting the new subby to the old subby.
This is a pic with the seat cowl level with the tank.
Ok, got the lower supports made and welded on today.
Side shot with supports -- No more holding it up with screwdrivers or allen wrenches!!
Left Side closer up:
Right side closer up:
Rear shot -- I know it looks off center, but it is an optical illusion:
Left side Subby:
Right side Subby -- Test fitting the ECU:
Rear Subby:
And the undeside of the subby:
Had a chance to get some 4th of July DW (do work), dont worry, I will be re routing the ss brake lines.