Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Brocks Alien Head - end cap and core Flew out  (Read 5456 times)

Offline zzaacckk007

  • New User!
  • *
  • Posts: 2
  • Gender: Male
  • Yep
Brocks Alien Head - end cap and core Flew out
« on: December 16, 2012, 10:44:08 PM »
So Let me start off my saying Hi, My name is zack and I have owned my Bike since October. About 3 weeks ago I did some mods to it including :

Brock's Alien Head Full Exhaust
Power Commander 5 PCV
Factory Pro Velocity Stacks
BMC Race Air Filter
Driven Smog Block off Plates
Galfer Front and Rear Stainless Steel Break lines
Vortex Swing Arm Spools
Smoked Double Bubble Windscreen
Carbon Fiber Tank Pad   
Stealth Fender Eliminator
A&R HID's and Led Running lights   
Flashed Ecu By Livengood Motor Sports   
Tuned By Livengood Motor Sports    

Below is a link to my dyno run and a couple pictures.

http://www.youtube.com/watch?v=q3Y6ZFH6cIs


But Any way my problem I had was that last night we were on the way back home on the Hwy and we had just got done blasting. We came up on a group of 18 wheeler 's so we started to slow down, and when they cleared, we all hit it the gas and when I did I herd what sounded like a built drag bike hitting the rev-limiter right beside me, So I looked down and sure enough it was me, "I thought my exhaust fell off":lol: luckily it didn't. So I pulled over and yep  (  My End Cap and My core flew off and out onto the road some where.  ) 

So my Question to you guys is do you think Brock at www.brocksperformance.com will stand by his work and fix it for me, or ????? any suggestions welcome.

Only other thing to add is I bought this Full system off eBay because I got a bundle deal and was cheaper "came with a filter and lowering links" so do you think that has any effect on the warranty if there is one ?????


Thank you all in advance for and help
Logged
[SIGPIC][/SIGPIC]Stealth Fender Eliminator*Grab Bar Hump Mod*Vortex Swing Arm Spools*Brock's Alien Head Full Exhaust*Driven Smog Block off Plates*Factory Pro Velocity Stacks*BMC Race Air Filter*PCV*Carbon Fiber Tank Pad*Flashed Ecu & Tuned By Livengood Motor Sports*A&R HID's & Led Running lights*Smoked Double Bubble Windscreen*Galfer Front and Rear Stainless Steel Braided Break lines*Trunk Mod*Powder Coated Clutch & Break Levers, Passenger Pegs & Rear Sets*Smoked Tail Light & Turn Signals[/SIZE]

Offline wildphil69

  • Post Master
  • *****
  • Posts: 1978
  • Gender: Male
Re: Brocks Alien Head - end cap and core Flew out
« Reply #1 on: December 17, 2012, 03:13:49 PM »
brock is a stand up guy...send him a message
Logged
Nitrous is like a hot chick with STD'S...You know you wanna hit it but your just not sure of the consequences.

Offline piratediverjefff

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 8540
  • Gender: Male
Re: Brocks Alien Head - end cap and core Flew out
« Reply #2 on: December 17, 2012, 04:09:10 PM »
If you bought it new from Brocks(or one of his distributors)i'm sure he'll make it right since the core/end cap on the Alien Head isn't supposed to be removable like on the Short Meg(1 Allen bolt).If you bought it used and somebody had taken the end cap/core loose at one time or another then probably not.
Logged
Build a man a fire and he'll be warm for a day,light a man on fire and he'll be warm for the rest of his life.

Offline Got-Busa?

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3023
  • Gender: Male
Re: Brocks Alien Head - end cap and core Flew out
« Reply #3 on: December 18, 2012, 08:37:07 PM »
He posted that Brock took care of it on the other site.

I'm more concerned that he posted this on several different sites WITHOUT asking Brock first?
Logged
CLICK-->  *Got-Busa's "STREET BIKE"-project* <--CLICK
"WILMINGTON MILE" - 212.7 MPH!
"ARKANSAS 1/2 MILE" - 202.566 MPH!
"ARKANSAS 2KM" 232.919 MPH!
THANK YOU SHANE STUBBS @ STPI
"TEXAS MILE" -182.265 MPH stock --204.468 MPH "Brock's Performance" basic mods -- 227.2 MPH "RCC TURBO" low boost/half naked!

Offline Rossco

  • Rider
  • ***
  • Posts: 167
Re: Brocks Alien Head - end cap and core Flew out
« Reply #4 on: December 19, 2012, 02:19:43 AM »
The right thing for him to do now is to post everywhere that he had a whine and let people know that Brock has done the righty and sorted it!!
Logged

Offline zzaacckk007

  • New User!
  • *
  • Posts: 2
  • Gender: Male
  • Yep
Re: Brocks Alien Head - end cap and core Flew out
« Reply #5 on: December 23, 2012, 12:34:05 PM »
Thanks guys for all the reply's, but just to answer a couple of questions asked: Yes it was a Brand new system, No the core was not removed, And Yes I called and E-mailed some pictures to his staff today and yes they are taking care of this issue.
Logged
[SIGPIC][/SIGPIC]Stealth Fender Eliminator*Grab Bar Hump Mod*Vortex Swing Arm Spools*Brock's Alien Head Full Exhaust*Driven Smog Block off Plates*Factory Pro Velocity Stacks*BMC Race Air Filter*PCV*Carbon Fiber Tank Pad*Flashed Ecu & Tuned By Livengood Motor Sports*A&R HID's & Led Running lights*Smoked Double Bubble Windscreen*Galfer Front and Rear Stainless Steel Braided Break lines*Trunk Mod*Powder Coated Clutch & Break Levers, Passenger Pegs & Rear Sets*Smoked Tail Light & Turn Signals[/SIZE]

Offline piratediverjefff

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 8540
  • Gender: Male
Re: Brocks Alien Head - end cap and core Flew out
« Reply #6 on: December 23, 2012, 02:53:20 PM »
Just modified my Short Meg baffle,this is all that's left of it(and sounds great,just short of an open Sidewinder). :lol:





Logged
Build a man a fire and he'll be warm for a day,light a man on fire and he'll be warm for the rest of his life.
Pages: [1]   Go Up
« previous next »