Author Topic: 2 turbo projects this winter (Read 70854 times) Tweet

nickelcityracing · « **Reply #75 on:** March 04, 2011, 03:57:44 PM »

more powder coating, turbo plentium, brackets, oil pan, top clamp, harley dash and fuel door

Canadian Mike · « **Reply #76 on:** March 05, 2011, 08:27:06 PM »

Kurt · « **Reply #77 on:** March 05, 2011, 08:46:44 PM »

looks nice and clean

nickelcityracing · « **Reply #78 on:** March 06, 2011, 09:06:41 AM »

a little more work done, drill a 3/4" hole in oil pan, install an fitting...

installed new stator cover, powder coated and lights up also....

TrickTom1 · « **Reply #79 on:** March 06, 2011, 11:24:18 AM »

Simple and clean, easy to build too after what you've already built, should be a great bang for the buck and fun to ride

nickelcityracing · « **Reply #80 on:** March 06, 2011, 01:23:28 PM »

thats what we want, cheap build, good looks and fun as hell with no worries....

nickelcityracing · « **Reply #81 on:** March 07, 2011, 01:23:00 PM »

wheels stripped and off to the powder coaters, my operation is a little too small for the rims, it would be a thight fit...

nickelcityracing · « **Reply #82 on:** March 07, 2011, 01:23:53 PM »

they will be gun metal grey glimer with a coat of clear... Jody

Mike-Nightrider · « **Reply #83 on:** March 07, 2011, 02:07:07 PM »

Big Boost 1 · « **Reply #84 on:** March 18, 2011, 11:35:35 PM »

I cant wait to see that harley. I just got sold my busa . And would love to do that to a street glide.

nickelcityracing · « **Reply #85 on:** March 19, 2011, 04:49:18 AM »

Quote from: Big Boost 1 on March 18, 2011, 11:35:35 PM

I cant wait to see that harley. I just got sold my busa . And would love to do that to a street glide.

Richard is working on it, I will get pics from him soon...

nickelcityracing · « **Reply #86 on:** March 29, 2011, 08:37:13 PM »

new pics and updates coming soon, just getting ready to go to Maxton this weekend, not much time to work on the bike....

TrickTom1 · « **Reply #87 on:** March 30, 2011, 06:04:18 AM »

Quote from: nickelcityracing on March 29, 2011, 08:37:13 PM

new pics and updates coming soon, just getting ready to go to Maxton this weekend, not much time to work on the bike....

nickelcityracing · « **Reply #88 on:** April 07, 2011, 03:26:37 PM »

got the rims back from powder coaters, put new bridgestone 002rs's on

got my new rotors in, these are nice, these are for gen1, I had ordered the wrong ones but sold them on here last week

pazzo chinese knock offs, cant tell them apart...

galfer all black lines. brakes and clutch...

zrxdean · « **Reply #89 on:** April 07, 2011, 04:29:01 PM »

Looking good

Mike-Nightrider · « **Reply #90 on:** April 07, 2011, 04:38:09 PM »

Quote from: zrxdean on April 07, 2011, 04:29:01 PM

Looking good

wildphil69 · « **Reply #91 on:** April 08, 2011, 08:55:34 AM »

i ran those chineese knock offs on my bike they are pretty nice!

nickelcityracing · « **Reply #92 on:** April 08, 2011, 03:11:00 PM »

ran more wiring, fuel lines, and vaccuum lines, also installed fuel pump and fuel regulator

installed plenum and up pipes

TrickTom1 · « **Reply #93 on:** April 09, 2011, 05:16:58 PM »

nickelcityracing · « **Reply #94 on:** April 11, 2011, 06:47:08 PM »

I did not realise there was a difference in wiring harnesses. The motor I got was a 2007, so is the harness. The rest of the bike is 2003, I plugged everything in and when I turn the key on, the right flasher was on instead of the headlight, when you put the flashers on the headlight flashes.... weird, Once I closely inspected my old cut up harness and compaired it to my new 2007 one, the pins in some of the plugs are not the same, the amount of wires is also different.... now I am looking for 2007 controls I guess ...???? anyone else run into this....

BATTMAN · « **Reply #95 on:** April 11, 2011, 06:51:47 PM »

I did the same thing. The newer handle bar controls have extra wires for the 4 way flashers.

nickelcityracing · « **Reply #96 on:** April 11, 2011, 07:08:32 PM »

thanks.... will look for the right ones.... when does the newer one start.... 2005 2006 I know 2007 has them

Got-Busa? · « **Reply #97 on:** April 12, 2011, 10:36:32 AM »

I believe 04 was the first year of the flasher/hazzard switch in the US not sure on Canadian bikes. US part # is: 37200-33E60 for the R handlebar switch.

murderedout07 · « **Reply #98 on:** April 12, 2011, 10:38:28 AM »

Quote from: Got-Busa? on April 12, 2011, 10:36:32 AM

I believe 04 was the first year of the flasher/hazzard switch in the US not sure on Canadian bikes. US part # is: 37200-33E60 for the R handlebar switch.

What a guy, part number and all.

nickelcityracing · « **Reply #99 on:** April 12, 2011, 08:21:32 PM »

thanks , found a set of 07 controls, I also found out that you can just re pin the plugs to match each other, a little work but that will work also..

News:

Author Topic: 2 turbo projects this winter (Read 70854 times) Tweet