Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: ecueditor.com for K7- gixxers  (Read 72776 times)

Offline PetriK

  • ECU Guru
  • Post Master
  • *****
  • Posts: 1035
  • Gender: Male
  • Where am I?
ecueditor.com for K7- gixxers
« on: December 31, 2010, 11:55:59 AM »
Happy 2011 new year for everyone ...

First trials with gixxer ecu proved to be somewhat succesful... for more info please see below...

Fuelmap tuning... including MS0/MS1 maps for e.g. nitrous use


Setting Limiters, removing top speed limiter


Ignition map tuning, different MS0/MS1 maps for e.g. nitrous or race fuel


Edit - Lets add that also enginedata is working with gixxers showing all error codes from memory or run time as well as ability to monitor all key sensors when dynoing the bike.


Install as for Hayabusa from http://www.ecueditor.com

« Last Edit: December 31, 2010, 12:48:02 PM by PetriK »
Logged

Offline PetriK

  • ECU Guru
  • Post Master
  • *****
  • Posts: 1035
  • Gender: Male
  • Where am I?
Re: ecueditor.com for K7- gixxers
« Reply #1 on: January 01, 2011, 11:13:58 AM »
For those who are interested, the DIY interface is same as busa - here is the wiring diagram.

http://www.ecueditor.com/interface.jpg

And here is the link on tuning forum where this is discussed more in detail.

http://www.suzukihayabusa.org/forum/index.php?topic=140589.0
« Last Edit: January 07, 2011, 12:45:17 AM by PetriK »
Logged

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #2 on: January 01, 2011, 12:33:08 PM »
Petrik  you never cease to amaze us  :tu:
Logged
Official Site Supporter

www.boostbysmith.com

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #3 on: January 01, 2011, 12:39:41 PM »
I would like to offer a FREE ECU flasher setup for K7-K8 GSXR1000 for someone who could quickly start testing it, provide photos of install, and provide feedback etc.  I would ask for a deposit which I would refund once some photos, feedback etc came back.  Let me know if interested, need to have understanding of tuning, computers, and wiring, but should be fairly easy.  Please don't respond if it wouldn't be touched for several weeks due to bike being apart, etc that type of thing.

Greg
Logged
Official Site Supporter

www.boostbysmith.com

Offline murderedout07

  • Mad Post Whore
  • ******
  • Posts: 3329
  • Gender: Male
Re: ecueditor.com for K7- gixxers
« Reply #4 on: January 02, 2011, 01:50:11 AM »
Very cool! Is this going to be able to do boost fueling like the gen2 busas, since they have a second row of injectors?
Logged

TURBOLAG: The split second the other guy thinks hes winning.

Offline PetriK

  • ECU Guru
  • Post Master
  • *****
  • Posts: 1035
  • Gender: Male
  • Where am I?
Re: ecueditor.com for K7- gixxers
« Reply #5 on: January 02, 2011, 02:50:01 AM »
Quote from: murderedout07 on January 02, 2011, 01:50:11 AM
Very cool! Is this going to be able to do boost fueling like the gen2 busas, since they have a second row of injectors?

Boosfuel module is in the plans, .i.e. requested by some locals. That is why I am doing this. Anyway it may take some time before boostfuel is out there.

First step is to confirm that everything we today have works.
Logged

Offline FastazzR1

  • Rider
  • ***
  • Posts: 35
Re: ecueditor.com for K7- gixxers
« Reply #6 on: January 02, 2011, 04:22:42 AM »
can i upgrade my 05-06 1000 ecu to the 07-08 1000 ecu?
Logged

Offline PetriK

  • ECU Guru
  • Post Master
  • *****
  • Posts: 1035
  • Gender: Male
  • Where am I?
Re: ecueditor.com for K7- gixxers
« Reply #7 on: January 02, 2011, 04:30:54 AM »
Quote from: FastazzR1 on January 02, 2011, 04:22:42 AM
can i upgrade my 05-06 1000 ecu to the 07-08 1000 ecu?

Connectors are somewhat different - anyhow believe or not but K8 or newer busa / bking ecu is almost a direct plugin to K5-K6 gixxer. No one has just not tested that.
Logged

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
Re: ecueditor.com for K7- gixxers
« Reply #8 on: January 02, 2011, 07:22:04 AM »
awesome! will this also work on a 600?
Logged
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4319
  • Gender: Male
Re: ecueditor.com for K7- gixxers
« Reply #9 on: January 02, 2011, 09:06:20 AM »
Great job PetriK  :thumb: :thumb: :thumb:
Logged
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013

Offline Birdman

  • SITE SPONSOR
  • Rider
  • *****
  • Posts: 107
    • RC's Performance
Re: ecueditor.com for K7- gixxers
« Reply #10 on: January 02, 2011, 03:38:18 PM »
Would be great to be able to disable ISC valve, many K7's have had problems here.
Logged
OFFICIAL SITE SPONSOR


RC's Performance
www.rcsperformanceonline.com/

Offline gsx-rboy750

  • Authorized Shop
  • Post Master
  • **
  • Posts: 1721
  • Ok. So sometime I can be a little full of myself.
Re: ecueditor.com for K7- gixxers
« Reply #11 on: January 02, 2011, 07:32:44 PM »
Quote from: PetriK on January 02, 2011, 04:30:54 AM
Quote from: FastazzR1 on January 02, 2011, 04:22:42 AM
can i upgrade my 05-06 1000 ecu to the 07-08 1000 ecu?

Connectors are somewhat different - anyhow believe or not but K8 or newer busa / bking ecu is almost a direct plugin to K5-K6 gixxer. No one has just not tested that.


Petrik I know the 06 750 Might be different but the wiring is essentally the same, how far away is the software  away from use on my gixxer. I know the defs might differ. I have read alot of your posts on this and the hacking site.
Logged

Offline gsx-rboy750

  • Authorized Shop
  • Post Master
  • **
  • Posts: 1721
  • Ok. So sometime I can be a little full of myself.
Re: ecueditor.com for K7- gixxers
« Reply #12 on: January 02, 2011, 07:35:57 PM »
Quote from: smithabusa on January 01, 2011, 12:39:41 PM
I would like to offer a FREE ECU flasher setup for K7-K8 GSXR1000 for someone who could quickly start testing it, provide photos of install, and provide feedback etc.  I would ask for a deposit which I would refund once some photos, feedback etc came back.  Let me know if interested, need to have understanding of tuning, computers, and wiring, but should be fairly easy.  Please don't respond if it wouldn't be touched for several weeks due to bike being apart, etc that type of thing.

Greg


what about on a 06-07 750 once it gets figured publicly?
Logged

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: ecueditor.com for K7- gixxers
« Reply #13 on: January 02, 2011, 08:32:58 PM »
 :bike: Nick I have a Bike  Let me know  :wink: it make 180 hp on ryans dyno with a bazzaz box
Logged

Offline gixxted

  • Rider
  • ***
  • Posts: 22
Re: ecueditor.com for K7- gixxers
« Reply #14 on: January 03, 2011, 04:09:29 PM »
Hi, was following this on the other site ,before it was removed,
i have a boost by smith flasher for gen 1 busa, can this be converted to be used with the k7 1000 ?
again great work petrick !
thanks in advance.
Logged

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: ecueditor.com for K7- gixxers
« Reply #15 on: January 03, 2011, 04:23:05 PM »
Quote from: gixxted on January 03, 2011, 04:09:29 PM
Hi, was following this on the other site ,before it was removed,
i have a boost by smith flasher for gen 1 busa, can this be converted to be used with the k7 1000 ?
again great work petrick !
thanks in advance.

What site was it removed from?

Yes, you should be able to re-pin the flasher.
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #16 on: January 03, 2011, 04:33:58 PM »
you will need a gen 2 busa flasher, and nothing has to be changed except the 2 ecu pin locations on the 1000 harness are different.

it was on gixxer.com and got removed, i signed up as a vendor there today, need to get some info posted
Logged
Official Site Supporter

www.boostbysmith.com

Offline gixxted

  • Rider
  • ***
  • Posts: 22
Re: ecueditor.com for K7- gixxers
« Reply #17 on: January 03, 2011, 04:39:02 PM »
Ok ,thanks for reply, will go an order the gen 2 flasher now.
 :)
Logged

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #18 on: January 03, 2011, 04:42:02 PM »
no one has actually flashed on with it yet, looking for a user who could provide quick feedback and i will refund the purchase price :) 
Logged
Official Site Supporter

www.boostbysmith.com

Offline gixxted

  • Rider
  • ***
  • Posts: 22
Re: ecueditor.com for K7- gixxers
« Reply #19 on: January 03, 2011, 04:48:24 PM »
i have just ordered & paid with paypal, i am in australia, as soon as i get it ,will try it out.
looking to lift rpm limits to start with, then if ignition maps per gear is available, would like to test that.
Logged

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #20 on: January 03, 2011, 06:15:20 PM »
Quote from: 469 Boy*Robert Kelly on January 02, 2011, 08:32:58 PM
:bike: Nick I have a Bike  Let me know  :wink: it make 180 hp on ryans dyno with a bazzaz box

Rob, let me know if you would like to try flashing on the 1000, ill see if i can set something up with Ryan on dyno costs etc for me to cover.
Greg
Logged
Official Site Supporter

www.boostbysmith.com

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Re: ecueditor.com for K7- gixxers
« Reply #21 on: January 05, 2011, 08:50:05 PM »
Quote from: smithabusa on January 03, 2011, 06:15:20 PM
Quote from: 469 Boy*Robert Kelly on January 02, 2011, 08:32:58 PM
:bike: Nick I have a Bike  Let me know  :wink: it make 180 hp on ryans dyno with a bazzaz box

Rob, let me know if you would like to try flashing on the 1000, ill see if i can set something up with Ryan on dyno costs etc for me to cover.
Greg

LMAO I called you Nick WTF was i thinking?
Logged

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #22 on: January 08, 2011, 09:26:19 AM »
Logged
Official Site Supporter

www.boostbysmith.com

Offline atticdog

  • Post Master
  • *****
  • Posts: 1955
  • RIP DaveO my friend
Re: ecueditor.com for K7- gixxers
« Reply #23 on: January 08, 2011, 10:49:37 AM »
greg will this also work on an 08 gsxr 600?
Logged
01 Black/Silver,08 GSXR fork/wheels, Pyramid DB, Corbin seat, gsxr1K footpegs, spedo healer, PCIII USB, 6 over Trac arm and Boosted!!

Offline smithabusa

  • Boost By Smith
  • Site Supporter
  • Post Apocalyptic Whore
  • ****
  • Posts: 15353
  • Gender: Male
    • Boost By Smith
Re: ecueditor.com for K7- gixxers
« Reply #24 on: January 08, 2011, 11:10:17 AM »
no its for 07-08 gsxr1000
Logged
Official Site Supporter

www.boostbysmith.com
Pages: [1] 2 3 4   Go Up
« previous next »