Haybusa Parts and Service Member Support

Author Topic: Dragracing a zx14  (Read 9292 times)

Offline Dutchman

  • Rider
  • ***
  • Posts: 201
  • Where am I?
Dragracing a zx14
« on: March 29, 2010, 03:08:21 PM »
I was wondering what are the times with a zx14 lowered
pipe and good tune inthere what can of times do we expect.

I was thinking to go race a zx14  and turbo charged the thing or go on Juice

What do you guys think?

I saw some good numbers on jeremy bike and gadson and so on :thumb:

Offline 00Busa

  • Post Master
  • *****
  • Posts: 1790
  • Gender: Male
Re: Dragracing a zx14
« Reply #1 on: March 30, 2010, 12:27:24 PM »
They will run 5.80s~5.70s will bolt-ons, pipe, PC and gearing. Your weight makes a big difference. I weigh 170~175 and do it regularly.
I'm not sure in a 1/4 mile. Jeremy and Ricky's skills are out of my league.
'00 Busa / '06 1K / '12 HD-SG
BE SAFE - HAVE FUN !

Offline Red

  • Post Master
  • *****
  • Posts: 1355
  • Gender: Male
    • http://www.revival.tv
Re: Dragracing a zx14
« Reply #2 on: April 03, 2010, 11:58:05 PM »
http://www.youtube.com/watch?v=_mh37565qhE

Just check that ZX14 out . . .

Red,    *<(:{)-
1999 Prostar West Super Gas Champion !
2000 NMRA / Prostar Pro E/T runner up.
2001, 2002, & 2003 NMRA Pro E/T Champion !
2004 #3, 2005, & 2006 NMRA Pro E/T runner up.
2007 Pro. St. Legal #6, NMRA Pro E/T Champion !
2008 MDRA Super Streetbike Champion !

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: Dragracing a zx14
« Reply #3 on: April 06, 2010, 10:24:12 AM »
Well I cosidedr myself just an average rider and with just swingarm extensions, lowewrd,Brock gen 3 exhaust I went
1.456
3.878
5.894
9.14
And I weigh 215 unsuited and that was pump gas 87
2008 Busa

Offline dadofthree

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1719
  • Gender: Male
Re: Dragracing a zx14
« Reply #4 on: April 11, 2010, 09:01:00 AM »
You should run just behind a Busa  :lol:

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: Dragracing a zx14
« Reply #5 on: April 11, 2010, 09:16:52 AM »
Nope the 14's and gen2 Busa will run so close to one another it's not even funny.
2008 Busa

Offline cajunboys

  • Rider
  • ***
  • Posts: 254
  • Gender: Male
Re: Dragracing a zx14
« Reply #6 on: April 13, 2010, 07:06:31 AM »
Nope the 14's and gen2 Busa will run so close to one another it's not even funny.

 :thumb: :thumb: :thumb: :thumb: :thumb: :thumb: I have the Orig. 99,   & a 06- zx-14
« Last Edit: April 13, 2010, 02:27:47 PM by rrtbusa »

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: Dragracing a zx14
« Reply #7 on: April 13, 2010, 02:08:30 PM »
Nope the 14's and gen2 Busa will run so close to one another it's not even funny.

 :thumb: :thumb: :thumb: :thumb: :thumb: :thumb:

Lots of guys just don't want to admit it!
2008 Busa

Offline 1vapors

  • Rider
  • ***
  • Posts: 298
Re: Dragracing a zx14
« Reply #8 on: May 07, 2010, 10:50:48 AM »
http://www.youtube.com/watch?v=_mh37565qhE

Just check that ZX14 out . . .

Red,    *<(:{)-

Red that's not nice he is defiantly no Augie and probably not on a fully sponsored tricked out 14.
If he can't cut 1.4's sixty footer like Bently he will probably run mid to high nine's.  The 14 is close but all riders feel its only close not faster than the genII busa's.
Most Magazines have tested the Busa faster also most magazine riders are just average joe.  Bently is not average look at his 330's and 60's
« Last Edit: May 07, 2010, 10:59:41 AM by 1vapors »

Offline spencer99

  • Rider
  • ***
  • Posts: 87
Re: Dragracing a zx14
« Reply #9 on: October 02, 2010, 09:46:35 PM »
i went 5.62 with a 1.38 60 at 129 with a 40 shot at 4500 feet