Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: ZX14 Clutches  (Read 4854 times)

Offline genarr3

  • Post Master
  • *****
  • Posts: 1891
  • Gender: Male
ZX14 Clutches
« on: July 19, 2011, 12:40:43 PM »
I've read people were getting ZX14 clutch sets to help with setting their particular stack height. Is it just the fiber sets or the steels also that offer different thicknesses?
« Last Edit: July 19, 2011, 08:59:41 PM by genarr3 »
Logged
Orient Express Top Street Bike 2011 Season Champ Englishtown NJ

Offline Cycle Concepts

  • Rider
  • ***
  • Posts: 326
  • Gender: Male
    • Cycle Concepts Racing
Re: ZX14 Clutches
« Reply #1 on: July 20, 2011, 11:15:56 AM »
The zx14 fibers aren't gonna offer any help but the steel plates will..the zx14 uses 2.6mm steels and the busa's use 2.0 and 2.3mm steels
Logged

Offline genarr3

  • Post Master
  • *****
  • Posts: 1891
  • Gender: Male
Re: ZX14 Clutches
« Reply #2 on: July 20, 2011, 12:33:08 PM »
Quote from: Cycle Concepts on July 20, 2011, 11:15:56 AM
The zx14 fibers aren't gonna offer any help but the steel plates will..the zx14 uses 2.6mm steels and the busa's use 2.0 and 2.3mm steels
Just so I'm clear on this the ZX14 fibers are the same as a Hayabusa? They just won't offer any additional thickness that you would get with a Busa set. They can be used?
Thanks.
Logged
Orient Express Top Street Bike 2011 Season Champ Englishtown NJ

Offline Cycle Concepts

  • Rider
  • ***
  • Posts: 326
  • Gender: Male
    • Cycle Concepts Racing
Re: ZX14 Clutches
« Reply #3 on: July 20, 2011, 05:47:17 PM »
Quote from: genarr3 on July 20, 2011, 12:33:08 PM
Quote from: Cycle Concepts on July 20, 2011, 11:15:56 AM
The zx14 fibers aren't gonna offer any help but the steel plates will..the zx14 uses 2.6mm steels and the busa's use 2.0 and 2.3mm steels
Just so I'm clear on this the ZX14 fibers are the same as a Hayabusa? They just won't offer any additional thickness that you would get with a Busa set. They can be used?
Thanks.

Hayabusa and ZX14 odd fiber measures 3.8mm roughly
Hayabusa 8 thin fibers measure 3.0mm roughly
ZX14 remaining 9 fibers all measure 3.0mm roughly
Hayabusa big fiber measures 3.8mm roughly

So using ZX14 fibers with hayabusa steels will not get you any more than using hayabusa fibers..Now using busa fibers and zx14 steels can get you real tall stack heights..stock busa stack height is 1.985'ish and a stock zx14 stack height is 2.15'ish
Logged

Offline genarr3

  • Post Master
  • *****
  • Posts: 1891
  • Gender: Male
Re: ZX14 Clutches
« Reply #4 on: July 20, 2011, 10:44:52 PM »
Thanks for taking the time, that's great information and is exactly what I was trying to find out.
Logged
Orient Express Top Street Bike 2011 Season Champ Englishtown NJ

Offline glenn71

  • Post Master
  • *****
  • Posts: 1102
  • Gen 1 stock length allmotor tragic
Re: ZX14 Clutches
« Reply #5 on: July 21, 2011, 08:43:06 AM »
Are the zx14 steels less likely to warp because their
Thicker?
Logged
Gen1 the original and the best
8.76@165.42mph so far

Offline Cycle Concepts

  • Rider
  • ***
  • Posts: 326
  • Gender: Male
    • Cycle Concepts Racing
Re: ZX14 Clutches
« Reply #6 on: July 21, 2011, 03:55:06 PM »
Quote from: glenn71 on July 21, 2011, 08:43:06 AM
Are the zx14 steels less likely to warp because their
Thicker?

yes...
Logged
Pages: [1]   Go Up
« previous next »