Haybusa Parts and Service Member Support
« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: 08 Turbo Busa Goal of 500HP with ecueditor only!  (Read 46127 times)

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Stage II
« Reply #25 on: December 19, 2009, 06:10:05 PM »

I would install a spacer for sure. Install s2000 injectors and be good for 300hp. It will take u 2 weeks and u will be wanting more boost.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline servion

  • Site Donor
  • Rider
  • *
  • Posts: 397
  • Gender: Male
    • Servion Tuning
Re: 08 Turbo Busa Stage II
« Reply #26 on: December 21, 2009, 03:01:48 PM »
I was looknig into s2000 injectors today, I just don't know if they'll support much power on e85 (30% more fuel for the same boost level).  I was looking at the mps 62lb ones or the new injector dynamics 725cc ones (awesome flow pattern and saturated too).  Not sure if they drop in though
Logged
Official Site Donor
8.61@168.9 1.47 60' - E85 stock motor gen1 streetbike
My Autronic SM4 Stage 1 build

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Stage II
« Reply #27 on: December 30, 2009, 02:33:34 PM »
Id go for the 62lb injectors then. mps ive heard does pretty good, just need to reflash the stock ecu for the bigger injectors being used. makes tuning way easier.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Stage II
« Reply #28 on: January 09, 2010, 07:31:26 PM »
We'll Im back from vacation. 2 weeks off of work and lovin it, 1 week in Key West and another week in Phoenix. Key west average was 78-82 degrees and phx about 60-65 degrees. Now Denver, below freezing and snowy! I had some extra time to work on the bike. Decided to go with gen1 valve springs and the genII Ti valves. Barry in a previous topic stated 300hp is fine for both the stock rods and stock Ti valves. The pressure difference between the stock gen1 at 43lbs and the genII is 26 so 17lbs extra seating pressure. Im only going to be running however many psi of boost to make that 300hp mark. I took a pic of what the different valve springs look like. For those who havent seen them, on the left is the gen1 spring with 2 springs, an outer and an inner. On the right the genII just 1 spring. This should give me just a little piece of mind for the making sure the valves dont float at higher boost levels and rpm.

Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: 08 Turbo Busa Stage II
« Reply #29 on: May 18, 2010, 01:40:10 PM »
ahh yes, i was looking at this page earlier but wasn't paying attention to whos thread it was.  Where do you get and how much are the gen1 springs?  Is that the only thing that needs to be replaced, ie, not the valves or retainers?  Your project does look good so far, updated pics?
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Stage II
« Reply #30 on: December 25, 2010, 08:07:20 PM »
Well i havent posted anything up for a while so I guess i better get to it. So far i have stripped the busa down for a full build! Everything is going be getting powdercoated gloss black if possible.











Im going to be powdercoating gloss black the frame, swingarm after i make a few cuts and modifications to it :D, internally lower the front forks 2" and powdercoat the remaining parts gloss black and '05 gsxr1000 rims are a few to start! I will post up pics when i get new ones taken and in my spare time when not working a crapload!
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: 08 Turbo Busa Stage II
« Reply #31 on: December 26, 2010, 09:03:44 AM »
You got a pic of thr turbo, and did you ever get your plenum??
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Stage II
« Reply #32 on: December 26, 2010, 03:50:11 PM »
i dont have a pic of the turbo or the plenum yet. im ordering the new turbo after the first of the year. once i get it i will post up a pic. im going to be purchasing a t3/to4e 60trim turbo with .82 a/r exhaust turbine dbb garrett turbo. it should get me to about the 500hp level!
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #33 on: December 26, 2010, 05:47:00 PM »
That will be badass. Looks like I'm slightly ahead of you in this build. Where do you live?
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #34 on: December 26, 2010, 06:01:52 PM »
Mile High Denver! For out here in Denver this hopefully 500hp busa will be one of the higher powered bikes around. there is only a couple of people have that high of hp. So figured im going to get into racing more seriously this next summer. First of the year also starts a diet and hopefully lose 30lbs if not more by then too! My ultimate goal is to do 200mph here at Bandimere in morrison which i think is a lil higher like 5600ft in elevation.
« Last Edit: December 26, 2010, 06:22:24 PM by egarms »
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #35 on: December 26, 2010, 06:20:28 PM »
Oh ok. I live in the wash, dc area where its ruled by chrome, nos and swingarms. I don't even know of any turbo bikes. I think there are several, not anywhere near 500 that I'm shooting for. I've never had more then 230hp so I'm kind of nervous. I already have next year goals and another build haha!!
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #36 on: December 26, 2010, 06:23:07 PM »
Another busa?
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #37 on: December 26, 2010, 06:44:20 PM »
No, this one. Maybe gt40 or bigger, bigger inj and e85. 
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #38 on: December 26, 2010, 08:16:40 PM »
GTX35R! They claim 750hp! Totally redesigned. here in a year or 2 i plan on having one!
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline T JONES(JPR)

  • Rider
  • ***
  • Posts: 363
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #39 on: December 26, 2010, 08:51:58 PM »
cool build, and nice building! :thumb:
Logged

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #40 on: December 27, 2010, 07:33:33 AM »
Quote from: egarms on December 26, 2010, 08:16:40 PM
GTX35R! They claim 750hp! Totally redesigned. here in a year or 2 i plan on having one!

And then you'll see the price and  :puke:

Looks like retail will be quite a bit over $2ki

There soon will be other options available. If you are not looking at any rules, the GT3586 billet wheel compressor will work well, the inlet is not Prostreet (Mirock) legal though
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #41 on: December 27, 2010, 08:35:54 AM »
Quote from: sportbikeryder on December 27, 2010, 07:33:33 AM
Quote from: egarms on December 26, 2010, 08:16:40 PM
GTX35R! They claim 750hp! Totally redesigned. here in a year or 2 i plan on having one!

And then you'll see the price and  :puke:

Looks like retail will be quite a bit over $2ki

There soon will be other options available. If you are not looking at any rules, the GT3586 billet wheel compressor will work well, the inlet is not Prostreet (Mirock) legal though

Yeah the price is way high! But still one hell of a turbo!
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline BATTMAN

  • Mad Post Whore
  • ******
  • Posts: 4032
  • Gender: Male
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #42 on: December 27, 2010, 02:33:46 PM »
There are a few big horsepower bikes in the DC area.  Not too many of them are streetable.
Logged

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #43 on: December 27, 2010, 03:20:59 PM »
Thats why they make boost controllers right?
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline BATTMAN

  • Mad Post Whore
  • ******
  • Posts: 4032
  • Gender: Male
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #44 on: December 27, 2010, 03:37:25 PM »
a boost controller is my best friend
Logged

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #45 on: December 27, 2010, 03:58:21 PM »
Quote from: egarms on December 27, 2010, 08:35:54 AM
Quote from: sportbikeryder on December 27, 2010, 07:33:33 AM
Quote from: egarms on December 26, 2010, 08:16:40 PM
GTX35R! They claim 750hp! Totally redesigned. here in a year or 2 i plan on having one!

And then you'll see the price and  :puke:

Looks like retail will be quite a bit over $2ki

There soon will be other options available. If you are not looking at any rules, the GT3586 billet wheel compressor will work well, the inlet is not Prostreet (Mirock) legal though

Yeah the price is way high! But still one hell of a turbo!

Well, maybe the price won't be so bad....
http://www.turblown.net/store/index.php?productID=218
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #46 on: December 29, 2010, 10:25:58 AM »
Just received my RCC fuel rail with 85lb secondary injectors. will take pics when i get home. tkaing a half day just to go home and work on the busa! Thanks again Richard for another superior product!
« Last Edit: December 29, 2010, 10:28:50 AM by egarms »
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #47 on: December 29, 2010, 02:17:51 PM »
Ok heres the new fuel rail and injectors and i didnt take a picture of it but i have bosch 044 fuel pump


05 gsxr1000 rims


Falicon Knife rods, they are for a gen1 so i have to get a set of gen1 turbo pistons


And lastly my bike all taken apart!


Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline murderedout07

  • Mad Post Whore
  • ******
  • Posts: 3329
  • Gender: Male
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #48 on: December 31, 2010, 02:09:10 AM »
Can you even run the 1k rims one a Gen2? I remember hearing awhile back that it wasnt possible for some reason.
Logged

TURBOLAG: The split second the other guy thinks hes winning.

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: 08 Turbo Busa Goal of 500HP with ecueditor only!
« Reply #49 on: December 31, 2010, 06:17:47 AM »
Well we will have to see. i am waiting on the spacers and im trying out a different brake bracket. i may have to swap over to a gsxr rear caliper and then just spacers like usual.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson
Pages: 1 [2] 3   Go Up
« previous next »