Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: can ecu be programmed for 2step on '05 busa  (Read 3205 times)

Offline turbojoe7805

  • Rider
  • ***
  • Posts: 74
  • Gender: Male
can ecu be programmed for 2step on '05 busa
« on: August 25, 2014, 07:55:29 PM »
what are my options for 2step?
Logged

Offline Rossco

  • Rider
  • ***
  • Posts: 167
Re: can ecu be programmed for 2step on '05 busa
« Reply #1 on: August 26, 2014, 02:02:26 AM »
Yes with RomRaider.
If you using ECU shifter then no, they have a punch up if used together.
« Last Edit: August 26, 2014, 02:05:18 AM by Rossco »
Logged

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: can ecu be programmed for 2step on '05 busa
« Reply #2 on: August 26, 2014, 07:19:25 AM »
Quote from: Rossco on August 26, 2014, 02:02:26 AM
Yes with RomRaider.
If you using ECU shifter then no, they have a punch up if used together.

I've used a 2 step along with shifting many times. 2 step has to be programmed in rom raider or similar, then the shifter programmed in ECU Editor.

Woolich Racing Tuned software should work for a 2 step as well.
Logged
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline Rossco

  • Rider
  • ***
  • Posts: 167
Re: can ecu be programmed for 2step on '05 busa
« Reply #3 on: August 26, 2014, 06:18:06 PM »
Cool, VERY happy to be wrong on that one  :D
You using neutral limiter for 2step in rom raider?
Ignition cut ONLY?
PM'd

« Last Edit: August 26, 2014, 06:38:16 PM by Rossco »
Logged

Offline GBUSA

  • Post Whore
  • ****
  • Posts: 797
Re: can ecu be programmed for 2step on '05 busa
« Reply #4 on: September 03, 2014, 10:11:18 AM »
 8)
Logged
9.36@148 wit bone stock motor @ 60"
Pages: [1]   Go Up
« previous next »