Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Dynoed the busa today  (Read 18568 times)

Offline 09blackbusa

  • Rider
  • ***
  • Posts: 20
  • Gender: Male
Dynoed the busa today
« on: October 10, 2009, 03:47:46 PM »
Put down a few horse under what I was hoping for. 183.51 HP and 107.86 Tq. Made a few changes to the map and picked up 8-10 hp in the midrange but the same peak HP. One good thing is it holds over 175 hp from 8800-11000 .

If I can find my scanner I will post up the dyno slip later.
Stock air filter in. Just the pipe and PCV
Dyno was Victory V-Twin in indy
Logged
09 Black/gray ackrapovic full system,short stacks,K&N race, 1 down front,2 up rear,ECU Editor w/ Schnitz custom tune, 4.5 in stretch. 186 RWHP

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: Dynoed the busa today
« Reply #1 on: October 10, 2009, 05:01:48 PM »
those gen2 makes some good power :thumb:
Logged

Offline mrultra1300r

  • Post Master
  • *****
  • Posts: 1428
  • Gender: Male
  • RCC Turbos USA
Re: Dynoed the busa today
« Reply #2 on: October 10, 2009, 05:27:32 PM »
 thats decent power whats done? my 08 made 187.98hp  110lb tq. with brocks street meg. w/baffel and pc3
Logged
Official Site Supporter
https://www.facebook.com/home.php#!/pages/Ricks-Custom-Cycle/194149464017698

www.RICKSCUSTOMCYCLE.com
paypal mrturbo1300@aol.com
TURBOCHARGING THE WORLD

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: Dynoed the busa today
« Reply #3 on: October 10, 2009, 06:06:12 PM »
Quote from: mrultra1300r on October 10, 2009, 05:27:32 PM
thats decent power whats done? my 08 made 187.98hp  110lb tq. with brocks street meg. w/baffel and pc3

If I had to guess, I would say stock air filter in. Just the pipe and PCV.
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline 09blackbusa

  • Rider
  • ***
  • Posts: 20
  • Gender: Male
Re: Dynoed the busa today
« Reply #4 on: October 10, 2009, 06:30:01 PM »
Quote from: mrultra1300r on October 10, 2009, 05:27:32 PM
thats decent power whats done? my 08 made 187.98hp  110lb tq. with brocks street meg. w/baffel and pc3
09 Black/gray ackrapovic full system, 1 down front,1 down rear, PC-V    My sig :wink:
Logged
09 Black/gray ackrapovic full system,short stacks,K&N race, 1 down front,2 up rear,ECU Editor w/ Schnitz custom tune, 4.5 in stretch. 186 RWHP

Offline 6002abusa

  • Rider
  • ***
  • Posts: 189
Re: Dynoed the busa today
« Reply #5 on: October 13, 2009, 12:37:34 PM »
I made 184.6
Logged

Offline 09blackbusa

  • Rider
  • ***
  • Posts: 20
  • Gender: Male
Re: Dynoed the busa today
« Reply #6 on: October 14, 2009, 05:59:51 PM »
Logged
09 Black/gray ackrapovic full system,short stacks,K&N race, 1 down front,2 up rear,ECU Editor w/ Schnitz custom tune, 4.5 in stretch. 186 RWHP

Offline 6002abusa

  • Rider
  • ***
  • Posts: 189
Re: Dynoed the busa today
« Reply #7 on: October 14, 2009, 06:52:26 PM »
Full Muzzy, K&N, and Bazzaz
Logged

Offline BusaBear

  • Apprentice Post Whore
  • **
  • Posts: 11
  • Gender: Male
  • doing it up
Re: Dynoed the busa today
« Reply #8 on: October 16, 2009, 08:57:57 AM »
187.6hp 114touqe. full brooks exhaust with baff. still n  :lol:
Logged

Offline 6002abusa

  • Rider
  • ***
  • Posts: 189
Re: Dynoed the busa today
« Reply #9 on: October 19, 2009, 11:46:30 AM »
I dynoed the same day as my buddy with a Brocks Alien Head and Bazzaz with a K&N. We are within 1 hp of eachother.
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #10 on: December 07, 2010, 08:19:33 PM »
Im up in Anderson....ran mine at Ryans'   

20/50 Amsoil
Pair valve removed/plates
Stock filter
2000ish miles at that time
ECU flashed...using 93 octane
Tiforce Full ti system
183.5 hp with 106 torque....96F

M
Logged

Offline turbor1391

  • Rider
  • ***
  • Posts: 178
  • Gender: Male
Re: Dynoed the busa today
« Reply #11 on: December 08, 2010, 02:47:17 PM »
Those are some nice numbers :thumb:
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #12 on: December 08, 2010, 05:20:11 PM »
Oops...107 torque on mine too...
Logged

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: Dynoed the busa today
« Reply #13 on: December 08, 2010, 06:04:41 PM »
Made 186 on ryans dyno bone stock 
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #14 on: December 08, 2010, 06:21:24 PM »
Sounds high ...never seen a stock stock bike that high. 
Logged

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: Dynoed the busa today
« Reply #15 on: December 08, 2010, 09:14:59 PM »
Quote from: Mpeavler on December 08, 2010, 06:21:24 PM
Sounds high ...never seen a stock stock bike that high. 


Highest hp out of a stock bike on Ryans dyno 0 miles and broke in on dyno for 75 miles or so
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #16 on: December 08, 2010, 09:20:59 PM »
Did u take it with Gsxr wheels on it and swap to (0) weight oil ?   I rem Ryan telling me about a bike but cams were degree in etc...it was not (box stock). I believe your Also the cat that sold Nathan his green busa yes from Alexandria?
« Last Edit: December 08, 2010, 09:41:02 PM by Mpeavler »
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #17 on: December 08, 2010, 09:42:51 PM »
51 runs for a stock bike...come on now? No info at bottom of dyno like (stock 08) busa etc !!
Logged

Offline bikefrk

  • Post Whore
  • ****
  • Posts: 987
  • WestSide,Mi
Re: Dynoed the busa today
« Reply #18 on: December 08, 2010, 10:41:53 PM »
Logged

Offline STUNNAH

  • Post Master
  • *****
  • Posts: 1582
  • Gender: Male
Re: Dynoed the busa today
« Reply #19 on: December 08, 2010, 11:43:47 PM »
Quote from: bikefrk on December 08, 2010, 10:41:53 PM

Got a little something going on here...Could it be  :hys: gas???
Logged
Getting "Blown" is a hell-of-a drug...STUNNAH...

Offline bikefrk

  • Post Whore
  • ****
  • Posts: 987
  • WestSide,Mi
Re: Dynoed the busa today
« Reply #20 on: December 09, 2010, 08:22:59 AM »
Quote from: STUNNAH on December 08, 2010, 11:43:47 PM
Quote from: bikefrk on December 08, 2010, 10:41:53 PM

Got a little something going on here...Could it be  :hys: gas???

Hmmmm, maybe!

I did, it went way wrong so I took it off. Ran a 9.21@159mph SWB with that setup!

After I popped the motor I took the "helper"(LOL) off and ran a 9.35 SWB N/A. I'm happy with that.

Ryan put a good N/A tune on the bike for me!

It was a bad dyno day there also. HOT and humid. Probably cost me 10hp that day.
Logged

Offline Cycle Concepts

  • Rider
  • ***
  • Posts: 326
  • Gender: Male
    • Cycle Concepts Racing
Re: Dynoed the busa today
« Reply #21 on: December 09, 2010, 08:26:24 AM »
He's also using STD correction which will give you a higher number than SAE..change over to SAE and you will loose 3-5 hp..
Logged

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: Dynoed the busa today
« Reply #22 on: December 09, 2010, 06:17:27 PM »
Quote from: Mpeavler on December 08, 2010, 09:20:59 PM
Did u take it with Gsxr wheels on it and swap to (0) weight oil ?   I rem Ryan telling me about a bike but cams were degree in etc...it was not (box stock). I believe your Also the cat that sold Nathan his green busa yes from Alexandria?
It was  Stock the motor was never touched it had the same oil in it that Suzuki sent in the bike. That's the truth!!! it was Box stock Ryan puled the filter to see if it gained any it did not  it might of if I had something on it to tune with.

Here is another Dynosheet when we were trying to figure out duty cycle of the injectores.

Trust me i don't need to lie about dyno numbers it is what it is . I had a strong bone stock bike but  i never road it that way i tore it apart and now it makes 450 hp on E-85 would most powerful 2 wheel bike on E-85. So you may think I'm not telling the truth but I am I have no reason to lie i wouldn't of cared if it made 150 HP i was building a turbo bike and tearing it down as soon as we got it off the dyno. Ryan and i wanted to learn somethings about it before i touched it. So it was Stock.

Here is the King Klover as it is today
http://www.suzukihayabusa.org/forum/index.php?topic=150315.0;all
Logged

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: Dynoed the busa today
« Reply #23 on: December 09, 2010, 06:19:10 PM »
BTW yes I sold Nate The Green White Busa.

We Broke the bike in on the DYNO it had 0 miles on it
« Last Edit: December 09, 2010, 06:33:08 PM by 469 Boy*Robert Kelly »
Logged

Offline Mpeavler

  • Rider
  • ***
  • Posts: 80
Re: Dynoed the busa today
« Reply #24 on: December 09, 2010, 06:43:00 PM »
Rob first I've heard about your bike from Ryan and I was never calling a liar just poking the ribs  :wink:

It was/is rare to see a bike making that much HP.  I had a 2000 busa that was very strong and Ryan tuned it ..further tuned by Dennis in Cleavland then Lee put more effort into it.  My 2000 busa stock bore/stock head with dual intake cams at 105/105, carbon airbox, balancer removed, stacks etc made 184hp...it was a fast bike.  I along with many are bummed to see your bike making what mine does with a pipe   :cry:
Logged
Pages: [1] 2  All   Go Up
« previous next »