Shift Light?

[Abusive]

Where can i get a tach signal for a shift light? What color wire and where is it located? Thanks in advance!

[bluebusaking]

you bike has a factory shift light fitted, find the wire behind the dash or run a wire off the light wire.

[fubar569]

I suggest relocating the stock LED's to a more visible location...the shift light works but is worthless for racing being in the lower left corner of the dash.

1. Press and hold the left (SELECT) button.
2. Turn the ignition on, continue to hold the select button down until the instrument panel boots up .
3. Release the select button.
4. Press the right (ADJUST) button one time.
5. A symbol that resembles a lightning bolt will appear.
6. Pressing the right button again will toggle through the shift light settings --- on, flash or off.
7. Press the left (SELECT) button again... one time.
8. Little dots/squares appear - this is the brightness setting for lamp.
9. Press the right button to add more dots - more dots brighter lamp.
10. Press the left (SELECT) button again- tach needle will move to default setting.
11. Press the right (ADJUST) button to move the tach needle to the desired setting.
( 500rpm increments below 8000 rpm, 250 above 8000 rpm)
12. Press the left (select) button to exit out.