Haybusa Parts and Service Member Support

Author Topic: 1430 HELP HELP  (Read 4914 times)

Offline BUSA750

  • Rider
  • ***
  • Posts: 283
1430 HELP HELP
« on: July 24, 2009, 06:36:18 PM »
found out today that my motor is a 1430 not a 1397 my question is how much can u spray a 1430
was doing a 1441 (1397+2) for nos 100+
got a feeling i will have to buy a 1397 set up

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 1430 HELP HELP
« Reply #1 on: July 26, 2009, 04:12:25 PM »
How did you find that out?

Offline BUSA750

  • Rider
  • ***
  • Posts: 283
Re: 1430 HELP HELP
« Reply #2 on: July 26, 2009, 04:54:01 PM »
How did you find that out?
went in it to put 2mm and rods and to my suprise
bought motor awhile back

Offline FASBUS

  • Legacy Rider
  • Post Master
  • *
  • Posts: 1286
Re: 1430 HELP HELP
« Reply #3 on: July 27, 2009, 10:51:19 PM »
Stock block bored to 4mm over sucks in my experience much less w /spray.Heres how mine ended up.

   

Offline FASBUS

  • Legacy Rider
  • Post Master
  • *
  • Posts: 1286
Re: 1430 HELP HELP
« Reply #4 on: July 27, 2009, 10:53:52 PM »
 was with 5mm crank though....

Offline BUSA750

  • Rider
  • ***
  • Posts: 283
Re: 1430 HELP HELP
« Reply #5 on: August 07, 2009, 03:23:50 PM »
i have seen a couple 1430 spraying 80 wet with no probable. it is just a dragbike

Offline show2ime2000

  • Rider
  • ***
  • Posts: 265
  • Gender: Male
Re: 1430 HELP HELP
« Reply #6 on: August 09, 2009, 11:02:03 AM »
run it dry and u will be fine with the 1430 and a bunch of spray. use block filler

Offline creative custom racing

  • Rider
  • ***
  • Posts: 147
  • Gender: Male
  • GET IN THEM LIGHTS
Re: 1430 HELP HELP
« Reply #7 on: August 28, 2009, 10:09:53 AM »
All our race Nos bikes are 1430s.Sprayed 125 for a couple of years and have not had a problem.

Offline BUSA750

  • Rider
  • ***
  • Posts: 283
Re: 1430 HELP HELP
« Reply #8 on: August 28, 2009, 04:27:49 PM »
found a 1397 went with that thanks for all the help :thumb: