Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: DL-32 Rpm signal for gen2??  (Read 3057 times)

Offline SKILLZ

  • Rider
  • ***
  • Posts: 257
  • Gender: Male
  • Where am I?
DL-32 Rpm signal for gen2??
« on: January 31, 2010, 09:10:55 PM »
I am trying to figure out what I am doing wrong on my dl-32 I am not getting a signal from the #1 injector grey/ wt tracer at the ecu.....  When I had an LM1 on the bike I was using the white/ blue tracer to get signal, and It worked fine, but now I am wanting to get duty cycle and rpm from the injector and it is not working....

I did hook the dl32 up to the white/blue tracer and it was only reading 360 rpm at idle which it should be reading around 1200.

Any ideas?
Logged
8.95 @152.40 on 06 stock bore N/A

08' 8.75 @159.18 stock bore N/A  @1900" DA

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: DL-32 Rpm signal for gen2??
« Reply #1 on: February 01, 2010, 07:58:05 AM »
Do you have the settings correct for the dl32? Maybe it is 1/4th what it should be?
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline SKILLZ

  • Rider
  • ***
  • Posts: 257
  • Gender: Male
  • Where am I?
Re: DL-32 Rpm signal for gen2??
« Reply #2 on: February 01, 2010, 08:28:51 AM »
Well I now have it hooked up to the injector grey/wt tracer and I am getting nothing. I have it set for 4cyl and 4 stroke.
Logged
8.95 @152.40 on 06 stock bore N/A

08' 8.75 @159.18 stock bore N/A  @1900" DA

Offline SKILLZ

  • Rider
  • ***
  • Posts: 257
  • Gender: Male
  • Where am I?
Re: DL-32 Rpm signal for gen2??
« Reply #3 on: February 01, 2010, 04:02:11 PM »
Got it figured out had to put it in 1 cyl mode :thumb:
Logged
8.95 @152.40 on 06 stock bore N/A

08' 8.75 @159.18 stock bore N/A  @1900" DA

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: DL-32 Rpm signal for gen2??
« Reply #4 on: February 01, 2010, 06:18:56 PM »
Quote from: SKILLZ on February 01, 2010, 04:02:11 PM
Got it figured out had to put it in 1 cyl mode :thumb:

 :thumb:
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning
Pages: [1]   Go Up
« previous next »