How to soften the hit???Need some help??

[gsxrdan]

Just looking for some info on how to make a dry shot come on soft without a controller.I am planning to run a class that allows 1 stage,1 solenoid,4 nozzles,but no controllers.Just wot switches.The class is based on real street rules.Oh yeah it's a full weight 63" gsxr 1000.I  am thinking of useing my current spray bar with an extra long line between the bar and the solenoid.
Thanks
Dan

[boofoo]

Longer line from solenoid to injection point seems to soften it. Also moving the injection point further away seems to soften it.

[gsxrdan]

Thanks,I may go back to dual nozzles.It hit hard with the 80 shot with the bar.I'm figureing to only spray a 40 shot without a good controller@ 63"

[wildphil69]

inject it with a single nozzle into teh airbox

[gsxrdan]

I am not sure about the distribution with 1 nozzle...I used 2 nozzels before,have you been useing just one nozzle???

[boofoo]

inject it with a single nozzle into teh airbox

+1
that's the set up I'm running and it isn't violent at all, actually a little too soft IMO.

[FlatlandBusa]

Longer line from solenoid to injection point seems to soften it. Also moving the injection point further away seems to soften it.

+1

[wildphil69]

alao of people spray it in where the flapper actuator used to be through the air filter

[gsxrdan]

Thanks guys looks like there are a few options.