Haybusa Parts and Service Member Support

Author Topic: Now I need your imput on cam timing!!  (Read 3329 times)

Offline 06stocker

  • Rider
  • ***
  • Posts: 186
  • Gender: Male
  • Speed Kills
Now I need your imput on cam timing!!
« on: November 08, 2009, 04:08:45 PM »
I retarded the cams to help wheel standing and the bike slowed down 2 tenths..I just changed them a 2 degrees and I killed the bike,please explain and what cam timing do you guys like..Is stock cam timing the best!!

Offline dave3.4

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1932
  • Gender: Male
Re: Now I need your imput on cam timing!!
« Reply #1 on: November 08, 2009, 06:24:07 PM »
for a stock motor I would stick with 105/105 :thumb:

Offline Nem

  • Mad Post Whore
  • ******
  • Posts: 3039
  • Gender: Male
    • BallOutRacing.org
Re: Now I need your imput on cam timing!!
« Reply #2 on: November 08, 2009, 09:02:57 PM »
Where are they at now

RCC Turbos
Bellman Oil Co.
VP Race Fuels
BoostbySmith
Cycle-Tek
Canadian Mike
Power Brokers Racing
Tiger Racing
Shamrock Racing
Rev'd Up Motorsports
Win Racing
Rock Solid
Schnitz Racing

Offline glenn71

  • Post Master
  • *****
  • Posts: 1102
  • Gen 1 stock length allmotor tragic
Re: Now I need your imput on cam timing!!
« Reply #3 on: November 09, 2009, 02:08:55 PM »
104/100 stock 106/103 was what i ran and it picked up 7hp.If you lost bottom end comapre your 60 and 330 times with both setups,thats where its won or lost.then comapre your 330-1320 split with both setups to judge hp made whilst in the sweet rpm range of the bike.
Gen1 the original and the best
8.76@165.42mph so far

Offline 06stocker

  • Rider
  • ***
  • Posts: 186
  • Gender: Male
  • Speed Kills
Re: Now I need your imput on cam timing!!
« Reply #4 on: November 09, 2009, 06:59:50 PM »
The cams were retarded 2 degrees from stock and the compression ration was pump up alittle,we shaved the head  .025 thousand..Trying to make it come out with out standing up on its ass and added a 4 inch arm to make it look stock under the stock tail..going to the track this weekend but it just feels alittle slow,I was thinking about taking it to the dyno..Ok guys give your imput!!