Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Factory Shift light  (Read 3820 times)

Offline C-Nyl

  • Rider
  • ***
  • Posts: 110
  • Gender: Male
  • HD Quad
Factory Shift light
« on: September 03, 2010, 03:31:43 PM »
When does the factory shift light suppose to come (@ what rpm)? :grn: Or do I haft to manually turn it on and adjust it to the desired rpm? :?: :shock:
Logged
C-Nyl

Offline BLU88

  • Post Master
  • *****
  • Posts: 1657
  • Gender: Male
  • "Ride it hard or dont ride it"
    • ccpowersports
Re: Factory Shift light
« Reply #1 on: September 03, 2010, 05:59:29 PM »
you have to make sure it is on and then set it at the rpm u want it to come on...  :thumb:
Logged
2013  black "throat punch racing"
2008  gray and black. (Sold)
2002 black n blue.(sold)

Offline C-Nyl

  • Rider
  • ***
  • Posts: 110
  • Gender: Male
  • HD Quad
Re: Factory Shift light
« Reply #2 on: September 03, 2010, 11:08:19 PM »
Quote from: BLU88 on September 03, 2010, 05:59:29 PM
you have to make sure it is on and then set it at the rpm u want it to come on...  :thumb:

Thanks, I figured it out. In the manual it dosent say that the on/off switch hast to be on to change it. It just says hold down select button and turn ignition on... But I finally got it...
Logged
C-Nyl

Offline 8secbusa

  • Rider
  • ***
  • Posts: 46
Re: Factory Shift light
« Reply #3 on: September 04, 2010, 05:09:55 AM »
Keep in mind, the factory tach snd shift light is not very accurate. On my 08 its off by 700rpm, my 09 500 rpm. This we verified on the dyno using the coil wire.

11,000 on the tach was 10300 or 10500 respectively.
Logged

Offline C-Nyl

  • Rider
  • ***
  • Posts: 110
  • Gender: Male
  • HD Quad
Re: Factory Shift light
« Reply #4 on: September 05, 2010, 05:43:29 PM »
Quote from: 8secbusa on September 04, 2010, 05:09:55 AM
Keep in mind, the factory tach snd shift light is not very accurate. On my 08 its off by 700rpm, my 09 500 rpm. This we verified on the dyno using the coil wire.

11,000 on the tach was 10300 or 10500 respectively.

Ok, thanks for the heads up... I have my 09 set at 8500 rite now. Im still in the break in stage (132 miles on it)
Logged
C-Nyl
Pages: [1]   Go Up
« previous next »