Haybusa Parts and Service Member Support

Author Topic: Project spare parts franken busa  (Read 10754 times)

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Project spare parts franken busa
« on: April 01, 2012, 05:56:37 PM »
So I get a call about 2 years ago from the local suzuki dealer about this drag bike. They knew I was the only one in town that would be intrested in it. I picked it up for $1500 bucks.



I posted a part out thread after stripping it down to make my money back and keep the motor. MCBUSA contacts me and tells me the history of the bike and that he was the original builder. "How awesome is that??" I kept the motor which I find out is awesome, JE pistons, Carrillo rods and CARR bolts, 1/2 studs, race tranny, HD output shaft.... Jackpot!

I sold the swing arm, sub frame, cut forks, and a few other things and made my $1500 bucks back.

Motor sat like this for a while before I got it in the blue bike



Check out these good friends that helped my tear it down



« Last Edit: April 01, 2012, 06:25:47 PM by mysticblu999 »
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #1 on: April 01, 2012, 06:05:52 PM »
After being without a street bike for what seemed like forever while I was swapping engines and doing a stage 2 on the blue bike, I decided I should have a stock bike for a daily commuter. I drive 800-1000 miles a week. My truck gets 16 mpg and my car gets 20 mpg. I had this idea, Ive got all these Hayabusa parts laying around, I want a stock bike, I want to learn the Hayabusa inside and out, what better way to do it then to build one from the ground up, from junk laying around my house and my parents. So I get all the parts to make a rolling chasis and take them in my living room with some left over BW3!







Finsihed for now!
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #2 on: April 01, 2012, 06:25:07 PM »
Just ran out and took these, I'm waiting on a stupid washer that goes behind the clutch basket so I can put the clutch on, fill it up with oil and see if she fires up!







Now I know what your thinking... yes I forgot to take some pics, but now I just need a few more parts to put in on the road.

I plan on making this bike my commuter/touring bike. I'm going to put a givi top case on it, corbin seats, gps and other comfort mods so I can actually take it to work and on trips, I really miss taking bike trips, haven't done anything like that since I went turbo. Can't wait to update, this is where the bike is at right now, Just snapped those last pics.
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline STUNNAH

  • Post Master
  • *****
  • Posts: 1582
  • Gender: Male
Re: Project spare parts franken busa
« Reply #3 on: April 01, 2012, 10:22:47 PM »
 :tu:
Getting "Blown" is a hell-of-a drug...STUNNAH...

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #4 on: April 03, 2012, 07:54:48 AM »
Any one got that washer?? I can't wait any more!!
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #5 on: April 11, 2012, 05:19:47 PM »
Fired the bike up. Cam timing way off. Motor back out.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #6 on: April 11, 2012, 05:23:21 PM »
Should have the motor back in next week. Pulled the motor out in record time 20 mins.

 

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #7 on: April 11, 2012, 08:40:10 PM »
Seriously thinking about doing gen 2 plastic

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline Penianator

  • Rider
  • ***
  • Posts: 482
  • Gender: Male
Re: Project spare parts franken busa
« Reply #8 on: May 02, 2012, 02:21:59 PM »
that guy has the full set posted for only like 600 or 800 in the for sale section. custom painted with stars.

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #9 on: May 11, 2012, 05:31:26 PM »
So I just ordered catalyst composites 08 bodywork. Can't wait to get it fitted on the bike then get it painted! Buddy of mine is about to come help me put the motor back in in about an hour or so, I'm getting excited again!
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #10 on: June 05, 2012, 07:23:53 AM »
Still waiting on the plastic......  :td:
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline walterpowelljr

  • Apprentice Post Whore
  • **
  • Posts: 15
  • Gender: Male
  • Where am I?
Re: Project spare parts franken busa
« Reply #11 on: June 05, 2012, 09:58:47 AM »
good luck

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #12 on: June 05, 2012, 11:06:59 AM »
Thanks, really hope I can finish it this summer.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #13 on: June 17, 2012, 05:34:14 PM »
Got the plastic now and he motor back in but I have no oil pressure! WTF? Took it to the engine builder and he will call me when he figures it out.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #14 on: July 01, 2012, 10:35:41 AM »
I'm an idiot.... the gear that goes behind the basket was non existent..... oh man I feel dumb. Bout to put it back together, fire it up, then test fit the new bodywork. After that then its off to the painter!  :D
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #15 on: July 06, 2012, 10:37:20 AM »
Got it running great. Now its time to get the body test fitted. Here is a pic of the gen 2 tail.

 

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #16 on: July 10, 2012, 07:52:11 AM »
Starting to look more like a street bike

 

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #17 on: July 15, 2012, 06:58:51 PM »
Just put a chain on it and bleed the clutch system to make sure it goes down the road. It was awesome to ride it but I had no headlight and it was dark. Oh well! Frank just went down the road for the first time! :moped:
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new

Offline mysticblu999

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1226
  • Gender: Male
  • turbohead
Re: Project spare parts franken busa
« Reply #18 on: November 05, 2012, 05:41:20 PM »
2013 Hayabusa tempted me. Haven't had a brand new Hayabusa since 2007. Its time. Parting this one out. Thanks for looking
2007 Hayabusa Super Ultra (in progress)    
2013 Hayabusa Limited (on order)
2008 RM250 (for jumping stuff)


Super Ultra build thread http://www.suzukihayabusa.org/forum/index.php?topic=160376.new#new