Haybusa Parts and Service Member Support

Author Topic: RCC Stage II Turbo B King  (Read 34172 times)

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
RCC Stage II Turbo B King
« on: April 04, 2010, 08:47:30 PM »
I'm finally taking the B up to Schnitz tomorrow morning to get it tuned on the dyno. I'll pass along the numbers and how everything went when I get back in town. Wish me luck!!!!
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: RCC Stage II Turbo B King
« Reply #1 on: April 05, 2010, 09:10:05 AM »
Can't wait to hear your numbers you get. Good luck!
2008 Busa

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #2 on: April 05, 2010, 09:12:26 AM »
cool, have fun, what boost levels are you tuning up to?

Going there friday to play with my 08 turbo as well  :thumb:
Official Site Supporter

www.boostbysmith.com

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: RCC Stage II Turbo B King
« Reply #3 on: April 05, 2010, 07:24:08 PM »
cool, have fun, what boost levels are you tuning up to?

Going there friday to play with my 08 turbo as well  :thumb:

and yo dont call i see how it is =)

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #4 on: April 05, 2010, 07:25:58 PM »
cool, have fun, what boost levels are you tuning up to?

Going there friday to play with my 08 turbo as well  :thumb:

and yo dont call i see how it is =)

aint heard from ya in a while, doing alright?  Get anywhere with yours yet?
Official Site Supporter

www.boostbysmith.com

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: RCC Stage II Turbo B King
« Reply #5 on: April 05, 2010, 07:28:42 PM »
cool, have fun, what boost levels are you tuning up to?

Going there friday to play with my 08 turbo as well  :thumb:

and yo dont call i see how it is =)

aint heard from ya in a while, doing alright?  Get anywhere with yours yet?

Been building everyones shit  got my 08 1k done  just neeed some dyno time you make a ecu editer yet fo a 07-08 gsxr 1000 yet? the busa will hope to be done  by next month =)

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #6 on: April 05, 2010, 07:40:34 PM »
DAMN IT!!!!! We had to abort the mission because the Microtech box won't send a signal to the secondary injectors. I had to leave the bike there so Ryan can get with Richard and figure out a fix. It sucks, but Richard and Ryan Schnitz are top notch professional's and we'll get it sorted out. The boost controller is programmed and everything else looks good, so when the box is fixed he should get it done quick. For those of you that don't know Ryan Schnitz or his skills with a dyno, this is my 2nd turbo bike I've had him tune, and when it leaves his shop it's perfect! He's good. Oh yeah, he flashed the ECM, too.
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: RCC Stage II Turbo B King
« Reply #7 on: April 05, 2010, 07:41:35 PM »
DAMN IT!!!!! We had to abort the mission because the Microtech box won't send a signal to the secondary injectors. I had to leave the bike there so Ryan can get with Richard and figure out a fix. It sucks, but Richard and Ryan Schnitz are top notch professional's and we'll get it sorted out. The boost controller is programmed and everything else looks good, so when the box is fixed he should get it done quick. For those of you that don't know Ryan Schnitz or his skills with a dyno, this is my 2nd turbo bike I've had him tune, and when it leaves his shop it's perfect! He's good.

Ryan is a stand up guy for sure :thumb:

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: RCC Stage II Turbo B King
« Reply #8 on: April 13, 2010, 07:18:30 PM »
let us know what happens...  :thumb:
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #9 on: April 15, 2010, 03:01:29 PM »
Ok, I got my bike back today. There was nothing wrong with the Microtech box. Ryan told me Richard told him to put some air to it and it started working fine. Anyhow, it's finished and running good. Ryan only took it up to 11 psi and it made 330 HP and I think 179 TQ. There's plenty more left in it. So, overall, I'm very pleased with Richards kit, his tech support is awesome, and Ryan did a fantastic job with my bike, AGAIN!! I suck at posting pics, so bare with me in the next couple days I'll try to post the dyno sheet.
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: RCC Stage II Turbo B King
« Reply #10 on: April 15, 2010, 03:06:33 PM »
good job  :thumb: make sure you post pics of the bike also.. if you need help with that , just email me the pics and I will post them for you....  Jody

nickelcityracing@persona.ca
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #11 on: April 15, 2010, 03:15:10 PM »
I'll take you up on that. I can build a turbo bike, but I can't post a picture. Am I sorry or what?!?! :?
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: RCC Stage II Turbo B King
« Reply #12 on: April 15, 2010, 03:22:06 PM »
no problem, I have a Bking also and would love to turbo it , but can only afford one turbo bike at a time.... ultra turbo busa it is for know....  :vl:
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #13 on: April 15, 2010, 03:22:42 PM »
It looked sweet when i saw it, nice mounting of ams1000 and boost gauge  :thumb:
Official Site Supporter

www.boostbysmith.com

Offline Bently1

  • Post Master
  • *****
  • Posts: 1545
  • Gender: Male
Re: RCC Stage II Turbo B King
« Reply #14 on: April 17, 2010, 06:49:23 AM »
I bet the B-king with it up right seating position would be fun as hell with that much power.
2008 Busa

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: RCC Stage II Turbo B King
« Reply #15 on: April 26, 2010, 02:49:15 PM »
here is his bike....



Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: RCC Stage II Turbo B King
« Reply #16 on: April 26, 2010, 02:52:35 PM »
looks killer, black out the rearsets, dum pipes, etc and it would look sinister  :twisted:

how's she ride?
Official Site Supporter

www.boostbysmith.com

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #17 on: April 27, 2010, 08:35:46 PM »
It rides very nice. Funny you should mention blacking out those pieces. I just got introduced to a local powdercoater last week. The first thing I will black out is the chrome dash piece on the tank. What were they thinking with that? Is it just me or has anybody else had bad sun glare from that thing?
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #18 on: April 27, 2010, 08:43:30 PM »
Jody.

Thanks for posting those pictures for me.

Johnny D.
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: RCC Stage II Turbo B King
« Reply #19 on: April 27, 2010, 09:07:58 PM »
no problem, i am jealous of your b king.... hope to turbo mine some day....
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods

Offline ACE23

  • Mad Post Whore
  • ******
  • Posts: 2081
Re: RCC Stage II Turbo B King
« Reply #20 on: April 29, 2010, 01:20:15 PM »
Ok, I got my bike back today. There was nothing wrong with the Microtech box. Ryan told me Richard told him to put some air to it and it started working fine. Anyhow, it's finished and running good. Ryan only took it up to 11 psi and it made 330 HP and I think 179 TQ. There's plenty more left in it. So, overall, I'm very pleased with Richards kit, his tech support is awesome, and Ryan did a fantastic job with my bike, AGAIN!! I suck at posting pics, so bare with me in the next couple days I'll try to post the dyno sheet.
wow 330HP is usually what you see from a stage 2 busa on 15-16lb. Do you have any motor work done?
RCC SUPER ULTRA
Race fuel=XXXHP / XXXTQ
93 oct= XXXHP / XXXTQ
Motor by Cooper Performance
Tranny by R&D
Controlled by NLR
Monitored by AEM
Resurrected by Murderedout
Tuned by "........"
=Youtube Interstate Pulls

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #21 on: April 29, 2010, 03:27:02 PM »
The motor has Wossner rods and pistons, SS valves with 65lb. springs, studs, lock up clutch. I thought that sounded high too but he showed me on the boost controller he had 7lbs. with the 4lb. spring in the wastegate running C-16.
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline dadofthree

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1719
  • Gender: Male
Re: RCC Stage II Turbo B King
« Reply #22 on: April 29, 2010, 03:36:21 PM »
Nice Boost King  :thumb:

Offline JohnnyBKing

  • Rider
  • ***
  • Posts: 56
Re: RCC Stage II Turbo B King
« Reply #23 on: April 29, 2010, 07:27:17 PM »
Thank you!!
2008 B King, RCC stage II Turbo, Wossner Rods And Pistons, SS Valves W/65lb. Springs, Studs And All The Other Goodies, AMS-1000

Offline ACE23

  • Mad Post Whore
  • ******
  • Posts: 2081
Re: RCC Stage II Turbo B King
« Reply #24 on: April 30, 2010, 07:23:27 AM »
The motor has Wossner rods and pistons, SS valves with 65lb. springs, studs, lock up clutch. I thought that sounded high too but he showed me on the boost controller he had 7lbs. with the 4lb. spring in the wastegate running C-16.
yeah not to take anything away from your numbers thats why I was wondering if you head cams and some headwork done. So many of these dynos are 20Hp different its not even funny. I bet your bike makes good power though and just as much as any other turbo bike thats built the same :thumb:
RCC SUPER ULTRA
Race fuel=XXXHP / XXXTQ
93 oct= XXXHP / XXXTQ
Motor by Cooper Performance
Tranny by R&D
Controlled by NLR
Monitored by AEM
Resurrected by Murderedout
Tuned by "........"
=Youtube Interstate Pulls