Haybusa Parts and Service Member Support

Author Topic: iaps and aps questions  (Read 3295 times)

Offline aaronxs400

  • Rider
  • ***
  • Posts: 33
iaps and aps questions
« on: November 04, 2010, 07:31:45 PM »
ok so the way i understand it is the ECU reads the ambient air pressure through the APS located in the frame, and the Inlet air pressure through the IAPS which has vacuum lines running to the 4 throttle bodies.

it reads these two sensors and does a calculation and does something to alter the fuel, correct?

i have heard the IAPS is only used for below 10% throttle for idling and low speed stuff.

does anyone know what the value ranges are for these two sensors?

the way i understand it is they are potentiometers that run off of pressure, is that correct?

thanks a million guys.

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: iaps and aps questions
« Reply #1 on: November 04, 2010, 07:37:07 PM »
This was a comparison I did between a DL-32 onboard sensor, a stock suzuki IAP, and an SSI 5 bar sensor (SAP is same as IAP)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning