Haybusa Parts and Service Member Support

Author Topic: ______Help pllz before I blow something up ;-)______  (Read 4639 times)

Offline __NATE__

  • Post Master
  • *****
  • Posts: 1784
  • Gender: Male
  • Corpus Christi Tx
______Help pllz before I blow something up ;-)______
« on: June 16, 2011, 04:40:10 PM »
Ok I bought a 4 nozzle fogger DRY kit and am installing it right now STOCK MOTOR no work done at all besides transmission.... The kit came with size 18 jet size witch cold fusion says is a 60 shot with 52 whp and I looked up 17 size jets and there a 52 shot with 44whp what should I do??
07 BLACK BUSA..
Don't lend out your wife or your bike, someone will throw a rod in either one of them...

Offline __NATE__

  • Post Master
  • *****
  • Posts: 1784
  • Gender: Male
  • Corpus Christi Tx
Re: ______Help pllz before I blow something up ;-)______
« Reply #1 on: June 17, 2011, 10:38:54 AM »
Bump....
07 BLACK BUSA..
Don't lend out your wife or your bike, someone will throw a rod in either one of them...

Offline 6002abusa

  • Rider
  • ***
  • Posts: 189
Re: ______Help pllz before I blow something up ;-)______
« Reply #2 on: June 17, 2011, 11:20:12 AM »
On my MPS Spider 16's are a 36hp shot and 18's are 48 hp. The spider uses 4 jets also

Offline __NATE__

  • Post Master
  • *****
  • Posts: 1784
  • Gender: Male
  • Corpus Christi Tx
Re: ______Help pllz before I blow something up ;-)______
« Reply #3 on: June 17, 2011, 03:04:29 PM »
Ty.. I was wanting to stay around a 50 to be safe but if these 18s end up being a 50to60 I am going to try it and see what my tuner says how the bike acts....
07 BLACK BUSA..
Don't lend out your wife or your bike, someone will throw a rod in either one of them...

Offline Ron Politically Incorrect

  • Post Master
  • *****
  • Posts: 1168
  • Gender: Male
  • Ron Dishop Silencers Dunnellon Fla 352-795-4511
Re: ______Help pllz before I blow something up ;-)______
« Reply #4 on: June 17, 2011, 03:45:28 PM »
Schnitz Racing Dry Nitrous Jetting and Recommendation Chart
 
*For Fuel Injected 4 Cylinder Motorcycles (one injector per cylinder) with Single Nitrous Jet.
 
Nitrous Jet Horsepower gain 600cc 750cc 1000cc 1300+cc Fuel % increase
14 6hp Stock Stock Stock Stock 3%
16 9hp Stock Stock Stock Stock 3%
18 12hp Stock Stock Stock Stock 5%
20 15hp Stock Stock Stock Stock 5%
22 17hp Stock Stock Stock Stock 8%
24 20hp Stock Stock Stock Stock 8%
26 25hp Stock Stock Stock Stock 10%
28 30hp Stock Stock Stock Stock 10%
30 34hp Mod Mod Stock Stock 12%
32 38hp Mod Mod Mod Stock 12%
34 40hp Mod Mod Mod Stock 15%
36 45hp Mod Mod Mod Stock 15%
38 50hp Mod Mod Mod Stock 17%
40 55hp Mod Mod Mod Mod 20%
42 65hp Mod Mod Mod Mod 22%
 

 
Stock - 93 Pump Gas, Stock Engine, Stock Timing
Mod - Engine Modifications Required (Pistons, Rods, Valves, Valve Springs)
Horsepower increases as measured at rear wheel.
Every 10 horsepower can reduce your 1/4 mile ET as much at .1 seconds or more.
This Chart is just a guideline.  There are may variables, such as nozzle type and distribution 
Note:  If your motorcycle has 8 injectors (2 per cylinder), you will need to increase fuel by 3 times that of the chart.  Example:  1000cc engine with 30 jet.  Chart for 1 injector per cylinder show to add 12% more fuel.  For an engine with 2 injectors per cylinder, 36% more fuel should be added.  This is just a guide.  Dyno tuning is the best way to ensure a safe fuel curve.

Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline __NATE__

  • Post Master
  • *****
  • Posts: 1784
  • Gender: Male
  • Corpus Christi Tx
Re: ______Help pllz before I blow something up ;-)______
« Reply #5 on: June 18, 2011, 04:21:02 AM »
Ty vm were almost done with the install.. Just got a few things I might have to call ole smithy on but it looks good...
07 BLACK BUSA..
Don't lend out your wife or your bike, someone will throw a rod in either one of them...