Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Need help with ECU connector  (Read 3057 times)

Offline bikefrk

  • Post Whore
  • ****
  • Posts: 987
  • WestSide,Mi
Need help with ECU connector
« on: August 21, 2010, 06:27:49 PM »
When removing all my nitrous gear from my 2008 Busa, the wire that the solenoid relay taps into came out of the gray ecu connector.

When I slide it back in, it will not stay. Is there a tab I broke off? Am I missing a simple fix?

I don't know why it came out, but it did.

I have already removed the orange piece from the connector on smithabusas's suggestion, but see nothing in there to help me out.

Logged

Offline Got-Busa?

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3023
  • Gender: Male
Re: Need help with ECU connector
« Reply #1 on: August 22, 2010, 08:27:22 AM »
Make sure it is going in the correct way and it should click into place.  If it's not in the right way it won't click and lock in... ;)
Logged
CLICK-->  *Got-Busa's "STREET BIKE"-project* <--CLICK
"WILMINGTON MILE" - 212.7 MPH!
"ARKANSAS 1/2 MILE" - 202.566 MPH!
"ARKANSAS 2KM" 232.919 MPH!
THANK YOU SHANE STUBBS @ STPI
"TEXAS MILE" -182.265 MPH stock --204.468 MPH "Brock's Performance" basic mods -- 227.2 MPH "RCC TURBO" low boost/half naked!

Offline bikefrk

  • Post Whore
  • ****
  • Posts: 987
  • WestSide,Mi
Re: Need help with ECU connector
« Reply #2 on: August 22, 2010, 10:37:03 AM »
I have tried it every possible way.

That is why I ask if it has a little metal tab I might have broken when it came out, or do I have to bend something back etc...???

I got a look at it with the magnifying glass and I don't see anything.
Logged
Pages: [1]   Go Up
« previous next »