Haybusa Parts and Service Member Support

Author Topic: RCC Stage II Turbo B King  (Read 13086 times)

Offline THEMOTORHEAD

  • Banned
  • Restricted
  • Post Master
  • *****
  • Posts: 1581
  • Gender: Male
Re: RCC Stage II Turbo B King
« Reply #25 on: May 02, 2010, 09:20:28 AM »
yup more than 11 psi imo but congrats either way

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #26 on: May 02, 2010, 10:10:07 AM »
Do you think it could have that boost creep guys talk about? When I picked up the bike, the boost controller had 7psi programmed in it with the 4lb spring. I raised a brow when I looked at the sheet, because that definitely seems like a high number for 11lb of boost.
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15348
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #27 on: May 28, 2010, 12:06:58 PM »
to me seems high as well, my bike on same dyno i think was 315-320 ish at 14 psi
Official Site Supporter

www.boostbysmith.com

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #28 on: May 29, 2010, 07:51:27 AM »
Was that with a stage 2 set up?
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15348
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #29 on: May 29, 2010, 08:27:48 AM »
Same turbo as you ecu controlling all fueling
Official Site Supporter

www.boostbysmith.com

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #30 on: May 29, 2010, 03:59:18 PM »
That makes it sound like either his dyno is WAY off, or it was making more than 11 lbs of boost. How or what would cause it to make more boost than whats programmed into the AMS-1000?
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline caddylt1

  • Post Whore
  • ****
  • Posts: 709
  • Gender: Male
  • "Its not the tires screaming, its the tarmac"
    • GarageSpec Magazine
Re: RCC Stage II Turbo B King
« Reply #31 on: July 10, 2011, 09:56:40 AM »
power sounds high for 11 lbs.  But then again, Ryan knows what hes doing for sure....If everything is in fact correct, that thing makes a lot of power.  My turbo makes about 330 at 14 lbs....
Gen I Turbo/Intercooled
RCC Turbo/MCXpress Intercooler
Fab and Tuned by Williford Racing
Head by Port Tech
Hays T3 Convertible
64 inch wheelbase
8 Second "kinda" Streekbike

Offline TrickTom1

  • HOT ROD
  • Site Donor
  • Post Apocalyptic Whore
  • *
  • Posts: 10065
  • Gender: Male
  • In God We Trust
Re: RCC Stage II Turbo B King
« Reply #32 on: March 06, 2012, 05:22:38 AM »
Good looking bike 

Offline Busacraver

  • Post Master
  • *****
  • Posts: 1251
Re: RCC Stage II Turbo B King
« Reply #33 on: May 13, 2015, 06:12:38 AM »
I still absolutely love this bike