Clutch push rod

[bomdigitytrips]

Hello I have an 03 busa and I was changing the chain and I took the clutch cover off and wanted to clean up the excess lube and I pulled the push rod out and when I put it back in it doesn't feel like it went all the way in does anybody know what length should be sticking out the side or if there is anything that can fall inside when you pull the rod out thanks for any help

[BusaBD]

You mean you pulled the sprocket cover with clutch slave on it,, and there is nothing that will drop down .I always put a little grease on rod when I put it back in. Do you think you have too much stickin out or not enough?

[bomdigitytrips]

It looks like there is too much sticking out have to wait til sprockets to get to me before I can check thank u for the help it just feels like it wasn't going in all the way

[TT]

just slap the cover back on with a couple bolts and see if its ok, i dont think there,s nothing to fall out