hello, i live in belgium so my English is not so good.
i have rebuilt a 2000 hayabusa (1450 cc, wossner pistons, yochi cams etc etc)
the bike has an old (from 2007) power commander 3 usb
and i added the lcd display... o that works no problems
but i also added a wideband commander that i had from my other busa (i changed tot pc5 and autotune for the gen2)
i use the special Y-cable and the problem is when i connect the wideband to the harness the bike turns funny and stalls
when i connect the wideband to the screen and disconnect the pc 3 it works but if i plug in the connector in the pc3 the problem happens again
i talked to the people at powercommander and i ordered a new Y-cable +the did an upgrade of the pc3 soft
but the problem stays
i check the power connections and that's all fine + with my laptop i see that the wideband works and the pc3 works also fine
i dont have a solution so please HELP
