Schnitz Racing makes a fan switch for the 99-07 Busa HERE
In their installation instructions your told to de-pin the stock connector and cover the leads with shrink wrap insert the two leads into the plug and use rtv silicone to secure them.
I thought that wasnt a very good idea so I used a plug from a 0BD1 Honda civic engine harness but any 0BD1 Honda Car harness would have at least one of these plugs present. stock connector, old sensorNew sensor installed, new connecternice secure fit just like OEM...
took me all of 20 minutes to do this trick...Fairing shots for you guys wanting them