Haybusa Parts and Service Member Support

Author Topic: Ti valves and Nitrous  (Read 6628 times)

Offline California Kid

  • Rider
  • ***
  • Posts: 313
    • Bills Landspeed Racing
Ti valves and Nitrous
« on: December 07, 2011, 01:09:35 PM »
           I have a Gen 2  Has anybody tried using the Ti valves and change the valve springs only . and use a big shot  (60 to 80 shot) .
My question is can the valves handle the big shot .


Bill
« Last Edit: December 07, 2011, 01:11:10 PM by California Kid »
RCC stage 2 turbo :Texas Mile Oct 2019 240.6 Texas Mile March 2019 237.8 ,Texas Mile 2018 227.4 ,Texas 09 199.166  March stock 08 Busa 2nd drive
Louis Heil 205.523 MPH Texas Oct 09 199.780 , Mojave 2018 217.6
Loring 09  207.837 Aug stock 08 Busa,
Mojave 2010 186.8 MPH 08 Busa.Texas 2010 march
202.3 MPH Loring 2011 July 208 MPH
Mojave 2018 217 MPH
Texas 2011 March 202 Texas Oct 2011 204.9, Mojave ,Oct 2013 215.6 , Texas Mile Oct 2013-213.6 , Mojave April 2014- 215.6

Offline Johnnnycheese

  • Post Master
  • *****
  • Posts: 1916
Re: Ti valves and Nitrous
« Reply #1 on: December 07, 2011, 02:33:26 PM »
do not use the stock ones but you can use Ti valves
Official Site Tuner
Builder and tuner of some of the FASTEST motorcycle in the world
www.johnnycheese.com

Offline California Kid

  • Rider
  • ***
  • Posts: 313
    • Bills Landspeed Racing
Re: Ti valves and Nitrous
« Reply #2 on: December 07, 2011, 05:25:59 PM »
Johnny ,
                So you are saying its ok to use the ti valves and change the valve springs . my question is will the ti valves be able to handle a big shot .

Bill
RCC stage 2 turbo :Texas Mile Oct 2019 240.6 Texas Mile March 2019 237.8 ,Texas Mile 2018 227.4 ,Texas 09 199.166  March stock 08 Busa 2nd drive
Louis Heil 205.523 MPH Texas Oct 09 199.780 , Mojave 2018 217.6
Loring 09  207.837 Aug stock 08 Busa,
Mojave 2010 186.8 MPH 08 Busa.Texas 2010 march
202.3 MPH Loring 2011 July 208 MPH
Mojave 2018 217 MPH
Texas 2011 March 202 Texas Oct 2011 204.9, Mojave ,Oct 2013 215.6 , Texas Mile Oct 2013-213.6 , Mojave April 2014- 215.6

Offline Predator

  • Rider
  • ***
  • Posts: 449
Re: Ti valves and Nitrous
« Reply #3 on: December 07, 2011, 06:10:28 PM »
I think he's saying its ok to use aftermarket ti valves, maybe they are stronger at the base of the stem?
Hayabusa, because 14's are just slow!                                           
ZX 14 its whats for dinner!

Offline Johnnnycheese

  • Post Master
  • *****
  • Posts: 1916
Re: Ti valves and Nitrous
« Reply #4 on: December 08, 2011, 07:28:32 AM »
I think he's saying its ok to use aftermarket ti valves, maybe they are stronger at the base of the stem?
:tu:
 Bill either gen 1 or SS
Official Site Tuner
Builder and tuner of some of the FASTEST motorcycle in the world
www.johnnycheese.com

Offline bryanclapper69

  • Rider
  • ***
  • Posts: 38
  • Where am I?
Re: Ti valves and Nitrous
« Reply #5 on: December 08, 2011, 09:48:47 AM »
ti are fine just keep your shot at 60 or lower 

Offline Johnnnycheese

  • Post Master
  • *****
  • Posts: 1916
Re: Ti valves and Nitrous
« Reply #6 on: December 08, 2011, 01:52:33 PM »
ti are fine just keep your shot at 60 or lower 
go ahead try that spraying a 1.5 mile run :bah:
Official Site Tuner
Builder and tuner of some of the FASTEST motorcycle in the world
www.johnnycheese.com

Offline California Kid

  • Rider
  • ***
  • Posts: 313
    • Bills Landspeed Racing
Re: Ti valves and Nitrous
« Reply #7 on: December 08, 2011, 03:21:15 PM »

           got it johnny , I will go with stock 0r ss valves .


Bill
RCC stage 2 turbo :Texas Mile Oct 2019 240.6 Texas Mile March 2019 237.8 ,Texas Mile 2018 227.4 ,Texas 09 199.166  March stock 08 Busa 2nd drive
Louis Heil 205.523 MPH Texas Oct 09 199.780 , Mojave 2018 217.6
Loring 09  207.837 Aug stock 08 Busa,
Mojave 2010 186.8 MPH 08 Busa.Texas 2010 march
202.3 MPH Loring 2011 July 208 MPH
Mojave 2018 217 MPH
Texas 2011 March 202 Texas Oct 2011 204.9, Mojave ,Oct 2013 215.6 , Texas Mile Oct 2013-213.6 , Mojave April 2014- 215.6