ecu

[mikebeaek21]

i just bought a gen2 hayabusa...
how to save current map from ecu???
the last owner sent the ecu in a service and i want to make some changes(nitrous control and fuel add),only.
does anyone knows how???
from ecueditor or woolichracing software???
any videos tha shows how,should be ideal...

[firemanjim]

Not at my computer but look here at Woolrich.Pretty sure ECU Editor works similar.
http://www.woolichracing.com/SupportCenter/Item/29/reading-an-ecu-includes-instructions-and-video-tutorial.aspx

[Johnnnycheese]

Ecu editor you load a stock map ( do not flash it)then you can pull the map in the ecu out and save it

[mikebeaek21]

Ecu editor you load a stock map ( do not flash it)then you can pull the map in the ecu out and save it

i can pull it out by clicking the save button???
when i do that a window on my pc opens....i put the map there?
did it....
but how can i make changes if it is in a bin file???
i must sent it back to ecu,make the changes i want and then flash it???

[Johnnnycheese]

I am almost to the shop I do think it is checksum you click but give me an hour to check

[Johnnnycheese]

Ok open ecu editor
Then open a new map for 15h
Then turn your flasher to flash
Turn check on bike in neutral
In the drop down menu under ecu tool check verify/ read
And wait 8-12 minutes
Once it is verified save it. Then you can map changes.

[mikebeaek21]

Ok open ecu editor
Then open a new map for 15h
Then turn your flasher to flash
Turn check on bike in neutral
In the drop down menu under ecu tool check verify/ read
And wait 8-12 minutes
Once it is verified save it. Then you can map changes.

map verified.map saved...
i saved it in a bin file in my pc.
i can do ecu changes now e.g activate,nitrous contr or dragtools stuff???
which map do i have know in ecu,mines and i have a backup map in my pc???
 

[sportbikeryder]

Ok open ecu editor
Then open a new map for 15h
Then turn your flasher to flash
Turn check on bike in neutral
In the drop down menu under ecu tool check verify/ read
And wait 8-12 minutes
Once it is verified save it. Then you can map changes.

map verified.map saved...
i saved it in a bin file in my pc.
i can do ecu changes now e.g activate,nitrous contr or dragtools stuff???
which map do i have know in ecu,mines and i have a backup map in my pc???
 

The map in teh ECU is the same as it was before. The map on your computer is a copy of the map in the ecu.

[mikebeaek21]

Ok open ecu editor
Then open a new map for 15h
Then turn your flasher to flash
Turn check on bike in neutral
In the drop down menu under ecu tool check verify/ read
And wait 8-12 minutes
Once it is verified save it. Then you can map changes.

map verified.map saved...
i saved it in a bin file in my pc.
i can do ecu changes now e.g activate,nitrous contr or dragtools stuff???
which map do i have know in ecu,mines and i have a backup map in my pc???
 

The map in teh ECU is the same as it was before. The map on your computer is a copy of the map in the ecu.

so,can make my changes in the ecu without fear of loosing the already tuned map
cause i have already saved it...
am i right?
thanks,sir...

[mikebeaek21]

hi.
i need your help again...   if you want!
i"m trying to connect to ECU EDITOR.COM but i can"t for the last two days...last week it was ok.
i just make windows change to my pc from win7 to win8...
the fault i see says CAN"T FOUND  (DLL "FTD2XX.DLL"
AND HRESULT:0X8007007E)
can you help me,please???

[Johnnnycheese]

This I can not help with I have ALWAYS used XP even my brand new computer loaded with XP . Even dyno junk stuff works better on XP. Maybe someone without it will chime in

[mikebeaek21]

i"ll try xp in my old pc and i post again to let you know...
thanks anyway...