Haybusa Parts and Service Member Support

Author Topic: SHORT AIR BOX STACKS  (Read 2489 times)

Offline knecum

  • Mad Post Whore
  • ******
  • Posts: 2064
  • Gender: Male
  • The Recipe!
    • www.knecumpower.com
SHORT AIR BOX STACKS
« on: January 14, 2013, 07:44:48 PM »
Anyone know which short stacks to order for the B-King's air box? Like the trick you do in a Busa with all 4 shorts. The Busa's are to tight to go in the B-Kings air box hole. Thanks!!

Online gixxted

  • Rider
  • ***
  • Posts: 22
Re: SHORT AIR BOX STACKS
« Reply #1 on: January 27, 2013, 05:30:45 PM »
K7/8 1000 stacks might be worth a try,
 i havn't checked Bking box, but am using some on gen 2 throttle bodies in a chassis bike.

Offline canadian john

  • Rider
  • ***
  • Posts: 225
  • Gender: Male
  • Where am I?
Re: SHORT AIR BOX STACKS
« Reply #2 on: January 27, 2013, 06:09:54 PM »
I have 4,,, K7/8 1000  short stacks new in OEM package #13881-41G00 they are abit to small for gen1 box,not sure it they will fit the king

Offline moparict

  • Post Whore
  • ****
  • Posts: 737
Re: SHORT AIR BOX STACKS
« Reply #3 on: January 28, 2013, 05:52:59 AM »
Is there a reason you couldn't take the holes out a bit larger or are you wanting to keep the airbox OEM?

Offline knecum

  • Mad Post Whore
  • ******
  • Posts: 2064
  • Gender: Male
  • The Recipe!
    • www.knecumpower.com
Re: SHORT AIR BOX STACKS
« Reply #4 on: January 28, 2013, 07:25:55 AM »
Is there a reason you couldn't take the holes out a bit larger or are you wanting to keep the airbox OEM?
   You mean do I want to keep the holes in the box stock size? Of coarse the stock air box stays on. I installed the cold air kit, but when I tried to put on short stacks from a gen 2 they didn't fit right, either to loose or to tight, I will check again today.. I'm sure I can figure it out. Just thought someone knew off the top of their head which ones would work

Offline nickelcityracing

  • Post Master
  • *****
  • Posts: 1783
  • Gender: Male
    • nickelcityracing.com
Re: SHORT AIR BOX STACKS
« Reply #5 on: February 04, 2013, 08:19:16 AM »
Steve , I used the ones from my 03 busa on my B king,  I had to make the holes a bit bigger but then they went in fine..... good luck
Trillium Muir  241.3 mph
Jody-242.2 mph
Thanks RCC-JE-MTC-Elka-Canadian Mike-Suzuki Canada-Pazzo-Brocks-Hindle-North Bay cycle-Crower Rods