Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: so i did the strut ....guess what  (Read 18398 times)

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
so i did the strut ....guess what
« on: March 30, 2010, 05:21:37 PM »
check this shit out,,, i put the strut on ok not bad at all on a 1 to 10 scale i give it a 7,,,so i make some passes with it ,them im bout to race my buds 1000 when i hit 3rd i feel like my brake is sticking,so i hit it more THEN my left foot hits the groung &flies out to the side ,when i pull the clutch the bike comes to a hault!!! well guess what the links broke sending the tire into the fender .....fuct up ey...nothing majorly screwd just scraped for the most part ...had this happened to anyone with anytype of lwrng links with the strut? i fixed it quick ,made some links myself out of steel...........from experience what else should i look for as far as breaking with the strut? will the shit hold up? i rode with the steel links & did great but i had to pull that one outta the sleve what else should i expect from the srut?
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline dakinebusa

  • Mad Post Whore
  • ******
  • Posts: 3579
  • Gender: Male
Re: so i did the strut ....guess what
« Reply #1 on: March 30, 2010, 05:46:06 PM »
You are starting to understand why suspension was invented.
Logged

Offline EXTREMEFUN1300

  • Cycle Tek
  • Site Supporter
  • Mad Post Whore
  • ****
  • Posts: 3518
    • www.cycle-tek.com
Re: so i did the strut ....guess what
« Reply #2 on: March 30, 2010, 05:46:19 PM »
Just a cracked subframe is all, nothing major.   :?
Logged

Offline FlatlandBusa

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 2606
  • Gender: Male
  • -John- Middleofnowhere, Nebraska
Re: so i did the strut ....guess what
« Reply #3 on: March 30, 2010, 06:01:26 PM »
If ya make the links stronger something else is going to give, cause there is no movement in a shock any more with the stiff strut and all the shock from bumps on the road go some were.

Glad ya didn't cause more damage cause of it breaking your links.  :thumb:
« Last Edit: March 30, 2010, 06:09:05 PM by FlatlandBusa »
Logged
"You can not escape the responsibility of tomorrow by evading it today."
-Abraham Lincoln

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #4 on: March 30, 2010, 08:02:02 PM »
yeah thanxs guys the part that i didnt mention was thas i was getting out o work to lunch doing 100 plus triying to pass a  coworker killing my buddy and started noticing the bike was slowing down ...im just gratefull to GOD that te bike didnt get sideways wich would have been terminal...& that the buddy behind me always watches my ass & stopped ...the steel links have held up good so far,i got bout 4 hrs of street time,7 passes & 170 mph on em wich is more than the other links held they preety much lasted 10 miles  to work & a few passes then broke at lunch scary...now im kinda skeptical about the strut ,for now ill inspect when i get off bike.......please strut users can you share  experiences pros & cons and if youve had broken parts with the strut :thumb:before iill myself



« Last Edit: March 30, 2010, 08:08:46 PM by busaBuster »
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline moparict

  • Post Whore
  • ****
  • Posts: 737
Re: so i did the strut ....guess what
« Reply #5 on: March 30, 2010, 10:33:29 PM »
The aluminum 3-hole type links have a history of braking.
Logged

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: so i did the strut ....guess what
« Reply #6 on: March 30, 2010, 10:40:53 PM »
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.

Really? I have never seen them break
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: so i did the strut ....guess what
« Reply #7 on: March 30, 2010, 10:43:18 PM »
Why would you run a strut on a streetbike that has no significant poser mods that sometimes require a strut (such as an extremely wide tire kit)?
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline FlatlandBusa

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 2606
  • Gender: Male
  • -John- Middleofnowhere, Nebraska
Re: so i did the strut ....guess what
« Reply #8 on: March 30, 2010, 11:45:02 PM »
Quote from: sportbikeryder on March 30, 2010, 10:43:18 PM
Why would you run a strut on a streetbike that has no significant poser mods that sometimes require a strut (such as an extremely wide tire kit)?

Or even appear to be low enough to require one from what the picture looks like.
Logged
"You can not escape the responsibility of tomorrow by evading it today."
-Abraham Lincoln

Offline Reverend Ron

  • Post Master
  • *****
  • Posts: 1096
  • Gender: Male
  • I fly a starship across the Universe divide
Re: so i did the strut ....guess what
« Reply #9 on: March 31, 2010, 11:33:27 AM »
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine
Logged
O Lord please put one hand on my shoulder and the other across my mouth

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #10 on: March 31, 2010, 06:25:47 PM »
well the major reason is that i am 300lb 6 ft just a little ovweight :thumb: and the way it was on the picture it would bottom out every other bump( still had the shock),also my wife loves to ride and i know it wouldent work with the shock,i also as well love the low look.
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #11 on: March 31, 2010, 06:27:30 PM »
Quote from: Reverend Ron on March 31, 2010, 11:33:27 AM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine



rev ron do you run a strut as well?
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline moparict

  • Post Whore
  • ****
  • Posts: 737
Re: so i did the strut ....guess what
« Reply #12 on: March 31, 2010, 06:31:04 PM »
Quote from: sportbikeryder on March 30, 2010, 10:40:53 PM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.

Really? I have never seen them break


This is one post I found that I can remember, but I'm sure I remember more.  Maybe I'm wrong, but I will stick with my adjustables.

http://www.extremebusa.com/extreme/brakes-suspension-modifications-gen1b/10803-important-anyone-who-cut-last-hole-links.html
Logged

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #13 on: March 31, 2010, 06:44:41 PM »
deeemeeet mopatric that brings flashbacks step bu step what happened to me ,too bad you cant see the pix,,i guess the alum link are breakable under all the right circumstances,what i would like to know is if now that my links are thick steel and wont give...will the fwd frame mount,center bellcrank,and the swingarm mount hold?????....done deal with them great post
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: so i did the strut ....guess what
« Reply #14 on: March 31, 2010, 06:47:19 PM »
Quote from: moparict on March 31, 2010, 06:31:04 PM
Quote from: sportbikeryder on March 30, 2010, 10:40:53 PM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.

Really? I have never seen them break


This is one post I found that I can remember, but I'm sure I remember more.  Maybe I'm wrong, but I will stick with my adjustables.

http://www.extremebusa.com/extreme/brakes-suspension-modifications-gen1b/10803-important-anyone-who-cut-last-hole-links.html


If the bottom of the link is cut off, it is much weaker. The link in the post broke because the owner cut off the part of the link that prevents it from doing what it did. Just putting it in the upper holes is not good enough if the bottom is cut off.
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #15 on: March 31, 2010, 07:06:08 PM »
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: so i did the strut ....guess what
« Reply #16 on: March 31, 2010, 07:13:26 PM »
Quote from: busaBuster on March 31, 2010, 07:06:08 PM


Did you remove the material below the lower hole on purpose?
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline Cookie

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 9875
  • I'VE UPPED MY STANDARDS ,,, SO UP YOURS!
Re: so i did the strut ....guess what
« Reply #17 on: March 31, 2010, 07:20:53 PM »
Quote from: Reverend Ron on March 31, 2010, 11:33:27 AM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine
You have a 5 hole?  :hys:
Logged
-Chris

גַּבְרִיאֵל guide me to the light ישוע המשיח

Offline Cookie

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 9875
  • I'VE UPPED MY STANDARDS ,,, SO UP YOURS!
Re: so i did the strut ....guess what
« Reply #18 on: March 31, 2010, 07:22:47 PM »
Quote from: busaBuster on March 30, 2010, 05:21:37 PM

check this shit out,,, i put the strut on ok not bad at all on a 1 to 10 scale i give it a 7,,,so i make some passes with it ,them im bout to race my buds 1000 when i hit 3rd i feel like my brake is sticking,so i hit it more THEN my left foot hits the groung &flies out to the side ,when i pull the clutch the bike comes to a hault!!! well guess what the links broke sending the tire into the fender .....fuct up ey...nothing majorly screwd just scraped for the most part ...had this happened to anyone with anytype of lwrng links with the strut? i fixed it quick ,made some links myself out of steel...........from experience what else should i look for as far as breaking with the strut? will the shit hold up? i rode with the steel links & did great but i had to pull that one outta the sleve what else should i expect from the srut?


And now you know why no one does LSR with this type of equipment.

Glad you made it out alright. Safety first, Brother. Fun second.
Logged
-Chris

גַּבְרִיאֵל guide me to the light ישוע המשיח

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #19 on: March 31, 2010, 07:23:51 PM »
yup just like the instructions say to do to fit ....either way im sure if never cut ,it only uses the in between material for support...the other holes would have made no diff.,,,when it was time to break it would just fall in the next hole.................huuuum i would at leaast had 2 chances to notice something was wrong
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #20 on: March 31, 2010, 07:25:33 PM »
Quote from: Cookie on March 31, 2010, 07:20:53 PM
Quote from: Reverend Ron on March 31, 2010, 11:33:27 AM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine
You have a 5 hole?  :hys:
nope bro 3 hole.....theres a 5 car long tire burn mark at work my buddys thought i was seriously was gonna die
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #21 on: March 31, 2010, 07:27:19 PM »
Quote from: Cookie on March 31, 2010, 07:20:53 PM
Quote from: Reverend Ron on March 31, 2010, 11:33:27 AM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine
You have a 5 hole?  :hys:
shiiiiit now is a 1 hole link :hys:
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline Cookie

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 9875
  • I'VE UPPED MY STANDARDS ,,, SO UP YOURS!
Re: so i did the strut ....guess what
« Reply #22 on: March 31, 2010, 07:32:19 PM »
Quote from: busaBuster on March 31, 2010, 07:27:19 PM
Quote from: Cookie on March 31, 2010, 07:20:53 PM
Quote from: Reverend Ron on March 31, 2010, 11:33:27 AM
Quote from: moparict on March 30, 2010, 10:33:29 PM
The aluminum 3-hole type links have a history of braking.


Don't want to hear that I have a 5 hole on mine
You have a 5 hole?  :hys:
shiiiiit now is a 1 hole link :hys:
Just be safe, Bro, number one!  :wink:
Logged
-Chris

גַּבְרִיאֵל guide me to the light ישוע המשיח

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #23 on: March 31, 2010, 07:40:49 PM »
this is how it sits now with the steel and so it did with the pingel


Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you

Offline busaBuster

  • Rider
  • ***
  • Posts: 250
  • [URL=http://s266.photobucket.com/albums/ii243/mike
Re: so i did the strut ....guess what
« Reply #24 on: March 31, 2010, 07:52:12 PM »
Logged
Horsepower is how fast you hit a wall, Torque is how far you take the wall with you
Pages: [1] 2  All   Go Up
« previous next »