Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Motor build  (Read 3298 times)

Offline Probusa1

  • Rider
  • ***
  • Posts: 22
Motor build
« on: August 17, 2009, 03:59:29 PM »
How big can you go on a 08 busa with out a stroker?
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: Motor build
« Reply #1 on: August 17, 2009, 05:45:16 PM »
+4mm but go with a gen1 cylinder. 08's are prone to blowing up. should put up the cc's to 1476. go to http://www.jepistons.com/cat/je/power/street/suzuki/gsx_1300r_08.shtml for more info. get with ape for pistons and a cylinder exchange for quick turn around. will get more power with a big valve head, port job and some cams.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline $treetRacer

  • Restricted
  • Rider
  • ***
  • Posts: 47
Re: Motor build
« Reply #2 on: August 18, 2009, 10:38:57 PM »
I have went 6mm :thumb: on a gen 2 crank with no problems.
Logged
Pages: [1]   Go Up
« previous next »