Update
07 gix 1000 cam sensor interchanges with the earlier sensors for fit , and gen 1 busa. the gen 2 busa and gix 750/600 of similar age run a different cam sensor , so anyone retrofitting can use the 07 gix 1000 sensor.
The 06 gix loom and 08 busa ecu work good on my gen 1 busa (setup with the gen 2 cam sensor and cover before i realised the gix would have been cheaper and easier)
the same loom and ecu do not work on my gix.
The 07 gix loom and ecu with busa .bin does work on my earlier gix when the cam sensor is fitted
So personally now i would not modify a 06 gix loom to use a busa ecu, to use the busa ecu on a busa get a busa loom .. and to get the same functionality on a gix get the gix ecu and loom and use the busa .bin .
posted similar on the 1000 section .
Last night I finished the following
orginal bike 06-07 gsxr 750 with turbo
-wired with a 08-09 gsxr 750 wiring harness
-running a 07-08 gsxr 1000 ecu
- running 08busa ecu editor, flashed with 08 Busa bin with 08-09 750 ign, fuel maps pasted and reflashed.
It fucking started and purred like a fucking champ!!!!
I am having problems with engine data. It says com port is not setup, however I was able to flash at least 3 times no problem.
I also would like to know e actly how people are wiring in their wideband dirrectly to the stock o2 harness wiring.
Thank you will post video later.