Author Topic: Got my new 12 over swingarm (Read 17343 times) Tweet

Sgtbusa · « **on:** September 13, 2009, 06:57:09 PM »

Finally upgraded from my 6 0ver to this beauty. Its a 12 over arm and just waiting on bearing from dealership to come in and I will be riding again. I will have have to get a 12 over tail, so anyone got a old one laying around let me know

Well let me know what ya think and Ill post up more pics as I complete it.

This is a shot of it more of what it will look like with the tail pieace on

This is what it used to look like with the 6 over arm

Sgtbusa · « **Reply #1 on:** September 14, 2009, 06:59:12 AM »

Sorry gonna get some bigger pics up for better detail. Will try and show a pic of a idea I had for bottle mounts. Gonna do a dual mount 1 for shifter and 1 for the nitrous.

Kurt · « **Reply #2 on:** September 14, 2009, 07:21:53 AM »

why not just run the shifter off the nitrous? one bottle that way

Sgtbusa · « **Reply #3 on:** September 14, 2009, 09:14:36 AM »

Hmmm, I didnt even know you could do that. And does that only work if I do dry shot and not wet? Thanks for the idea though.

smithabusa · « **Reply #4 on:** September 14, 2009, 09:56:22 AM »

Matt from cycletek can hook you up, I did wifes bike this way, basically just teeing off nos supply and running it to a co2 regulator

Kurt · « **Reply #5 on:** September 14, 2009, 09:57:45 AM »

there you go

Sgtbusa · « **Reply #6 on:** September 14, 2009, 05:29:15 PM »

Here is bigger pictures. Now you can see alittle better details.

And yea im gonna go that route with the single bottle, ill just go up from a small one to a larger so i can get normal use out of both of them. How about the buttons? I have the air shifter now thats hooked into my horn ad i flip the switch and turns horn into shifter, what button would I use in conjuction with the shifter on?

Kurt · « **Reply #7 on:** September 14, 2009, 05:46:01 PM »

same button your just changing where you get the supply from did you get a hold of Matt?

Doogie · « **Reply #8 on:** September 14, 2009, 09:50:38 PM »

I see your mechanic in the back ground

gfast2 · « **Reply #9 on:** September 14, 2009, 11:05:34 PM »

Sweet!

Patrick10R · « **Reply #10 on:** September 14, 2009, 11:40:59 PM »

Arm is too long. I would have kept the 6 over.

Sgtbusa · « **Reply #11 on:** September 15, 2009, 10:01:10 AM »

meh as they say to each is own, i love the stretched out look on these bikes. i just seen one from brocks and it had the 12 over and once i have it all done it will look really good. oh and if anyone was wondering i got the arm made from SB-customs.

954bob · « **Reply #12 on:** September 15, 2009, 10:09:10 AM »

Quote from: Sgtbusa on September 14, 2009, 05:29:15 PM

so in this pic are you looking at how the extra 6 inches of adjuster rod hanging out the back of the arm and thinking to yourself. man i should have went 12 just so i don't have to cut that all thread?

Sgtbusa · « **Reply #13 on:** September 15, 2009, 04:30:55 PM »

Right i know that thread was crazy long, I should have keept that and put that on the new 12 and been like i got a 12 over arm with BUT with my thread makes it 24 over

Sgtbusa · « **Reply #14 on:** September 15, 2009, 04:34:28 PM »

Quote from: Doogie on September 14, 2009, 09:50:38 PM

I see your mechanic in the back ground

I know right but damn mechanic always taking pics and not working on my bike

954bob · « **Reply #15 on:** September 15, 2009, 05:45:57 PM »

Quote from: Sgtbusa on September 15, 2009, 04:34:28 PM

Quote from: Doogie on September 14, 2009, 09:50:38 PM
I see your mechanic in the back ground

I know right but damn mechanic always taking pics and not working on my bike

well i'm sure if you pay him well he'd put down the camera. and the 24" arm. well now that's just retarded to even think about.

Sgtbusa · « **Reply #16 on:** September 15, 2009, 06:02:39 PM »

Yea 24 would be just dumb looking. I wonder whats the longest arm out there that someone uses.....

954bob · « **Reply #17 on:** September 15, 2009, 09:00:18 PM »

idiots are born everyday so you'd be amazed. ooooh it looks so cool.

Kurt · « **Reply #18 on:** September 15, 2009, 09:17:29 PM »

you should get it powdercoated to match the frame before you mount the bearings in it

Ludicrous Speed · « **Reply #19 on:** September 15, 2009, 09:53:21 PM »

You going to replace the rear tire to go with that arm??

Dennis Kirk is having a sale on paddle tires

BATTMAN · « **Reply #20 on:** September 15, 2009, 10:11:54 PM »

what made you want a 12 over arm? Is this a street bike or a grudge bike? Keep us posted on the install

954bob · « **Reply #21 on:** September 15, 2009, 11:33:49 PM »

Quote from: Ludicrous Speed on September 15, 2009, 09:53:21 PM

You going to replace the rear tire to go with that arm??

Dennis Kirk is having a sale on paddle tires

Sgtbusa · « **Reply #22 on:** September 16, 2009, 05:26:48 AM »

Quote from: kurtsbusa on September 15, 2009, 09:17:29 PM

you should get it powdercoated to match the frame before you mount the bearings in it

Huh my frame isnt powdercoated. s

Sgtbusa · « **Reply #23 on:** September 16, 2009, 05:27:56 AM »

Quote from: Ludicrous Speed on September 15, 2009, 09:53:21 PM

You going to replace the rear tire to go with that arm??

Dennis Kirk is having a sale on paddle tires

Shhhh dont tell people about that sell im stocking up on those tires

Kurt · « **Reply #24 on:** September 16, 2009, 07:26:17 AM »

Quote from: Sgtbusa on September 16, 2009, 05:26:48 AM

Quote from: kurtsbusa on September 15, 2009, 09:17:29 PM
you should get it powdercoated to match the frame before you mount the bearings in it
Huh my frame isnt powdercoated. s

I know that just saying PC it the alum color of the frame so it isn't just bare

News:

Author Topic: Got my new 12 over swingarm (Read 17343 times) Tweet