TECHNICAL > F.A.Q
clutch pressure lost, unable to engage 1st gear
ErrEs:
Got stuck halfway a ride today. Lost all pressure on the clutch and couldn't even get it into first in the end. My first guess would be a broken seal which allows air into the system. Any other ideas? (1st gen '02 with 13000mi)
wildphil69:
it would be leaking if you blew a seal or hose. check fluids and check clutch for broken plates
sportbikeryder:
Check the sprocket cover. Likely cracked and no longer reacting the clutch slave force.
dadofthree:
When you pull that slave cover , clean all the crap off the piston and clean it up good, but first off check that fluid level, if it's low you'll probably need a seal.
ErrEs:
Turns out to be the master cylinder. I'm waiting for parts now. Because I only recently bought the bike from a dealer (less than 400km since purchase) I called them and told them they have to fix it. Should be ready halfway next week. (or so I hope)
Navigation
[0] Message Index
[#] Next page
Go to full version